{"title":"Busts","description":"\u003cp\u003eBust resin kits: the figure from the chest or waist up on its own plinth. Every kit ships raw: unassembled, unprimed, unsanded and unpainted.\u003c\/p\u003e","products":[{"product_id":"anime-spiked-armor-helmet-plume-bust-resin-garage-kit","title":"Anime Spiked Armor Bust Resin Garage Kit – Riveted Helmet, Long Plume \u0026 Round Plinth (Unpainted, 5 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 5 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the hulking, soul-bound suit of armor from a classic adventure anime. There is no face and no skin, just the armor, cut at the chest and tipped forward on an angled stem so the helmet leans toward you. The helmet has a rounded dome with a raised crest fin, a riveted brow band, a pointed visor and slits at the mouth over a wide jaw plate. A knit cloth wrap fills the collar under the chin. The chest is two overlapping plates with round rivet bosses and a small slotted grille, and the big pauldrons each carry cone spikes along a curved lip. The whole shell has a lightly pitted, hammered finish, with a seam and rivets down the back. A long plume rises from the helmet crest, loops back over the helmet and falls down one side to a curled tip. The base is a round stepped plinth with four wedge-shaped bracket feet and a rectangular stem.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 4 pieces:\u003c\/strong\u003e the armor shell with the spiked pauldrons, the helmet, the knit neck cloth and the long helmet plume.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its angled stem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 164 mm (6.46 in) tall, 193 mm (7.60 in) wide and 162 mm (6.38 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plume is a long, thin ribbon that hangs out well past the armor from a small join at the crest. Pin that join, and clip the plume's supports slowly.\u003c\/li\u003e\n\u003cli\u003eThe bust tips forward on the stem, so the stem-to-armor join carries the weight. Pin it.\u003c\/li\u003e\n\u003cli\u003eThe helmet seats inside the collar and the neck cloth hides that join.\u003c\/li\u003e\n\u003cli\u003eThe armor shell and the plume are the two big parts; the spikes are part of the shell, not separate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 5 pieces","offer_id":67610486014181,"sku":"TNK-A-0033","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-spiked-armor-helmet-plume-bust-resin-kit-01.jpg?v=1791089392"},{"product_id":"anime-boar-mask-swordsman-bust-chipped-blade-round-plinth-resin-garage-kit","title":"Anime Boar-Mask Swordsman Bust Resin Garage Kit – Chipped Sword Across the Shoulders \u0026 Round Plinth, Masked and Unmasked Heads Included (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the wild, boar-masked swordsman from a hugely popular demon-hunting anime. He wears a full boar's head as a mask, with upright pointed ears, a flat snout with two nostrils, two short tusks and round staring eyes ringed in circles, and the fur thickens into a spiky ruff where the mask meets his neck. He is bare-chested, as he always fights, with his raised arm bent behind his head and the fist closed around a wrapped hilt, so the long sword lies across the back of his neck and shoulders with its tip out past the other side. The blade has a row of jagged chips along its edge, no guard and a cloth-wrapped grip with a square opening at the pommel. The bust is cut in a diagonal below the chest and stands on a squared, tapered column over a round plinth with a raised disc top and four wedge brackets. Both heads are in the box, so you can swap them as you like: the boar mask, or an unmasked head with long hair and a separate fringe (the sculptor has no render of the unmasked head).\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total. Both heads are in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 4 pieces:\u003c\/strong\u003e the bare-chested torso, the raised arm gripping the hilt, the chipped sword, and the round plinth with its column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoar-mask head, 1 piece:\u003c\/strong\u003e the full boar-head mask with ears, snout, tusks and fur ruff.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmasked head, 2 pieces:\u003c\/strong\u003e the face with long hair, and the hair fringe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 135 mm (5.31 in) tall, 162 mm (6.38 in) wide and 132 mm (5.20 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe sword is very thin and runs across the shoulders with nothing under most of its length. Pin the hilt into the fist.\u003c\/li\u003e\n\u003cli\u003eThe arm joins the torso at the shoulder on smooth skin. Pin it, then fill and sand that seam.\u003c\/li\u003e\n\u003cli\u003eThe neck join hides under the mask's fur ruff or the long hair.\u003c\/li\u003e\n\u003cli\u003eThe ear tips, tusks, fur spikes and the fringe's hair strands are thin points.\u003c\/li\u003e\n\u003cli\u003eBoth heads are in the kit. Leave the neck joint unglued (a pin holds it) if you want to swap them later.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Full kit with both heads, 7 pieces","offer_id":67610486669541,"sku":"TNK-A-0011","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-boar-mask-swordsman-bust-chipped-blade-round-plinth-resin-kit-01_569a16e4-3388-4d74-85c8-ceb295a67138.jpg?v=1791146246"},{"product_id":"anime-braided-hero-bust-mechanical-arm-blade-resin-garage-kit","title":"Anime Braided Fighter Bust Resin Garage Kit – Mechanical Arm, Arm Blade \u0026 Hooded Coat (Unpainted, 12 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 12 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the braided young hero with the mechanical arm from a classic adventure anime, caught mid-swing. He twists to one side with his chin down and his mechanical right arm cocked up across his chest, the fist clenched at head height, and he shouts with his teeth bared. His long fringe falls to his jaw, a single spike of hair stands up from the crown, and a three-strand braid whips up and back behind his head. He wears a hooded coat with a woven texture, a cross-and-serpent emblem raised on the back and the chest and the right sleeve torn away at the elbow, and a long blade runs forward from the top of his mechanical forearm past his face. The bust stands on a square pillar over a round dais with four pointed buttresses.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead and hair, 3 pieces:\u003c\/strong\u003e the head with the shouting face, and the hair in two pieces with the flying braid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorso, 2 pieces:\u003c\/strong\u003e the torso and the hooded coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical arm, 5 pieces:\u003c\/strong\u003e two arm sections, the forearm unit, the clenched fist and the wrapped wrist cuff.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArm blade, 1 piece:\u003c\/strong\u003e fits on top of the mechanical forearm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round dais and pillar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 137 mm (5.39 in) tall, 132 mm (5.20 in) wide and 102 mm (4.02 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe mechanical arm is five small pieces plus the blade, and its joins land on smooth metal. Dry-fit the whole arm before gluing and use the sculpted panel lines to hide the seams.\u003c\/li\u003e\n\u003cli\u003eThe braid is a long, thin piece that sticks out behind the head. Pin it.\u003c\/li\u003e\n\u003cli\u003eThe arm blade is thin and easy to knock off. Fit it last, after painting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Hooded coat with arm blade, 12 pieces","offer_id":67610487029989,"sku":"TNK-A-0016","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-braided-hero-bust-mechanical-arm-blade-resin-kit-01.jpg?v=1791089550"},{"product_id":"video-game-gunslinger-witch-bust-raised-pistol-round-plinth-resin-garage-kit","title":"Video Game Gunslinger Witch Bust Resin Garage Kit – Pistol Behind Head, Tall Wrapped Hair \u0026 Round Plinth (Unpainted, 11 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 11 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the glasses-wearing gunslinger witch from a stylish action video game, cut off at the waist and set on a tapered post above a round stepped plinth. Her left arm is raised and hooked behind her head, holding a double-barreled pistol flat behind her hair, and her right arm is thrust forward across her front, wrapped in three buckled belts. Her hair rises into a very tall wrapped column banded with chain, two long flat ribbons hang from the back of her head, and a curtain of hair hangs from the raised elbow. She wears thick-rimmed glasses, drop earrings and a high-collared leather-look bodysuit edged with chain, with a large round medallion at the throat. The sculptor's renders of this bust are unpainted gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e11 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure, 9 pieces:\u003c\/strong\u003e torso, head, raised arm, hand with the pistol, and five hair pieces (including the tall wrapped hair and the curtain that hangs from the elbow).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlasses, 1 piece:\u003c\/strong\u003e the thin frames, which fit last.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round stepped plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTallest single piece:\u003c\/strong\u003e a long hair piece, 128.0 mm (5.04 in) in the sculptor's file. The studio's guide for this bust repeats the full statue's dimensions, so I don't list an assembled height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e 67.6 × 67.8 mm (2.66 × 2.67 in) across in the sculptor's file.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe raised arm and the pistol hand reach up and out behind the head. Pin the arm at the shoulder and the hand at the wrist.\u003c\/li\u003e\n\u003cli\u003eThe glasses are the smallest and most fragile part. Fit them last, after paint.\u003c\/li\u003e\n\u003cli\u003eThe long hair pieces and the hair curtain are thin for their length. Dry-fit them before gluing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 11 pieces","offer_id":67610487292133,"sku":"TNK-A-0046","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-gunslinger-witch-bust-raised-pistol-round-plinth-resin-kit-01.jpg?v=1791089620"},{"product_id":"anime-cloaked-ninja-two-crows-round-pedestal-bust-resin-garage-kit","title":"Anime Cloaked Ninja Bust Resin Garage Kit – Two Crows Taking Flight, High-Collared Cloak \u0026 Round Pedestal (Unpainted, 6 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 6 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the quiet, long-haired rogue ninja from a famous ninja anime, cut at mid-chest and set on a short post above a round pedestal. His head is tipped down and a little to one side, eyes lowered and mouth set, with lines sculpted under the eyes. His long hair is parted in the center with strands falling either side of his face and a low ponytail at the back, under a riveted metal forehead plate with a sculpted emblem. He wears a cloak with a tall, flared collar with ragged edges and a coarse woven texture, over a mesh undershirt with a net V at the throat and a cord necklace with a small pendant. Above him two crows take flight with their wings spread wide, one lifting away with its beak open and the other gripping the top of his hair as it takes off, with feather wisps trailing from its wing. The pedestal is a stepped round plinth with four angular lugs around the rim. The studio's renders are unpainted gray; the cloak's cloud pattern is paint work.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 3 pieces:\u003c\/strong\u003e the head, a loose hair strand, and the chest with the cloak, collar, mesh shirt and necklace.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrows, 2 pieces:\u003c\/strong\u003e the two crows with spread wings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePedestal, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 124 mm (4.88 in) tall, 161 mm (6.34 in) wide and 110 mm (4.33 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoth crows hang above the bust on thin wings, one perched on the top of the hair by its talons. Pin each crow and fit them after the head is glued.\u003c\/li\u003e\n\u003cli\u003eThe loose hair strand is small and thin; fit it with tweezers.\u003c\/li\u003e\n\u003cli\u003eThe collar tips and the crows' wing feathers are thin points that break easily during support removal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 6 pieces","offer_id":67610487488741,"sku":"TNK-A-0020","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-cloaked-ninja-two-crows-round-pedestal-bust-resin-kit-01.jpg?v=1791089625"},{"product_id":"video-game-scarred-swordswoman-fur-collar-back-sword-bust-resin-garage-kit","title":"Video Game Scarred Swordswoman Bust Resin Garage Kit – Fur Collar, Braided Hair \u0026 Sword Across the Back (Unpainted, 6 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 6 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the white-haired swordswoman from a famous dark-fantasy video game series. Her shoulders face forward while her head turns hard over her right shoulder in a hard scowl, with a scar down her left cheek. Her hair is center-parted and pulled back, with a braid along one side into a twisted knot and a long braid bound in leather strips falling over the collar. She wears a shaggy fur collar, mantle panels and pauldrons with a mail-link pattern and looped cord, a padded quilted leather jacket with buckled straps, and a small fanged medallion on a chain at her throat. A sword with a faceted pommel and a twisted crossguard rides in a long sheath across her back beside a second sheath. The bust sits on a tapered post above a round stepped plinth with wedge blocks around the rim. The studio's renders are unpainted gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 3 pieces:\u003c\/strong\u003e the torso with the fur collar and armor, the head, and the long braid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSword and sheath, 2 pieces:\u003c\/strong\u003e the sword and a separate sheath piece for the back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 135 mm (5.31 in) tall, 95 mm (3.74 in) wide and 82 mm (3.23 in) deep (from Tanuki Figures' notes file).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe head joins the torso at the neck, where the front of the neck is bare skin, so that seam may need filling.\u003c\/li\u003e\n\u003cli\u003eThe long braid lies over the fur collar and down the chest; the fur texture hides its seam well.\u003c\/li\u003e\n\u003cli\u003eThe sword, its twisted crossguard, the braid and the sheath are thin. Remove supports from them slowly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 6 pieces","offer_id":67610488242405,"sku":"TNK-A-0048","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-scarred-swordswoman-fur-collar-back-sword-bust-resin-kit-01.jpg?v=1791089698"},{"product_id":"anime-elf-mage-bust-twin-tails-capelet-resin-garage-kit","title":"Anime Elf Mage Bust Resin Garage Kit – Swinging Twin Tails, Flared Capelet \u0026 Finned Round Pedestal (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the elf mage from a popular fantasy anime. Her head is turned hard to one side and her long twin tails swing out with the movement, one whipping forward around her shoulders and the other arcing high behind her. She has long pointed ears with drop earrings, center-parted bangs and a calm, almost blank expression. She wears a high band collar with a button and a wide bell-shaped capelet with piped edges, open down the front, with a strap and buttons at the shoulders, over a fitted top sculpted in horizontal bands, a wide belt with a rectangular buckle and a short flared skirt. The bust stands on a short post over a round two-tier pedestal with pointed fins around the edge. The renders are unpainted gray sculpts.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e the torso, the capelet, the head, a separate hair section and the two twin tails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round finned pedestal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 132 mm (5.20 in) tall, 104 mm (4.09 in) wide and 96 mm (3.78 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach twin tail is a long hanging piece held only at its root on the back of the head. Pin both.\u003c\/li\u003e\n\u003cli\u003eThe capelet is a thin, wide shell with a cupped underside. Remove the supports from its edges slowly.\u003c\/li\u003e\n\u003cli\u003eThe drop earrings hang free under the ears and are fragile.\u003c\/li\u003e\n\u003cli\u003eThe eyes are sculpted blank, with lash lines only, so the irises are painted by hand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 7 pieces","offer_id":67610488307941,"sku":"TNK-A-0021","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-elf-mage-bust-twin-tails-capelet-resin-kit-01.jpg?v=1791089699"},{"product_id":"anime-green-armor-horned-helmet-long-haired-fighter-bust-resin-garage-kit","title":"Anime Armored Fighter Bust Resin Garage Kit – Horned Spiked Helmet, Clawed Shoulder Plates \u0026 Long Hair Cape (Unpainted, 15 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 15 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the long-haired armored fighter from a classic anime about mythic warriors in zodiac armor, cut at the chest and caught in a fighting pose. His right arm is drawn back with the fist clenched and his left arm is raised out to the side with the hand open and the fingers curled, a round shield with a star-shaped boss strapped to that forearm. He wears a helmet shaped like a beast's head with cheek guards, two long curving horns and a fan of spikes, shoulder plates with three hooked talons each, a chest plate with a small square panel, and a grooved collar ring, with cloth wraps around both forearms. His long hair falls in two strands down the front and as a wide pleated cape down his back. The bust sits on a square post above a round plinth with angular tabs around the rim. The studio's renders are unpainted gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e15 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 8 pieces:\u003c\/strong\u003e head, neck, torso, two arms, helmet and two shoulder plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHair, 4 pieces:\u003c\/strong\u003e the pleated hair cape for the back and three hair strands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield, 2 pieces:\u003c\/strong\u003e the round shield in two pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 153 mm (6.02 in) tall, 138 mm (5.43 in) wide and 162 mm (6.38 in) deep (from Tanuki Figures' notes file).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe raised left arm reaches well out from the body with the shield on it. Pin it at the shoulder.\u003c\/li\u003e\n\u003cli\u003eThe helmet horns and spikes, the shoulder talons, the open fingers and the three thin hair strands are fragile.\u003c\/li\u003e\n\u003cli\u003eThe hair cape is a broad, thin pleated sheet that sets the back view; fit it after the head and helmet are on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 15 pieces","offer_id":67610488471781,"sku":"TNK-A-0025","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-green-armor-horned-helmet-long-haired-fighter-bust-resin-kit-01.jpg?v=1791089768"},{"product_id":"anime-horned-giant-ribbon-moustache-scaled-cape-bust-resin-garage-kit","title":"Anime Horned Pirate Giant Bust Resin Garage Kit – Huge Curved Horns, Ribbon Moustache \u0026 Feathered Scale Cape (Unpainted, 11 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 11 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the horned giant who leads a monstrous pirate crew in a famous pirate anime, cut at the upper stomach and set on a post above a round pedestal. He faces front with his head pushed forward and down in a snarl: brows driven down hard over deep-set eyes, veins across the forehead, a broad nose and a wide grimace showing both rows of clenched teeth, with a short spiky goatee. Two huge ridged horns grow from his temples, run out to the sides and curve up into tall points. A wide mane of long, flat strands with squared, folded ends is swept back off his forehead and splays out past his shoulders, and two long ribbon-like moustache strands sweep out from his upper lip, one over his shoulder and one down across his chest. He is bare-chested, with a scale tattoo engraved over one side of the chest and shoulder and a ragged scar across his stomach. A cape of overlapping pointed scales, ribbed like feathers, covers his back and one shoulder. The pedestal is a stepped round plinth with angular buttress blocks around the rim. The studio's renders are unpainted gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e11 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 9 pieces:\u003c\/strong\u003e the torso in two halves, the head, the mane in two halves, two horns and the two moustache strands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCape, 1 piece:\u003c\/strong\u003e the scaled cape over his back and shoulder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePedestal, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 253 mm (9.96 in) tall, 193 mm (7.60 in) wide and 189 mm (7.44 in) deep (from Tanuki Figures' store page for this bust).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe torso comes in two heavy halves. Glue and pin them first, then pin the torso onto the pedestal post.\u003c\/li\u003e\n\u003cli\u003eThe horns are long and curve out from the temples. Pin both into the head.\u003c\/li\u003e\n\u003cli\u003eThe two moustache strands are long, flat and very thin, and hang free from the lip. Pin them if you can and fit them last.\u003c\/li\u003e\n\u003cli\u003eThe mane's two halves and the cape carry hundreds of thin, squared strand ends and scale edges; take care removing supports.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 11 pieces","offer_id":67610488504549,"sku":"TNK-A-0026","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-horned-giant-ribbon-moustache-scaled-cape-bust-resin-kit-01.jpg?v=1791089769"},{"product_id":"video-game-white-haired-swordsman-eight-heads-bust-resin-garage-kit","title":"Video Game White-Haired Swordsman Bust Resin Garage Kit – Fur Collar, Riveted Armor \u0026 Sword Over the Shoulder, All Eight Heads Included (Unpainted, 16 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 16 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the white-haired monster slayer from a celebrated fantasy role-playing game, cut off at mid-chest on a round stepped plinth. His shoulders sit square and his head turns a little and tips down, looking out from under a heavy brow with a hard, lined face and a scar through one brow. His hair is combed straight back and tied in a short tail. He wears a deep fur collar over a high stitched leather collar, a wolf-head medallion at his throat, a pebbled leather jerkin studded with rivets and crossed by two wide buckled straps with metal rings, a point of chainmail at the bottom, and rounded steel plates on the upper arms. A sword in a tooled leather scabbard rises behind one shoulder, its long twisted crossguard and round pommel above his head, with a second capped scabbard beside it. All eight interchangeable heads are in the box, along with a pair of small round glasses, so you can swap them as you like.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 1 piece:\u003c\/strong\u003e the torso with the fur collar and armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeads, 8 pieces:\u003c\/strong\u003e long or short hair, with a beard or clean-shaven, and with only the thin scar through the brow or with heavier scarring across the temple and cheek, in every combination. Every head takes the same tied ponytail piece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHair and glasses, 2 pieces:\u003c\/strong\u003e the tied ponytail and the round glasses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack gear, 4 pieces:\u003c\/strong\u003e the sword hilt, two scabbards and a small crossbow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round stepped plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 155 mm (6.10 in) tall, 101 mm (3.98 in) wide and 90 mm (3.54 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAll eight heads fit the same neck, so dry-fit your chosen head and the ponytail before gluing.\u003c\/li\u003e\n\u003cli\u003eThe sword hilt sits in the mouth of a scabbard on his back. Dry-fit both scabbards before gluing; they are close in size.\u003c\/li\u003e\n\u003cli\u003eThe round glasses are a tiny, thin part that touches the nose and both ears. They are optional.\u003c\/li\u003e\n\u003cli\u003eThe fur collar, the chainmail and the tooled scabbards are where the paint work goes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Full bust kit with all eight heads, 16 pieces","offer_id":67610488570085,"sku":"TNK-A-0050","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-white-haired-swordsman-eight-heads-bust-resin-kit-01_8b91e5c8-86e5-40f3-b6d8-d6e4b69dd57d.jpg?v=1791146244"},{"product_id":"anime-horned-woman-raised-goblet-bust-resin-garage-kit","title":"Anime Horned Woman Bust Resin Garage Kit – Raised Goblet, Beaded Web Bodice \u0026 Round Plinth (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the horned, black-haired succubus from a popular dark-fantasy anime. The bust is cut just below the chest and finishes in a short ruffled hem. She turns her head and tips it down toward a stemmed goblet she raises in her right hand at shoulder height, smiling with her mouth closed, as if about to make a toast. Two horns curve forward from her temples, a single long strand stands up from her crown, and her bangs sweep across her face to cover one eye. She wears an off-the-shoulder gown with a narrow band at the neck, loose sleeve drapes wrapped around the upper arms, and a web of raised cords with small beads at every crossing laid over the bodice. The goblet has an engraved bowl and a small hooked loop on the rim. Her long, wavy hair falls down her back past the cut of the bust, with one strand sweeping out to the side. The base is a round plinth with a bevelled rim, four faceted notches and a square pillar that rises to meet the bust.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e the head with the long back hair, the torso with the bodice and sleeve drapes, the front hair lock, two horns, and the right hand holding the goblet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its center pillar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 143 mm (5.63 in) tall, 136 mm (5.35 in) wide and 120 mm (4.72 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe head with the long back hair is the heaviest piece, and its weight sits behind the neck. Pin the neck join and the top of the plinth pillar.\u003c\/li\u003e\n\u003cli\u003eThe front hair lock, the strand on the crown, the goblet stem and the small loop on the goblet rim are thin. Clip their supports slowly.\u003c\/li\u003e\n\u003cli\u003eThe two horns are small and seat at the temples against the hair.\u003c\/li\u003e\n\u003cli\u003eThe web of cords and beads on the bodice is sculpted in relief, so a fine brush picks it out without freehand work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 7 pieces","offer_id":67610489094373,"sku":"TNK-A-0027","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-horned-woman-raised-goblet-bust-resin-kit-01.jpg?v=1791089841"},{"product_id":"anime-red-haired-sand-gourd-fighter-clawing-hand-bust-resin-garage-kit","title":"Anime Red-Haired Sand Fighter Bust Resin Garage Kit – Clawing Hand, Two-Finger Sign \u0026 Woven Shawl, Both Faces Included (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the red-haired sand-wielding fighter from a famous martial-arts anime, cut off at mid-chest. His right arm thrusts out toward the viewer with the fingers bent into a claw, and his left hand is raised beside his chest with two fingers held straight up together. He grins wide through clenched teeth, his green eyes wide open inside heavy dark rings, with a red character marked on his forehead and spiky red hair. He wears a dark gray woven tunic with mesh cuffs on the short sleeves, a thick pale woven shawl over one shoulder, and a wide stitched leather strap with a square buckle across his chest. Both heads are in the box: one with a crust of cracked sand armor flaking off his skin, and one with a clean face. Swap them as you like.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 4 pieces:\u003c\/strong\u003e torso, two arms and the shawl.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeads, 2 pieces:\u003c\/strong\u003e the head with the cracked sand-armor face and the head with the clean face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the display plinth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 122 mm (4.80 in) tall, 118 mm (4.65 in) wide and 100 mm (3.94 in) deep (from Tanuki Figures' notes for this kit).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe right arm reaches straight out toward the viewer from the shoulder. Pin it.\u003c\/li\u003e\n\u003cli\u003eThe shawl drapes over one shoulder and down the front. Dry-fit it with the arms in place before gluing.\u003c\/li\u003e\n\u003cli\u003eThe spread fingers, the raised two-finger sign and the hair spikes are thin.\u003c\/li\u003e\n\u003cli\u003eThe paint carries this bust: skin, dark eye rings, the sand-armor crust and its cracks, woven cloth and leather.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust with both heads, 7 pieces","offer_id":67610489159909,"sku":"TNK-A-0029","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-red-haired-sand-gourd-fighter-clawing-hand-bust-resin-kit-01_886f2776-c390-461f-8a1e-d0aeddd1c5ad.jpg?v=1791146236"},{"product_id":"anime-six-eyed-swordsman-bust-outstretched-sword-stepped-plinth-resin-garage-kit","title":"Anime Six-Eyed Swordsman Bust Resin Garage Kit – Outstretched Sword Arm, Patterned Kimono \u0026 Long Mane (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the six-eyed swordsman from a hugely popular sword-fighting anime set in old Japan. He holds a guard pose: his bare right arm comes straight out from the shoulder, and his fist grips the sword with the wrapped grip up and the blade pointing down past his hip. His head is level and turned slightly toward you, with three pairs of narrowed eyes, branching markings across the cheeks and brow, and a calm, closed mouth. A long, heavy mane of hair rises from a high knot at the crown, falls over both shoulders and sweeps down behind his back almost to the base, with one lock over the forehead. The kimono is sculpted with a hexagon lattice filled with a fine scale texture, one sleeve has slipped off the shoulder and trails out to the side as a long loose swath, and a broad sash is wrapped twice round the waist and tied at the front with a hanging tail. The bust is cut just above the waist and sits on a stepped round plinth with four angular tabs.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure, 6 pieces:\u003c\/strong\u003e the torso with the patterned kimono, sash and trailing sleeve, the head, the main hair mane, a smaller hair section, the outstretched arm and a sword piece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the stepped round plinth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 178 mm (7.01 in) tall, 157 mm (6.18 in) wide and 207 mm (8.15 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe main hair mane is a large piece that hangs off the back of the head and down behind the torso. Glue it at more than one contact point and consider a pin into the back.\u003c\/li\u003e\n\u003cli\u003eThe arm sticks straight out from the shoulder and holds the sword. Pin the shoulder join.\u003c\/li\u003e\n\u003cli\u003eThe trailing sleeve is a broad, thin sheet and the hair has dozens of tapered strand tips. Take the supports off them slowly.\u003c\/li\u003e\n\u003cli\u003eThe sword piece is the thinnest part in the kit. Fit it last.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Full kit, 7 pieces","offer_id":67610494337253,"sku":"TNK-A-0088","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-six-eyed-swordsman-bust-outstretched-sword-resin-kit-01.jpg?v=1791091219"},{"product_id":"anime-white-haired-grinning-fighter-bust-punching-fist-billowing-cape-resin-garage-kit","title":"Anime White-Haired Grinning Fighter Bust Resin Garage Kit – Punching Fist, Spiral Curls \u0026 Billowing Cape (Unpainted, 6 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 6 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the rubber-limbed young captain from a famous anime pirate series, in his white-haired awakened form, caught mid-punch. His right arm drives forward and up, fully extended, ending in a tight fist with a raised vein along the forearm, and his shoulders twist into the swing as his head leans in. His face is one huge clenched grin, with ringed eyes, brows that curl at the inner ends and a stitched scar under one eye. The hair is a big mass of cloud-like locks: two large spiral curls at the front, a tall flame-shaped tuft at the crown and side locks streaming back into pointed tips. He wears an open shirt in a fine woven texture, with a flared turned-back cuff on the punching arm and a row of round buttons, over a muscular bare chest, and a cape in the same weave sweeps back off one shoulder and billows out behind him with a wavy, rolled hem. The bust is cut at the waist and leans forward on a ridged post over a round plinth with wedge-shaped buttresses around its rim.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure, 5 pieces:\u003c\/strong\u003e the head, the torso, the open shirt with the cape, the punching arm and the fist.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 128 mm (5.04 in) tall, 150 mm (5.91 in) wide and 108 mm (4.25 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe punching arm and fist reach straight out from the shoulder. Pin the shoulder and the wrist.\u003c\/li\u003e\n\u003cli\u003eThe shirt and cape are one large, thin piece that billows out behind him; it is the biggest part in the kit. Dry-fit it over the torso before gluing.\u003c\/li\u003e\n\u003cli\u003eThe bust leans forward on its post and the fist and cape overhang the plinth on both sides. Pin the torso onto the post.\u003c\/li\u003e\n\u003cli\u003eThin parts: the tall hair tuft, the flame-like hair tips and the flared sleeve cuff.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Full kit, 6 pieces","offer_id":67610494402789,"sku":"TNK-A-0090","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-white-haired-grinning-fighter-bust-punching-fist-resin-kit-01.jpg?v=1791091221"},{"product_id":"anime-blindfolded-white-haired-sorcerer-crossed-fingers-bust-resin-garage-kit","title":"Anime Blindfolded White-Haired Sorcerer Bust Resin Garage Kit – Crossed-Finger Hand Sign, Tall Woven Collar \u0026 Round Plinth (Unpainted, 5 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 5 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the blindfolded, white-haired sorcerer-teacher from a popular supernatural action anime. He is cut off at mid-chest and turns his head slightly toward his raised right hand, which is held up beside his face with the index and middle fingers crossed and pointing up. A wide mesh blindfold wraps around his head over the eyes, his hair bursts up above it in a crown of flame-shaped spikes and is cropped short at the back, and he smiles easily with his lips just parted. He wears a boxy uniform jacket sculpted all over in a coarse woven texture, with a very tall rolled standing collar up to his chin, a placket down the front and a wide sleeve pushed back to bare the forearm. The bust sits on a tapered post on a round plinth with a raised rim and pointed buttress blocks.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 4 pieces:\u003c\/strong\u003e the torso with the tall collar, the raised hand with forearm, the blindfolded head and the spiked hair crown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the post and round plinth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 147 mm (5.79 in) tall, 103 mm (4.06 in) wide and 90 mm (3.54 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe hair crown is dozens of thin flame-shaped spikes that sit on top of the blindfold band. Handle it by the base of the crown and fit it last.\u003c\/li\u003e\n\u003cli\u003eThe raised hand joins at the sleeve; the two crossed fingers are thin and stand clear of the head. Pin the wrist.\u003c\/li\u003e\n\u003cli\u003eThe jacket and collar are covered in a woven texture and the blindfold in a fine mesh, so seams there won't sand smooth without losing texture. Fill carefully and keep sanding to the seam.\u003c\/li\u003e\n\u003cli\u003eThe torso sits on a narrow post over the plinth. Glue and let it set before adding the head and hand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Full kit, 5 pieces","offer_id":67610494468325,"sku":"TNK-A-0067","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-blindfolded-white-haired-sorcerer-bust-resin-kit-01.jpg?v=1791091224"},{"product_id":"anime-bowl-cut-martial-artist-bust-bandaged-raised-hand-resin-garage-kit","title":"Anime Bowl-Cut Martial Artist Bust Resin Garage Kit – Bandaged Raised Hand, Fist Behind Back \u0026 Mesh Jumpsuit (Unpainted, 6 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 6 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the hard-working, weapon-free martial artist from a classic ninja anime, in his fighting stance. Cut off at the waist on a round plinth with wedge-shaped tabs, he holds his bandaged right hand up in front of his face, open with the fingers together, while his left fist is tucked against the small of his back. His head tips forward with a confident half-smile under a glossy bowl haircut with blunt bangs, thick angled eyebrows and big round eyes, and a few loose strands flick out from one temple. He wears a turtleneck jumpsuit sculpted in a fine mesh texture, both forearms wrapped in layered bandages from elbow to knuckles, and a cloth belt with a metal plate carrying a raised spiral leaf emblem. The studio's renders show the sculpt unpainted in gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 5 pieces:\u003c\/strong\u003e the head, the bowl-cut hair, the torso with the belt, the raised right forearm and open hand, and the left forearm and fist.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 145 mm (5.71 in) tall, 92 mm (3.62 in) wide and 174 mm (6.85 in) deep (from Tanuki Figures' notes for this kit).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe raised right hand reaches well out in front of the torso. Pin it at the elbow join.\u003c\/li\u003e\n\u003cli\u003eThe face and the hair are separate pieces, so you can paint the black hair and the face apart and glue the hair on after.\u003c\/li\u003e\n\u003cli\u003eThe flicked hair strands at the temple and the open fingers are the thin parts.\u003c\/li\u003e\n\u003cli\u003eThe mesh texture on the jumpsuit is sculpted all over; a thin wash brings it out without filling it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 6 pieces","offer_id":67610494796005,"sku":"TNK-A-0070","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-bowl-cut-martial-artist-bust-resin-kit-01.jpg?v=1791091295"},{"product_id":"video-game-blonde-demon-hunter-bust-raised-pistol-laced-corset-resin-garage-kit","title":"Video Game Blonde Demon Hunter Bust Resin Garage Kit – Raised Engraved Pistol, Laced Corset \u0026 Long Hair (Unpainted, 2 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the studio's photos of its own unpainted test prints of this sculpt, not of the kit you'll receive. Your kit arrives as 2 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the blonde demon-hunting gunslinger from a famous action video game series. She faces straight ahead with a level, unsmiling stare, her left arm raised over her head and holding a long engraved pistol flat above her, the barrel pointing out past one side. Her hair is combed straight back from the forehead in deep grooves, with a few locks over the shoulders and a long sheet of tapered strands falling down her back to just above the base. She wears a strapless leather corset laced down the front with embossed scrollwork on the side panels, a choker with a small lightning-bolt charm, and a long leather sleeve with three buckled straps on the raised arm. The other arm ends in a flat cut at the shoulder. The bust sits on a faceted column above a round stepped plinth with wedge buttresses. The photos are the studio's own unpainted gray test print.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 1 piece:\u003c\/strong\u003e the whole bust in a single piece, with the head, the long hair, the raised arm and the pistol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round stepped plinth with its faceted column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTallest single piece:\u003c\/strong\u003e the bust, 172.5 mm (6.79 in) in the sculptor's file. It stands taller once it sits on the base's column. The studio's published size doesn't match its files, so I don't list an assembled height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound base:\u003c\/strong\u003e 83.9 × 83.9 mm (3.30 × 3.30 in) across in the sculptor's file.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe bust is a single heavy piece with the pistol held out on the raised arm. Pin it onto the base's column.\u003c\/li\u003e\n\u003cli\u003eThe hair hangs close to the base rim. Dry-fit before gluing so the tips clear it.\u003c\/li\u003e\n\u003cli\u003eThe pistol's trigger, hammer and levers, the strap tails on the sleeve and the hair tips are thin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 2 pieces","offer_id":67610495647973,"sku":"TNK-A-0095","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-blonde-demon-hunter-bust-raised-pistol-laced-corset-resin-kit-01.jpg?v=1791091368"},{"product_id":"video-game-laurel-swordsman-bust-hound-skull-pauldron-resin-garage-kit","title":"Video Game Laurel-Crowned Swordsman Bust Resin Garage Kit – Sword Over the Shoulder \u0026 Three-Headed Hound Pauldron (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the laurel-crowned prince of the underworld from a popular action role-playing game. He stands square to the viewer with his head turned a little, a half smile at one corner of his mouth. His right hand holds his sword by the grip down at his side, so the broad blade, engraved with a row of glyphs, runs up behind his shoulders and out past the other side. The guard is a small skull with flame-like flourishes and the pommel is a faceted cone. His spiky hair sweeps up and back under a laurel wreath. His chest, shoulders and right arm are bare, with a wide chevron-edged band running from one shoulder across his chest, a woven, chain-textured wrap around the lower torso, a band on the upper arm and a strapped bracer on the forearm. On his left shoulder sits a pauldron of three stylized hound heads on a spiked collar. The bust stands on a short post over a round plinth with angular fins. The renders are unpainted gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e the bare torso, the head with the laurel wreath, a short right-arm section, the right forearm and hand with the sword, the chevron band and woven wrap, and the three-headed hound pauldron.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 143 mm (5.63 in) tall, 149 mm (5.87 in) wide and 128 mm (5.04 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe sword is part of the right hand piece and runs across the back of the shoulders. It's the largest part in the kit; pin it at the wrist.\u003c\/li\u003e\n\u003cli\u003eThe pauldron is heavy for its size and sits on one shoulder. Pin it.\u003c\/li\u003e\n\u003cli\u003eThe blade edge and tip, the hair spikes and the flourishes on the guard are thin. Clip their supports slowly.\u003c\/li\u003e\n\u003cli\u003eThe glyphs on the blade are engraved, so a wash picks them out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 7 pieces","offer_id":67610497155301,"sku":"TNK-A-0097","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-laurel-swordsman-bust-hound-skull-pauldron-resin-kit-01.jpg?v=1791091443"},{"product_id":"video-game-martial-artist-bust-raised-gloved-guard-long-hair-resin-garage-kit","title":"Video Game Martial Artist Bust Resin Garage Kit – Raised Gloved Guard, Suspenders \u0026 Very Long Hair (Unpainted, 9 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 9 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the dark-haired martial artist from a classic role-playing game, in her modern look. She is cut just below the waist and set on a faceted post above a round stepped plinth. Both hands are raised to one side in a loose guard with the fingers spread, and she turns her face toward them with a small, calm smile. Long bangs sweep across her forehead, and her very long straight hair falls down her back, swings out past the plinth in a long curve and is bound near the end with a wrapped tie. She wears a cropped tank top with a scoop neck, a ribbed band and a stitched strap under the hem, suspender straps with metal buckles and punched tails, fingerless gloves with riveted plates and knuckle studs, a long riveted guard on one forearm ending in an elbow cap with dome studs, chain bracelets, a stepped wrist cuff and a long drop earring. The studio's renders are unpainted gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e9 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 8 pieces:\u003c\/strong\u003e the head with the long hair, two small hair locks, the torso, two forearms and two gloved hands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round stepped plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 134 mm (5.28 in) tall, 103 mm (4.06 in) wide and 103 mm (4.06 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe long hair is part of the head and is the biggest piece in the kit. It swings out past the plinth, so dry-fit the bust on the post before gluing.\u003c\/li\u003e\n\u003cli\u003eBoth forearms and hands meet in front of her. Fit the forearms first, then the hands, and pin the forearm joins.\u003c\/li\u003e\n\u003cli\u003eThe two small hair locks, the spread fingers and the earring are thin and fragile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 9 pieces","offer_id":67610497253605,"sku":"TNK-A-0099","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-martial-artist-bust-raised-gloved-guard-long-hair-resin-kit-01.jpg?v=1791091445"},{"product_id":"anime-closed-eye-swordsman-bust-sheathed-sword-lightning-bolts-resin-garage-kit","title":"Anime Closed-Eye Swordsman Bust Resin Garage Kit – Sheathed Sword, Flared Triangle-Pattern Coat \u0026 Lightning Bolts (Unpainted, 11 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 11 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the lightning-fast young swordsman from a hit demon-hunting anime. His head is tipped forward and his eyes are closed. He holds his sword sheathed across his body, one fist on the wrapped hilt above a round guard and the other around the scabbard low down, its tip running past the edge of the base. His shaggy hair is built from blunt-cut strands stacked in layers, with a long fringe over his brow. Over a high-collared uniform jacket in a basket-weave texture, with round buttons, a small chest tab and a buckled belt, he wears an open, hip-length coat in a pebbled knit covered in raised triangles, its wide sleeves flaring out to the sides as if caught in a gust. Three zigzag lightning bolts run around him: one behind his shoulder, one across his sleeve and a long one wrapping around his back. The bust stands on a short post over a round plinth with angular buttress blocks. The renders are unpainted gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e11 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 7 pieces:\u003c\/strong\u003e head and hair, the uniform torso, the coat body, two arms in their sleeves, the right fist with the hilt and the left fist with the scabbard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightning, 3 pieces:\u003c\/strong\u003e three zigzag bolts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 157 mm (6.18 in) tall, 178 mm (7.01 in) wide and 104 mm (4.09 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe coat sleeves flare far out to the sides and are thin at the hems. Pin the arms at the shoulders.\u003c\/li\u003e\n\u003cli\u003eThe sword is carried by the two hand pieces. Dry-fit both fists together so the hilt and the scabbard line up before gluing.\u003c\/li\u003e\n\u003cli\u003eThe three lightning bolts are separate and thin. Glaze them for a glow, and fit them last.\u003c\/li\u003e\n\u003cli\u003eThe hair is built from many flat, blunt strands with thin ends. Clip their supports slowly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 11 pieces","offer_id":67610498466021,"sku":"TNK-A-0080","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-closed-eye-swordsman-bust-sheathed-sword-lightning-bolts-resin-kit-01.jpg?v=1791091527"},{"product_id":"anime-horned-oni-warrior-bust-long-streaming-hair-resin-garage-kit","title":"Anime Horned Warrior Bust Resin Garage Kit – Curved Horns, Long Wind-Swept Hair \u0026 Round Plinth (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the horned oni warrior from a famous anime pirate series. The bust is cut at mid-torso and faces front with the chin down a little, under two crescent-shaped horns scored with shallow rings. The expression is a hard scowl over a small, confident smile. Very long hair is drawn up into a high knot at the crown, pierced by hair rods, and streams out almost level to one side as if caught in a strong wind, with a few strands ending in flat hair ties. Straight bangs cover the forehead, a long lock frames each side of the face, and a thick hoop earring hangs in each ear. The top is a sleeveless, kimono-style garment with a crossed front, a wide flat collar band and a fine woven texture, with two small square crests on the upper front and a raised swirl motif on each side below them. The bust sits on a tapered post over a round plinth with angular buttress blocks. The renders are unpainted gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e the head, the torso in the kimono-style top, the main hair sweep with the knot, the front hair locks and two horns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 143 mm (5.63 in) tall, 137 mm (5.39 in) wide and 153 mm (6.02 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe main hair sweep is the largest and heaviest piece, and it reaches far out to one side of the bust. Pin it to the head and support the bust while the glue sets.\u003c\/li\u003e\n\u003cli\u003eThe horns, the front locks and the ends of the hair strands are thin. Clip their supports slowly.\u003c\/li\u003e\n\u003cli\u003eThe two horns seat on either side of the hair knot. Dry-fit them with the hair before gluing.\u003c\/li\u003e\n\u003cli\u003eThe woven texture on the top takes a wash well, and the crests and swirls are raised, so a fine brush picks them out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 7 pieces","offer_id":67610507641061,"sku":"TNK-A-0083","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-horned-oni-warrior-bust-long-streaming-hair-resin-kit-01.jpg?v=1791091597"},{"product_id":"anime-pale-snake-sorcerer-bust-kunai-tongue-rope-belt-resin-garage-kit","title":"Anime Snake Sorcerer Bust Resin Garage Kit – Long Tongue, Kunai Fist \u0026 Twisted Rope Belt (Unpainted, 11 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 11 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the pale, snake-like rogue ninja from a classic ninja anime. Cut off at the waist on a round finned plinth, he leans forward over his raised left fist, which holds a kunai point-down under his chin, and his long tongue runs out of a wide grin and loops around the blade. His head is bowed, with narrowed eyes and deep lines down his cheeks, and his long straight hair is parted in the middle, falling past his face to the chest in front and down to the waist at the back. He wears a loose short-sleeved shirt with a broad rolled collar and a sculpted basket-weave texture over a fitted long sleeve with a twill texture. A thick twisted rope belt wraps his waist, is tied off behind one hip, and swings out in a large loop with frayed ends. The right arm stops at the shoulder in a flat bust cut. The studio's renders show the sculpt unpainted in gray.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e11 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 10 pieces:\u003c\/strong\u003e the head, two hair sections, the torso, the left forearm, the left fist, a shirt section, two sections of the rope belt and the kunai.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round finned plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio scale:\u003c\/strong\u003e 1:6 (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTallest single piece:\u003c\/strong\u003e the main hair section, 81.3 mm (3.20 in) in the sculptor's file. I don't list an assembled size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound base:\u003c\/strong\u003e 76.3 × 76.5 mm (3.00 × 3.01 in) across in the sculptor's file. The rope loop and the raised elbow stand out past the base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe rope belt comes in two sections that wrap the waist and swing out in a large loop. Dry-fit both sections against the torso before gluing, and pin the loop.\u003c\/li\u003e\n\u003cli\u003eThe kunai, the tongue that wraps it and the fist that holds it meet in a small, busy spot under the chin. Fit the hand and kunai before the hair goes on.\u003c\/li\u003e\n\u003cli\u003eThe hair is in two sections with fine tapered tips that fall across the face and the blade.\u003c\/li\u003e\n\u003cli\u003eThe shirt's weave, the sleeve's twill and the rope strands are sculpted in; a thin wash brings them out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 11 pieces","offer_id":67610507706597,"sku":"TNK-A-0084","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-pale-snake-sorcerer-bust-kunai-rope-resin-kit-01.jpg?v=1791091598"},{"product_id":"anime-pink-haired-brawler-bust-blue-flame-fist-hood-resin-garage-kit","title":"Anime Pink-Haired Brawler Bust Resin Garage Kit – Flame-Wrapped Fist, Raised Open Hand \u0026 Hooded School Jacket (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the studio's photos of its own unpainted test prints of this sculpt, not of the kit you'll receive. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the pink-haired young fighter from a popular dark-fantasy anime. He lunges forward off the post, head down and leading, teeth gritted in a scowl. His right fist is thrust low in front of him, wrapped in a burst of flames with forked tongues, and his left arm reaches high overhead with the hand open and the fingers spread. His hair is cut in layered, petal-like spikes over short cropped sides. He wears a high-collared school uniform jacket in a fine woven texture, with wide sleeves, a single button and a thick knit hood bunched around his neck. The bust stands on a short post over a round black plinth with angular buttress blocks.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e the torso in the uniform jacket, the head, two arms, the open left hand and the flame-wrapped right fist.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 126 mm (4.96 in) tall, 99 mm (3.90 in) wide and 147 mm (5.79 in) deep (from Tanuki Figures' notes file).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe bust leans far forward off a single post, with the raised arm reaching out ahead. Pin the torso to the post and the raised arm at the shoulder.\u003c\/li\u003e\n\u003cli\u003eThe flame tongues around the fist and the spread fingers of the open hand are the thinnest parts. Clip their supports slowly.\u003c\/li\u003e\n\u003cli\u003ePaint the fist inside the flames in skin tones, then glaze the flames for a glow.\u003c\/li\u003e\n\u003cli\u003eThe hair spikes taper to fine points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Bust, 7 pieces","offer_id":67610508591333,"sku":"TNK-A-0086","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-pink-haired-brawler-bust-blue-flame-fist-hood-resin-kit-01.jpg?v=1791091669"},{"product_id":"anime-round-glasses-swordswoman-bust-shouldered-cleaver-blade-resin-garage-kit","title":"Anime Round-Glasses Swordswoman Bust Resin Garage Kit – Heavy Cleaver Blade Over the Shoulder \u0026 Round Plinth, Glasses and No-Glasses Heads Included (Unpainted, 10 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 10 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the green-haired swordswoman in round glasses from a popular supernatural-action anime. The bust is cut at mid-torso, with her head tipped down and turned a little, and her right arm raised and bent so the fist holds a heavy, cleaver-like single-edged blade across her shoulder. The blade runs behind her head and out past the other side, which makes the piece wider than it is tall. Its flat is scored with nicks and scratches, a band of rippled texture runs along it, the grip is wrapped and ends in a rounded cap, and a spray of long, pointed fronds bursts out above her fist. She has short choppy hair, round glasses with open rings, a cloth bandage across her brow, and raised scars sculpted on her right arm, her neck and one cheek. She wears a sleeveless high-neck top with a ribbed knit texture. The bust sits on a tapered post on a round plinth with pointed buttress blocks around the rim. Both heads are in the box, each with its own hair: one with the round glasses and bandage, as in the photos, and one without glasses and with one eye scarred shut. Swap them as you like. The studio's renders are unpainted gray, so the colors are yours to choose. Two pairs of the round glasses are included, one with a filled-in lens and one with open rims.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 resin pieces in total. Both heads are in the box; swap them as you like.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 4 pieces:\u003c\/strong\u003e the bust in the sleeveless high-neck top, the raised right arm, the cleaver blade, and the round plinth with its post.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlasses head, 4 pieces:\u003c\/strong\u003e the head with the brow bandage, the hair and two pairs of round glasses (one with a filled-in lens, one with open rims).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-glasses head, 2 pieces:\u003c\/strong\u003e the head with one eye scarred shut, and its hair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio size:\u003c\/strong\u003e 1:6 scale, 107 mm (4.21 in) tall, 142 mm (5.59 in) wide and 111 mm (4.37 in) deep (from Tanuki Figures' printing and scale guide).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale: 1:6 (from the studio).\u003c\/strong\u003e Scale isn't standardized, so figures of the same scale from different creators may not match exactly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe blade is the largest part and hangs off the fist and the shoulder, passing close behind the head. Dry-fit it with the head, hair and arm in place before gluing, and pin it at the fist.\u003c\/li\u003e\n\u003cli\u003eThe round glasses are a wire-thin frame with only small contact points on the face. Paint them before fitting and cut the supports off with flush cutters.\u003c\/li\u003e\n\u003cli\u003eThin parts: the glasses, the hair strand tips, the pointed fronds at the grip, and the edge and tip of the blade.\u003c\/li\u003e\n\u003cli\u003eBoth heads are in the box, each with its own hair. Pin the head without glue if you want to swap them.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eTanuki Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/TanukiFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/TanukiFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/tanukifigures.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tanuki Figures","offers":[{"title":"Full kit with both heads (glasses and no-glasses), 10 pieces","offer_id":67611280670949,"sku":"TNK-A-0120","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-round-glasses-swordswoman-bust-shouldered-cleaver-blade-resin-kit-01.jpg?v=1791147641"},{"product_id":"anime-blonde-officer-twin-pistols-raised-bust-resin-garage-kit","title":"Anime Blonde Officer Bust Resin Garage Kit – Twin Pistols Raised, Military Jacket \u0026 Pillar Stand (Unpainted, 10 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 10 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the sharpshooting blonde lieutenant from a classic alchemy-and-military anime, shown from the chest up with both arms raised and a pistol held up in each hand beside her face. Her hair is gathered up at the back with a clip and fans out in spikes, with a side-swept fringe across one eye and a calm, slight smile. She wears her military jacket with a stand collar and a front flap, with a braided cord looped from one shoulder. The bust stands on a square pillar with a stepped foot. The full 1:10 scale diorama and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 8 pieces:\u003c\/strong\u003e face, fringe, back hair, torso with the shoulder cord, two sleeves, and two hands each holding a pistol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 76 mm (2.99 in) tall (from the studio's scale sheet, which gives the bust's height only).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe two hands with pistols join at the cuffs and should frame the face evenly. Fit both sleeves and hands together before the glue sets.\u003c\/li\u003e\n\u003cli\u003eThe braided cord is thin and loops away from the torso. Handle it gently when removing supports.\u003c\/li\u003e\n\u003cli\u003eThin parts at this size: the pistol barrels, the fringe spikes and the cord.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 10 pieces","offer_id":67722264838373,"sku":"NNF-A-0063","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-blonde-officer-twin-pistols-raised-bust-resin-kit-01.jpg?v=1792160063"},{"product_id":"anime-flame-haired-swordsman-sword-draw-bust-resin-garage-kit","title":"Anime Flame-Haired Swordsman Bust Resin Garage Kit – Sword Draw, Spiked Mane \u0026 Cracked-Stone Pedestal (Unpainted, 7 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the cheerful, flame-haired swordsman from a hugely popular demon-hunting anime, cut at the ribs. It keeps his head with the mane of long spikes flaring wider than his shoulders and a wide grin, his uniform jacket with its stand collar, round buttons and small chest patch, and both arms in the drawing pose: one hand raised across his chest on the hilt and the other low at the guard, with a small flame curling off the blade. The bust stands on a round cracked-stone pedestal. The full figure is sold as a separate listing.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e head, a bust torso cut at the ribs, two arms and two hands with the sword.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePedestal, 1 piece:\u003c\/strong\u003e the round cracked-stone pedestal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e the sculptor doesn't publish a size. Its tallest single piece is the bust torso, 78.3 mm (3.08 in), and its pedestal is 76.4 × 76.2 mm (3.01 × 3.00 in) across, in the sculptor's files.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoth hands hold the sword across the body mid-draw. Dry-fit the arms and both hands together before gluing any of them.\u003c\/li\u003e\n\u003cli\u003eThe spiked hair flares wider than the shoulders. Pin the head at the neck.\u003c\/li\u003e\n\u003cli\u003eThin parts: the hair spikes and the small flame on the blade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eLion Realm Studio\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/LionRealmStudio\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/LionRealmStudio\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/lionrealmstudio.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e · \u003ca href=\"https:\/\/cults3d.com\/en\/users\/lionrealmstudio\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/thiagocalixto3d\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Lion Realm Studio","offers":[{"title":"Bust, 7 pieces","offer_id":67722265428197,"sku":"LRS-A-0014","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-flame-haired-swordsman-sword-draw-bust-resin-kit-01.jpg?v=1792160168"},{"product_id":"anime-blond-suited-fighter-raised-fist-bust-resin-garage-kit","title":"Anime Blond Suited Fighter Bust Resin Garage Kit – Raised Fist, Open Pinstripe Jacket \u0026 Stepped Stand (Unpainted, 10 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 10 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the blond, suit-wearing fighting chef of a famous anime pirate crew, from the waist up. One arm is thrown straight up with the fist clenched, his head is tipped forward with the blond hair falling over one eye, and his mouth is open in a shout. He wears his pinstripe jacket open and flaring out at both sides, over a buttoned shirt with the collar open and a loose tie blowing back over his shoulder. The bust stands on a small stepped stand. The full 1:10 scale statue and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 8 pieces:\u003c\/strong\u003e head, front hair, back hair, torso with the shirt and tie, two arms, and the two sides of the jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 133 mm (5.24 in) tall (from the studio's scale sheet).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe jacket comes as two separate sides that wrap around the torso. Dry-fit both before gluing so the lapels sit right against the shirt.\u003c\/li\u003e\n\u003cli\u003eThe raised arm reaches well above the head. Pin it at the shoulder.\u003c\/li\u003e\n\u003cli\u003eThin parts: the tie ends, the jacket hems and the front hair.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 10 pieces","offer_id":67722265460965,"sku":"NNF-A-0060","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-blond-suited-fighter-raised-fist-bust-resin-kit-01.jpg?v=1792160179"},{"product_id":"anime-blonde-armored-swordswoman-dragon-head-crescent-slash-bust-resin-garage-kit","title":"Anime Blonde Armored Swordswoman Bust Resin Garage Kit – Wind-Blown Bob, Engraved Shoulder Plate \u0026 Square Plinth (Unpainted, 4 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 4 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the blonde knight-swordswoman from a hit Korean action fantasy series about monster-hunting guilds. It shows her head and shoulders: a short bob blown sideways across her face, a cool, level stare, the stiff collar of her jacket and a silver shoulder plate with scroll engraving and a fringe hanging beneath it. The bust stands on a post over a stepped square plinth. The full 1:10 scale statue and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 3 pieces:\u003c\/strong\u003e head, fringe, and the shoulders with the jacket collar and shoulder plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinth, 1 piece:\u003c\/strong\u003e a square stepped plinth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 62 mm (2.44 in) tall (from the studio's scale sheet).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe fringe is a separate thin piece over the forehead. Dry-fit it before gluing so the hair lines up.\u003c\/li\u003e\n\u003cli\u003eThe hair tips and the shoulder fringe are thin.\u003c\/li\u003e\n\u003cli\u003eThe bust is small, so the face and eyes are fine detail work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 4 pieces","offer_id":67722265723109,"sku":"NNF-A-0003","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-blonde-armored-swordswoman-dragon-head-crescent-slash-bust-resin-kit-01.jpg?v=1792160222"},{"product_id":"anime-hoodie-dagger-hunter-bust-resin-garage-kit","title":"Anime Hoodie Hunter Bust Resin Garage Kit – Hooked Dagger, Reaching Hand \u0026 Stepped Plinth (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the young hunter from a hugely popular hunter-and-dungeon anime, from the chest up. He holds a short hooked dagger drawn back over one shoulder and reaches forward with the other hand, fingers spread, his eyes narrowed under a sweeping fringe. He wears a hoodie with the hood down, white drawstrings and the sleeves pushed up, its hem cut off in a ragged edge where the bust ends. The bust stands on a stepped plinth. The full 1:10 scale diorama, the miniature and the knight bust are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e head, front hair, chest with the hoodie, two arms and the dagger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe reaching arm sticks straight out from the chest with nothing under it. Pin it at the shoulder.\u003c\/li\u003e\n\u003cli\u003eThe dagger fits into the raised hand. Dry-fit it before gluing so the blade sits over the shoulder as in the photo.\u003c\/li\u003e\n\u003cli\u003eThin parts: the dagger's hooked tip, the drawstrings, the spread fingers and the front hair.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Hunter bust, 8 pieces","offer_id":67722265919717,"sku":"NNF-A-0070","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-hoodie-dagger-hunter-bust-resin-kit-01.jpg?v=1792160234"},{"product_id":"anime-crimson-armored-knight-bust-resin-garage-kit","title":"Anime Crimson Armored Knight Bust Resin Garage Kit – Spiked Pauldrons, Flowing Plume \u0026 Torn Cape (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the summoned knight in crimson plate armor from a hugely popular hunter-and-dungeon anime. His helmet has a narrow visor, a spiked crest and a long plume that streams back from the top, and he wears spiked pauldrons over a breastplate with a ragged ruff at the neck and a star-shaped clasp, with a torn cape hanging off one shoulder. The bust stands on a stepped plinth. In the studio's painted design the armor is deep crimson with silver-white edging. The full 1:10 scale diorama, the miniature and the hunter bust are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e helmet, plume, chest with the ruff, two pauldrons and a cape section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe two pauldrons and the cape fit onto the chest piece. Dry-fit all three together before gluing so the cape sits behind the shoulder.\u003c\/li\u003e\n\u003cli\u003eThe plume reaches back past the plinth with nothing under it. Pin it into the helmet.\u003c\/li\u003e\n\u003cli\u003eThin parts: the spikes on the pauldrons and crest, the plume strands and the cape's torn edge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Knight bust, 8 pieces","offer_id":67722266542309,"sku":"NNF-A-0071","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-crimson-armored-knight-bust-resin-kit-01.jpg?v=1792160263"},{"product_id":"anime-giant-monk-hand-axe-prayer-beads-bust-resin-garage-kit","title":"Anime Warrior Monk Bust Resin Garage Kit – Raised Hand Axe, Prayer Beads \u0026 Stepped Plinth (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the towering, blind warrior monk from a hugely popular demon-hunting anime. It shows him from the belt up: one arm raised overhead gripping a short-hafted hand axe with an engraved blade, the other thrust forward with the fingers spread and two loops of prayer beads hanging from the hand. His spiky hair is swept back, his eyes are blank and his teeth are bared, and he wears his textured uniform jacket with the belt at the cut line. The bust stands on a square stepped plinth. This listing is the bust only, 111 mm tall on the studio's scale sheet; the 1:10 scale statue with the flail, haori and thorn base and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure, 6 pieces:\u003c\/strong\u003e head, chest and shoulders, two arms (one holding the axe) and two prayer-bead loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 111 mm (4.37 in) tall (from the studio's scale sheet, which gives no width or length for the bust).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe axe arm reaches up and out from the shoulder with the axe head at the end. Pin that join.\u003c\/li\u003e\n\u003cli\u003eThe two prayer-bead loops are thin. Glue them to the open hand last.\u003c\/li\u003e\n\u003cli\u003eThe kit includes two plinths, a smaller and a larger one; use either. Glue the bust on straight so it doesn't lean.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 8 pieces","offer_id":67722267230437,"sku":"NNF-A-0016","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-giant-monk-hand-axe-prayer-beads-bust-resin-kit-01.jpg?v=1792160357"},{"product_id":"anime-scarred-swordsman-serrated-sword-bust-resin-garage-kit","title":"Anime Scarred Swordsman Bust Resin Garage Kit – Serrated Sword, Spread Hand \u0026 Woven Coat (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the scarred, white-haired demon-hunting swordsman from a hit sword-fighting anime, from the chest up. He grins with wide eyes under a heavy fringe of spiky hair, raised scars across his face and forearm. His right hand holds the long sword with its saw-toothed edge, star-shaped guard and wrapped hilt raised up beside him, and his left hand is spread wide behind his head. He wears the woven coat over his open uniform jacket, with the large character on the back. The bust stands on a stepped stand. The full 1:10 scale statue and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e head, front hair, back hair, the shoulders with the coat, the raised left arm and the right arm with the sword.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 110 mm (4.33 in) tall (from the studio's scale sheet).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe sword arm holds a long, thin blade well out from the body. Pin it at the shoulder.\u003c\/li\u003e\n\u003cli\u003eThe front and back hair pieces frame the head; dry-fit both before gluing.\u003c\/li\u003e\n\u003cli\u003eThin parts: the blade's serrated edge, the spread fingers and the hair spikes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 8 pieces","offer_id":67722267263205,"sku":"NNF-A-0078","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-scarred-swordsman-serrated-sword-bust-resin-kit-01.jpg?v=1792160364"},{"product_id":"anime-gold-armored-sun-knight-pointing-up-bust-resin-garage-kit","title":"Anime Gold-Armored Sun Knight Bust Resin Garage Kit – Pointing Pose, Plated Collar \u0026 Cracked-Stone Base (Unpainted, 9 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 9 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the mustached knight whose strength peaks at noon, from a popular medieval-fantasy anime, from the waist up. His right arm is raised straight up with one finger pointing at the sky, and his head is tilted up with the chin out. He has swept-back hair and a short curled mustache. His plate armor is sculpted with scratches and dents: a high collar of radiating plates, fan-shaped chest plates and stacked plates at the waist, with chainmail sleeves and big dished shoulder guards. His lowered left arm ends at the forearm guard. The bust sits on a round cracked-stone base. The full figure is sold as a separate listing.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e9 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 8 pieces:\u003c\/strong\u003e head, the bust torso, two arms, the pointing hand, the end of the lowered forearm and two shoulder guards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round cracked-stone bust base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e the studio publishes no size for it. Its tallest single piece is the bust torso, 132.5 mm (5.22 in), and the round bust base is 121.8 × 121.4 mm (4.80 × 4.78 in) across in the sculptor's files.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe raised arm and pointing hand stand well above the head. Pin the arm into the shoulder under the guard and the hand onto the forearm.\u003c\/li\u003e\n\u003cli\u003eThe two big shoulder guards sit over the arms. Dry-fit them with the arms in place before gluing.\u003c\/li\u003e\n\u003cli\u003eThin parts: the pointing finger, the mustache and the edges of the collar plates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eLion Realm Studio\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/LionRealmStudio\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/LionRealmStudio\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/lionrealmstudio.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e · \u003ca href=\"https:\/\/cults3d.com\/en\/users\/lionrealmstudio\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/thiagocalixto3d\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Lion Realm Studio","offers":[{"title":"Bust, 9 pieces","offer_id":67722267295973,"sku":"LRS-A-0025","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-gold-armored-sun-knight-pointing-up-bust-resin-kit-01.jpg?v=1792160366"},{"product_id":"anime-flaming-black-bear-warrior-bust-resin-garage-kit","title":"Anime Flaming Black Bear Warrior Bust Resin Garage Kit – Snarling Tusked Head, Flame Crest \u0026 Cracked-Stone Pedestal (Unpainted, 5 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 5 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the giant bear warrior summoned from the shadows in a hit Korean fantasy series. It takes his head, the flame crest, the shoulders and the chest, with the arms ending above the elbow, and narrows to a point on a round cracked-stone pedestal. His head is pushed forward between heavy shoulders in a snarl, with two long tusks rising from the lower jaw and scar marks through one brow, and his fur is sculpted as layered pointed tufts. Flames rise from his brow in a crest, curl over both shoulders and run across the chest in a jagged X in raised relief. The studio shows the bust only as an unpainted gray render. This listing is the bust, 5 pieces. The full figure on its rock plinth is sold as a separate listing.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 4 pieces:\u003c\/strong\u003e the chest with the head and crest, the lower chest, and both upper arms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round cracked-stone pedestal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust pedestal:\u003c\/strong\u003e 161.6 × 162.2 mm (6.36 × 6.39 in) across in the sculptor's file. The sculptor doesn't publish the bust's height, so I don't list one.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThis is a big, heavy bust. The chest with the head is a very large part.\u003c\/li\u003e\n\u003cli\u003eI print the chest, the lower chest and the pedestal hollow, so fill the small drain holes before priming.\u003c\/li\u003e\n\u003cli\u003eThe join between the chest and the lower chest runs straight across the bottom of the flame X. Plan to fill it and carry the fur and flame detail across the seam.\u003c\/li\u003e\n\u003cli\u003eThin parts: the flame tips on the crest and shoulders, the tusks and the scars.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eLion Realm Studio\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/LionRealmStudio\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/LionRealmStudio\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/lionrealmstudio.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e · \u003ca href=\"https:\/\/cults3d.com\/en\/users\/lionrealmstudio\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/thiagocalixto3d\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Lion Realm Studio","offers":[{"title":"Bust, 5 pieces","offer_id":67722267361509,"sku":"LRS-A-0016","price":97.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-flaming-black-bear-warrior-bust-resin-kit-01.jpg?v=1792160376"},{"product_id":"anime-masked-soldier-shoulder-rifle-bust-resin-garage-kit","title":"Anime Masked Soldier Bust Resin Garage Kit – Giant Shoulder Rifle, Masked and Bare-Face Heads \u0026 Round Plinth (Unpainted, 14 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 14 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the pink-haired captain of a monster-fighting military unit from a hit sci-fi action anime, from the hips up. He props the same full-length angular rifle as the full figure on his right shoulder, gripped in one hand, with his other arm hanging at his side. He wears the bodysuit zipped to a high collar with molded chest plates, rounded shoulder guards and a belt with a holstered sidearm and a flap pouch. Both heads are in the box: one in a respirator mask with round filter canisters, as in the photo, and one with the face bare (not pictured on the bust). The bust stands on a round cracked plinth. The full figure is sold as a separate listing.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 9 pieces:\u003c\/strong\u003e the bust torso, the hip section with the belt, two heads (masked and bare face), the hair, two forearms, the belt pouch and the holstered sidearm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRifle, 4 pieces:\u003c\/strong\u003e the full-length rifle in four sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round bust plinth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e the studio publishes no size for it. The round bust base is 78.4 × 78.6 mm (3.09 × 3.09 in) across in the sculptor's file, and the bust carries the same full-length rifle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoth heads are in the box. Dry-fit the hair on each and pin the head without glue if you want to swap them.\u003c\/li\u003e\n\u003cli\u003eThe rifle comes in four sections and is much longer than the bust is tall. Pin the sections together, then pin the rifle at the gripping hand and the shoulder.\u003c\/li\u003e\n\u003cli\u003eThe flat blade faces carry crisp sculpted markings. Keep sanding and filler off the lettering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eLion Realm Studio\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/LionRealmStudio\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/LionRealmStudio\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/lionrealmstudio.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e · \u003ca href=\"https:\/\/cults3d.com\/en\/users\/lionrealmstudio\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/thiagocalixto3d\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Lion Realm Studio","offers":[{"title":"Bust with both heads (masked and bare face), 14 pieces","offer_id":67722580721893,"sku":"LRS-A-0031","price":97.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-masked-soldier-shoulder-rifle-bust-resin-kit-01.jpg?v=1792160438"},{"product_id":"anime-three-sword-swordsman-purple-flame-bust-resin-garage-kit","title":"Anime Three-Sword Swordsman Bust Resin Garage Kit – Purple Flame Blades, Sword in His Teeth \u0026 Oval Pedestal (Unpainted, 14 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 14 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the green-haired swordsman who fights with three swords, from a famous anime pirate series. It is the statue from the hips up on an oval pedestal: a sword in each hand held low and angled out to the sides, a third sword clenched crosswise in his teeth, and purple flame running the length of all three blades in thin, pointed tongues. His left eye is shut with a vertical scar through it, a black bandana covers his head and three drop earrings hang from one ear. He is bare-chested and heavily muscled, with a long stitched scar running diagonally across his chest. His dark kimono is pulled down to the waist and folded over the sash, its skirt flaring wide around the pedestal, with a long sleeve hanging and three scabbards tucked through the sash at his hip. The two hand swords are the same parts as on the full statue, so they reach just as far to each side. The studio shows the bust as an unpainted gray render. This listing is the bust, 14 pieces. The full figure on its flame-ring rock base is sold as a separate listing.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e14 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure, 9 pieces:\u003c\/strong\u003e head, bandana, bare torso, two arms, the folded-down kimono top, the kimono skirt and two hanging sleeves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwords, 4 pieces:\u003c\/strong\u003e the three flaming swords and the scabbard set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the oval pedestal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust pedestal:\u003c\/strong\u003e 124.9 × 119.3 mm (4.92 × 4.70 in) across in the sculptor's file. The sculptor doesn't publish an assembled size for the bust, so I don't list one.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\n\n\u003cli\u003eI print the pedestal hollow, so fill the small drain hole before priming.\u003c\/li\u003e\n\u003cli\u003eThe two hand swords and their flames reach far out to each side and hang from the wrists. Pin both hands and both sword grips; the flame tongues and earrings are the thinnest parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eLion Realm Studio\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/LionRealmStudio\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/LionRealmStudio\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/lionrealmstudio.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e · \u003ca href=\"https:\/\/cults3d.com\/en\/users\/lionrealmstudio\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/thiagocalixto3d\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Lion Realm Studio","offers":[{"title":"Bust, 14 pieces","offer_id":67722725294309,"sku":"LRS-A-0049","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-three-sword-swordsman-purple-flame-bust-resin-kit-01.jpg?v=1792160468"},{"product_id":"anime-teal-tipped-hair-young-swordsman-katana-bust-resin-garage-kit","title":"Anime Young Swordsman Bust Resin Garage Kit – Teal-Tipped Flowing Hair, Raised Katana \u0026 Stepped Plinth (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the calm young swordsman with long black hair that fades to turquoise at the tips, from a hugely popular demon-hunting anime. It shows his head with the hair swept back into loose streaming strands, his upper body in the uniform jacket with its standing collar and wide sleeves, and both hands: the right one raised beside his head holding the katana, with its square pierced guard by his face, and the left reaching straight forward with the fingers open. His face is level and calm. The bust stands on a stepped plinth. The full 1:10 scale statue and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e head, bangs, back hair, the chest with both sleeves, and two hands (one holding the katana).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 83 mm (3.27 in) tall (from the studio's scale sheet, which gives no width or length for the bust).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe back hair is one large part with many thin, freestanding strands. Support it well and handle it with care.\u003c\/li\u003e\n\u003cli\u003eThe katana is long and thin and is part of the right hand. Fit it last, after the hair.\u003c\/li\u003e\n\u003cli\u003eThe kit includes two plinths, a smaller and a larger one; use either. Glue the bust on straight so it doesn't lean.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 8 pieces","offer_id":67722767663333,"sku":"NNF-A-0081","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-teal-tipped-hair-young-swordsman-katana-bust-resin-kit-01.jpg?v=1792160491"},{"product_id":"anime-suited-lawyer-glowing-sword-gavel-bust-resin-garage-kit","title":"Anime Suited Lawyer Bust Resin Garage Kit – Pointing Hand, Glowing Sword \u0026 Gavel, Round Stone Pedestal (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the tired-eyed defense lawyer turned fighter from a hit dark-fantasy anime about curses. It takes him from the hips up on a round cracked-stone pedestal: an open suit jacket with a woven texture and a small lapel pin, a shirt open at the collar with no tie and a belt, his left hand in his trouser pocket and his right arm raised across his chest with the index finger pointing. His dark spiky hair is swept up and back and his heavy-lidded eyes look off to the side. Both weapons come in the kit, held in the raised hand: a long glowing sword with a small cross mark at the hilt, slanting up past his shoulder, and a wooden gavel with a cross carved into its head, resting against his cheek. The studio shows the bust as unpainted gray renders, one with each weapon. This listing is the bust, 8 pieces. The full figure with the hooded judge spirit and the courtroom base is sold as a separate listing.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 5 pieces:\u003c\/strong\u003e head, the raised-arm torso, the hip section, the left arm and the pointing right arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeapons, 2 pieces:\u003c\/strong\u003e the glowing sword and the gavel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase, 1 piece:\u003c\/strong\u003e the round cracked-stone pedestal.\u003c\/li\u003e\n\u003cli\u003eThe sculptor doesn't publish the bust's height, so I don't list one. The round pedestal is 75.3 × 75.0 mm (2.96 × 2.95 in) across in the sculptor's file.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eThe pointing finger on the right arm is a thin, freestanding part. Support it carefully and fit it late.\u003c\/li\u003e\n\u003cli\u003eThe glowing sword is long and thin; a glaze and gloss coat give it the glow. Choose the sword or the gavel before gluing the hand.\u003c\/li\u003e\n\u003cli\u003eThin parts: the spiky hair tips, the sword point and the gavel handle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eLion Realm Studio\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/LionRealmStudio\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/LionRealmStudio\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/lionrealmstudio.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e · \u003ca href=\"https:\/\/cults3d.com\/en\/users\/lionrealmstudio\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/thiagocalixto3d\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Lion Realm Studio","offers":[{"title":"Bust, 8 pieces","offer_id":67722769400037,"sku":"LRS-A-0047","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-suited-lawyer-glowing-sword-gavel-bust-resin-kit-01.jpg?v=1792160534"},{"product_id":"cartoon-bearded-old-general-green-robe-bust-resin-garage-kit","title":"Cartoon Bearded Old General Bust Resin Garage Kit – Flared Robe Sleeves, Topknot \u0026 Full Beard on a Plinth (Unpainted, 10 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 10 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the kindly, tea-loving retired general from a much-loved animated fantasy series, cut from the studio's lightning statue. He is bald on top with a gray topknot, long hair streaming back, a full beard and mustache and heavy brows. One huge robe sleeve flares out to the side and the other arm reaches across with the hand open. In the studio's painted design he wears a dark green outer robe edged in cream over a lighter green tunic, with a gray-teal sash and a gold buckle plate. The bust stands on a stepped plinth.\u003c\/p\u003e\u003cp\u003eThis listing is the bust, 92 mm tall on the studio's scale sheet. The full 1:10 statue and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 8 pieces:\u003c\/strong\u003e head, topknot and hair, chest with the sash and buckle, two robe sleeves, two forearms and one hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003eThe small lightning effect at the fingertips in the photo isn't included with the bust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 92 mm (3.62 in) tall (from the studio's scale sheet, which gives no width or length for the bust).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: intermediate\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe two flared robe sleeves are large open cups that hang off the shoulders. Pin them at the shoulder joins.\u003c\/li\u003e\n\u003cli\u003eThe bust ships one hand; the other forearm ends inside its sleeve.\u003c\/li\u003e\n\u003cli\u003eThe kit includes two plinths, a smaller and a larger one; use either. Glue the bust on straight so it doesn't lean.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 10 pieces","offer_id":67722769432805,"sku":"NNF-A-0029","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/cartoon-bearded-old-general-green-robe-bust-resin-kit-01.jpg?v=1792160537"},{"product_id":"anime-white-haired-elf-mage-bust-resin-garage-kit","title":"Anime White-Haired Elf Mage Bust Resin Garage Kit – Twin Tails, High Collar \u0026 Gold-Trimmed Capelet on a Plinth (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the white-haired elf mage from a popular fantasy anime, cut from the studio's two-elf crossover scene. Her long twin tails sweep out to either side, her bangs fall over a calm face, and she wears a high-collared coat under a capelet with a gold edge. In the studio's painted design her hair is pale lilac-white, her eyes are green and she wears red teardrop earrings with a white coat and capelet. The bust stands on a square stepped plinth.\u003c\/p\u003e\u003cp\u003eThis listing is the bust, 79 mm tall on the studio's bust sheet. The full 1:10 scene, the miniature and the blonde elf's bust are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e head, bangs, two twin tails, torso and capelet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 79 mm (3.11 in) tall (from the studio's bust sheet, which gives the height only).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe bangs seat in a square socket on top of the head, and the head sits on a square peg on the capelet. Dry-fit both before gluing.\u003c\/li\u003e\n\u003cli\u003eThe twin tails are thin and trail out to the sides. Fit them last and pin them if the joins feel loose.\u003c\/li\u003e\n\u003cli\u003eGlue the bust onto the plinth's post square so it doesn't lean.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, white-haired elf, 8 pieces","offer_id":67722769596645,"sku":"NNF-A-0022","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-white-haired-elf-mage-bust-resin-kit-01.jpg?v=1792160574"},{"product_id":"anime-blonde-elf-mage-backpack-bust-resin-garage-kit","title":"Anime Blonde Elf Mage Bust Resin Garage Kit – Braided Hair, Backpack \u0026 Rolled Bedroll on a Plinth (Unpainted, 13 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 13 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the blonde elf mage from a popular fantasy anime, cut from the studio's two-elf crossover scene. She looks back over her shoulder, with her long hair in a braided crown and two thin front braids, and her leather backpack with a rolled bedroll on top sits on her back with a strap across her shoulder. In the studio's painted design her hair is blonde, her eyes are green and she wears a red choker and a blue robe with gold cuffs. The bust stands on a square stepped plinth.\u003c\/p\u003e\u003cp\u003eThis listing is the bust, 82.5 mm tall on the studio's bust sheet. The full 1:10 scene, the miniature and the white-haired elf's bust are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e13 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 11 pieces:\u003c\/strong\u003e head, bangs, back hair, two front braids, torso, two arm pieces, a thin band, the backpack with bedroll and a strap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 82.5 mm (3.25 in) tall (from the studio's bust sheet, which gives the height only).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe backpack with bedroll is a large part on her back. Pin it to the torso.\u003c\/li\u003e\n\u003cli\u003eThe front braids, the band and the strap are small, thin parts. Fit them last with tweezers.\u003c\/li\u003e\n\u003cli\u003eGlue the bust onto the plinth's post square so it doesn't lean.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, blonde elf, 13 pieces","offer_id":67722769760485,"sku":"NNF-A-0023","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-blonde-elf-mage-backpack-bust-resin-kit-01.jpg?v=1792160603"},{"product_id":"anime-white-maned-ninja-giant-scroll-bust-resin-garage-kit","title":"Anime White-Maned Ninja Bust Resin Garage Kit – Giant Scroll, Horned Headband \u0026 Long Spiky Mane on a Plinth (Unpainted, 10 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 10 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the white-maned, wandering ninja master from a famous ninja anime, taken from the studio's giant-toad diorama. He grins back over his shoulder with one hand raised in front of him, two fingers up. His long, spiky mane sweeps back past his shoulders, he wears a horned metal headband marked with a single character, and the giant scroll is strapped across his back. In the studio's painted design his hair is white, red lines run down from his eyes, and he wears a red sleeveless vest over an olive-green top. The bust stands on a square stepped plinth.\u003c\/p\u003e\u003cp\u003eThis listing is the bust, 114 mm tall on the studio's bust sheet. The full 1:10 diorama and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 8 pieces:\u003c\/strong\u003e head, two front hair locks, the mane, chest with the vest, the raised forearm with two fingers up, the other shoulder and the giant scroll.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 114 mm (4.49 in) tall (from the studio's bust sheet, which gives no width or length).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe long mane and the giant scroll both hang off the back of the bust. Pin them.\u003c\/li\u003e\n\u003cli\u003eThe two front hair locks and the raised fingers are small. Fit them last with tweezers.\u003c\/li\u003e\n\u003cli\u003eThe kit includes two plinths, a smaller and a larger one; use either. Glue the bust on straight so it doesn't lean.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 10 pieces","offer_id":67722769858789,"sku":"NNF-A-0026","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/anime-white-maned-ninja-giant-scroll-bust-resin-kit-01.jpg?v=1792160614"},{"product_id":"video-game-bandana-brawler-heart-boxers-cat-on-shoulder-torn-cape-bust-resin-garage-kit","title":"Fantasy Dungeon Brawler Bust Resin Garage Kit – Bandana Mask, Leather Vest, Crowned Cat on His Shoulder \u0026 Stepped Plinth (Unpainted, 9 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 9 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the hero of a popular comic-fantasy book series about a deadly dungeon run as a game show, with his royal cat riding on his shoulder. He is shown from the waist up in a sleeveless vest with snaps, a flap pocket and a round pin on the chest, a bandana pulled over his nose and mouth, his hair brushed up and back, and the cowl and short mantle of his cape over his shoulders. The long-haired cat sits on his shoulder in sunglasses, a spiked crown and a collar with a butterfly charm, her tail curled up behind her. The arms end at the shoulders, and the bust stands on a stepped square plinth. The studio calls this the 1:10 bust. The full 1:10 scale figure and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e9 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure, 4 pieces:\u003c\/strong\u003e head with the bandana, vest torso and two shoulder pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCat, 2 pieces:\u003c\/strong\u003e the crowned cat and her separate sunglasses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCape, 1 piece:\u003c\/strong\u003e the cowl and short shoulder mantle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 99 mm (3.90 in) tall (from the studio's bust sheet).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe cat sits on the mantle over one shoulder. Glue the mantle to the torso first, then seat the cat.\u003c\/li\u003e\n\u003cli\u003eThe cat's sunglasses are a tiny separate part. Glue them on with tweezers.\u003c\/li\u003e\n\u003cli\u003eThe crown points and the frayed edge of the mantle are thin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 9 pieces","offer_id":67722776543461,"sku":"NNF-A-0037","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-bandana-brawler-heart-boxers-cat-on-shoulder-torn-cape-bust-resin-kit-01.jpg?v=1792160642"},{"product_id":"cartoon-water-wielding-girl-blue-tunic-bust-resin-garage-kit","title":"Cartoon Water-Wielding Girl Bust Resin Garage Kit – Blue Tunic, Arm Wraps \u0026 Flying Hair on a Plinth (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the young water-wielding heroine from a much-loved animated fantasy series, cut from the studio's water-spout statue. Her arms are spread wide, one reaching up and back with the fingers spread and the other held out to the side, and her long hair flies up and back with two front loops pinned by small clasps. She has a set, determined look and wears a sleeveless tunic with a collar band and wrapped forearms with fingerless gloves. In the studio's painted design her hair is brown, the tunic is blue and the arm wraps are violet-blue. The bust stands on a small square plinth.\u003c\/p\u003e\u003cp\u003eThis listing is the bust, 111 mm tall on the studio's scale sheet. The full 1:10 statue and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e head, front hair, back hair, torso and two arms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 111 mm (4.37 in) tall (from the studio's scale sheet, which gives no width or length for the bust).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBoth arms reach out wide from the shoulders. Pin them at the shoulder joins.\u003c\/li\u003e\n\u003cli\u003eThe flying back hair is a large, thin piece. Dry-fit it with the front hair before gluing.\u003c\/li\u003e\n\u003cli\u003eThin parts: the spread fingers, the hair tips and the hair loops.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 8 pieces","offer_id":67722777067749,"sku":"NNF-A-0033","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/cartoon-water-wielding-girl-blue-tunic-bust-resin-kit-01.jpg?v=1792160706"},{"product_id":"comic-winged-helmet-hammer-heroine-bust-resin-garage-kit","title":"Comic Book Hammer Heroine Bust Resin Garage Kit – Two Heads, Two Hammers, Short Cape \u0026 Knotwork Pedestal (Unpainted, 10 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 10 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the hammer-wielding heroine from a famous comic book universe. She is shown from the waist up, one arm raised straight overhead with her hammer and the other fist clenched at her shoulder. A short cape rises behind the raised arm and her long hair blows back from the winged helmet. She wears the dark steel breastplate with its engraved collar, a round shoulder guard and engraved bracers. The bust stands on a round pedestal: a pitted stone drum on a stepped foot with a band of Celtic knotwork.\u003c\/p\u003e\u003cp\u003eBoth heads and both hammers are in the box: the winged helmet or her bare head, and the plain hammer or the ring of hammer heads that looks like the hammer spinning. Swap them as you like. This listing is the bust; the full figure on its storm cloud base is sold as a separate listing.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 10 pieces:\u003c\/strong\u003e the helmeted head and the bare head, bust torso, two arms, a shorter cape, the plain hammer with its hand, the spinning hammer ring and the hand that grips it, and the round pedestal. Both heads and both hammers are in the box; the spinning hammer isn't shown on the bust in the photo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTallest single piece:\u003c\/strong\u003e the cape, 119.6 mm (4.71 in) in the sculptor's file. The sculptor doesn't publish an assembled height for the bust, so I don't list one.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe raised arm holds the hammer high over the head. Pin the hammer into the hand and the arm into the shoulder; the round pedestal is the counterweight.\u003c\/li\u003e\n\u003cli\u003eThe cape is a thin cupped sheet that rises behind the raised arm. Pin it to the back of the torso.\u003c\/li\u003e\n\u003cli\u003eBoth heads and both hammers are in the box. Pin the head and the hammer hand without glue if you want to swap them.\u003c\/li\u003e\n\u003cli\u003eThe hair strands and the helmet wings are thin and delicate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003e3DMoon (3Dmoonn)\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/3Dmoonn\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/3Dmoonn\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/3dmoonn.gumroad.com\" target=\"_blank\" rel=\"noopener\"\u003eGumroad\u003c\/a\u003e · \u003ca href=\"https:\/\/cults3d.com\/en\/users\/3Dmoonn\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/3dmoonn\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"3DMoon","offers":[{"title":"Bust, 10 pieces","offer_id":67722777297125,"sku":"3DM-A-0030","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/comic-winged-helmet-hammer-heroine-bust-resin-kit-01.jpg?v=1792160720"},{"product_id":"video-game-fur-collar-leather-jacket-swordsman-bust-resin-garage-kit","title":"Video Game Leather Jacket Swordsman Bust Resin Garage Kit – Feathered Fur Collar, Outstretched Arm \u0026 Stepped Plinth (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the brooding young mercenary hero from a classic role-playing game. It shows his head with the long fringe falling between his eyes, his short leather jacket with the thick feathered collar, the full-length zipper and the strapped cuffs over a V-neck shirt, and one arm thrust straight out to the side with the fingers spread. The bust stands on a stepped plinth. The full 1:10 scale statue and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust, 6 pieces:\u003c\/strong\u003e head, front hair, chest, feathered collar, the outstretched arm and a short shoulder piece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 77 mm (3.03 in) tall (from the studio's scale sheet, which gives no width or length for the bust).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe feathered collar is a separate piece that wraps the neck and shoulders. Dry-fit it with the head before gluing either.\u003c\/li\u003e\n\u003cli\u003eThe outstretched arm reaches well out from the chest. Pin it at the shoulder.\u003c\/li\u003e\n\u003cli\u003eThe kit includes two plinths, a smaller and a larger one; use either. Glue the bust on straight so it doesn't lean.\u003c\/li\u003e\n\u003cli\u003eThin parts: the collar feathers, the front hair and the spread fingers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 8 pieces","offer_id":67722777493733,"sku":"NNF-A-0100","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-fur-collar-leather-jacket-swordsman-bust-resin-kit-01.jpg?v=1792160744"},{"product_id":"video-game-moon-circlet-witch-raised-staff-bust-resin-garage-kit","title":"Video Game Moon Circlet Witch Bust Resin Garage Kit – Raised Staff \u0026 Crescent Moon Circlet on a Square Plinth (Unpainted, 5 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 5 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the witch princess from a Greek-myth action game. It shows her from the waist up with one arm raised straight overhead gripping her long staff. She has a short chin-length bob and a circlet with a crescent moon on her forehead, and wears her dress with a pendant at the neck. The bust stands on a square plinth. This listing is the bust only, 116 mm tall on the studio's scale sheet; the 1:10 scale statue with the axe, crescent of magic and skull shrine plinth and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure, 3 pieces:\u003c\/strong\u003e head, torso, and the raised arm with the staff.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 116 mm (4.57 in) tall (from the studio's scale sheet, which gives the bust's height only).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe raised arm carries the whole staff. Pin it at the shoulder.\u003c\/li\u003e\n\u003cli\u003eThe staff is long and thin. Handle it with care while removing supports.\u003c\/li\u003e\n\u003cli\u003eGlue the bust to the plinth last, once the arm is set.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 5 pieces","offer_id":67722777985253,"sku":"NNF-A-0052","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-moon-circlet-witch-raised-staff-bust-resin-kit-01.jpg?v=1792160778"},{"product_id":"video-game-horned-helmet-warrior-axe-shield-bust-resin-garage-kit","title":"Video Game Horned-Helmet Warrior Bust Resin Garage Kit – Raised Axe, Round Shield \u0026 Stepped Plinth (Unpainted, 8 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the hero of a famous open-world fantasy role-playing game, in his horned steel helmet. It shows him from the chest up, roaring under the helmet's nose guard and cheek plates, with a one-handed war axe raised overhead and a round wooden shield pushed forward. He wears the stitched leather vest with straps crossing the chest and a round medallion. The bust stands on a square stepped plinth. This listing is the bust only, 126 mm tall on the studio's scale sheet; the 1:10 scale diorama with the fallen troll and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure, 4 pieces:\u003c\/strong\u003e the helmeted head, the chest and two forearms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeapons, 2 pieces:\u003c\/strong\u003e the axe and the shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 126 mm (4.96 in) tall (from the studio's scale sheet). The larger plinth is 66.2 × 66.2 mm (2.61 × 2.61 in) square in the sculptor's file.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe axe arm reaches straight up with the axe at the end, and the shield sits out in front on the other forearm. Pin both forearms at the elbow.\u003c\/li\u003e\n\u003cli\u003eThe helmet horns and the axe haft are thin.\u003c\/li\u003e\n\u003cli\u003eThe kit includes two plinths, a smaller and a larger one; use either. Glue the bust on straight so it doesn't lean.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 8 pieces","offer_id":67722780868837,"sku":"NNF-A-0049","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-horned-helmet-warrior-axe-shield-bust-resin-kit-01.jpg?v=1792160859"},{"product_id":"video-game-horned-demon-woman-bust-resin-garage-kit","title":"Video Game Horned Demon Woman Bust Resin Garage Kit – Ridged Horns, Long Wavy Hair \u0026 Tank Top on a Square Plinth (Unpainted, 11 Pieces)","description":"\u003cdiv style=\"border:2px solid #b00020;border-radius:6px;padding:14px 16px;margin-bottom:18px;background:#fff5f5\"\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures are the sculptor's digital renders of the painted design. Your kit arrives as 11 separate pieces of plain, single-color resin. It is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnassembled:\u003c\/strong\u003e you glue the pieces together yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnprimed:\u003c\/strong\u003e it needs primer before paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnsanded:\u003c\/strong\u003e seams and surfaces need sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnpainted:\u003c\/strong\u003e all painting is up to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExpect supports and support marks.\u003c\/strong\u003e Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.\u003c\/p\u003e\n\u003cp\u003eThis kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eA fan-art bust of the red-skinned demon heroine from a recent superhero workplace comedy game. Two ridged horns rise from her long, wavy hair, which falls past her shoulders, and she wears a plain scoop-neck tank top. The bust is cut at the upper arms and the waist and stands on a square plinth. This listing is the bust only, 99 mm tall on the studio's scale sheet; the 1:10 scale statue with the blade, portal and street base and the miniature are sold as separate listings.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e11 resin pieces in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead and hair, 6 pieces:\u003c\/strong\u003e head, fringe, two hair pieces and two horns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody, 3 pieces:\u003c\/strong\u003e the torso in the tank top and two shoulders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlinths, 2 pieces:\u003c\/strong\u003e two plinths (alternate stands), one smaller and one larger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBust:\u003c\/strong\u003e 99 mm (3.90 in) tall (from the studio's scale sheet, which gives the bust's height only).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eAbout the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eSkill level: advanced\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe fringe and the two horns are small separate parts that glue onto the head; the horn tips are thin.\u003c\/li\u003e\n\u003cli\u003eThe two hair pieces fall over the shoulders. Dry-fit them with the shoulders in place before gluing.\u003c\/li\u003e\n\u003cli\u003eThe shoulder joins sit on smooth skin. Plan to fill and sand those seams.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou'll need (not included):\u003c\/strong\u003e sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.\u003c\/p\u003e\u003ch3\u003eHow ordering works\u003c\/h3\u003e\u003cp\u003eEvery kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap \u003cstrong\u003eNotify me\u003c\/strong\u003e and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.\u003c\/p\u003e\u003ch3\u003eShipping and returns\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e to addresses in the 50 US states, Washington, DC, and military APO\/FPO addresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternational or US territory address?\u003c\/strong\u003e You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day free returns.\u003c\/strong\u003e If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSculptor credit and license\u003c\/h3\u003e\u003cp\u003eThis sculpt is by \u003cstrong\u003eNomNom Figures\u003c\/strong\u003e. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatreon: \u003ca href=\"https:\/\/www.patreon.com\/NomnomFigures\" target=\"_blank\" rel=\"noopener\"\u003epatreon.com\/NomnomFigures\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuy the 3D files: \u003ca href=\"https:\/\/cults3d.com\/en\/users\/Nomnom_figures\/3d-models\" target=\"_blank\" rel=\"noopener\"\u003eCults3D\u003c\/a\u003e · \u003ca href=\"https:\/\/www.cgtrader.com\/designers\/nomnomfigures-official\" target=\"_blank\" rel=\"noopener\"\u003eCGTrader\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.\u003c\/em\u003e\u003c\/p\u003e","brand":"NomNom Figures","offers":[{"title":"Bust, 11 pieces","offer_id":67722781229285,"sku":"NNF-A-0046","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/7423\/9973\/files\/video-game-horned-demon-woman-bust-resin-kit-01.jpg?v=1792160874"}],"url":"https:\/\/store.3dprintedgaragekits.com\/collections\/busts.oembed?page=3","provider":"3d Printed Garage Kits","version":"1.0","type":"link"}