Sculptor's render of the painted design (kit ships unpainted): front view of the full figure on the stepped stone base with a sword in each hand

Anime Armored Swordswoman Resin Garage Kit – Rabbit-Ear Headband, Crimson & Silver Twin Swords, Stone Step Base (Unpainted, 12 Pieces)

Full kit, 12 pieces
$129.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the full figure on the stepped stone base with a sword in each hand
  • Sculptor's render of the painted design (kit ships unpainted): front view of the full figure on the stepped stone base with a sword in each hand
  • Sculptor's render (kit ships unpainted): low front view with the full length of the crimson sword
  • Sculptor's render (kit ships unpainted): front view showing the leg armor and the panels sweeping out behind
  • Sculptor's render (kit ships unpainted): high three-quarter view showing the three tiers of the base from above
  • Sculptor's render (kit ships unpainted): tilted three-quarter view with the crimson sword held out and her hair streaming
  • Sculptor's render (kit ships unpainted): side view from her left with the short silver sword across her legs
  • Sculptor's render (kit ships unpainted): rear view with the long hair, the back of the ear headband and the armored elbows
  • Sculptor's render (kit ships unpainted): close-up of the face, ear headband, gem collar and breastplate
  • Sculptor's render of the painted design (kit ships unpainted): front view of the full figure on the stepped stone base with a sword in each hand
  • Sculptor's render (kit ships unpainted): low front view with the full length of the crimson sword
  • Sculptor's render (kit ships unpainted): front view showing the leg armor and the panels sweeping out behind
  • Sculptor's render (kit ships unpainted): high three-quarter view showing the three tiers of the base from above
  • Sculptor's render (kit ships unpainted): tilted three-quarter view with the crimson sword held out and her hair streaming
  • Sculptor's render (kit ships unpainted): side view from her left with the short silver sword across her legs
  • Sculptor's render (kit ships unpainted): rear view with the long hair, the back of the ear headband and the armored elbows
  • Sculptor's render (kit ships unpainted): close-up of the face, ear headband, gem collar and breastplate
Anime Armored Swordswoman Resin Garage Kit – Rabbit-Ear Headband, Crimson & Silver Twin Swords, Stone Step Base (Unpainted, 12 Pieces)

Anime Armored Swordswoman Resin Garage Kit – Rabbit-Ear Headband, Crimson & Silver Twin Swords, Stone Step Base (Unpainted, 12 Pieces)

$129.00
KitFull kit, 12 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 12 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the red-haired armored swordswoman from a popular fantasy anime. She strides forward across a three-tier stone base with a long crimson sword in her right hand and a shorter silver sword in her left, her long red hair and the panels of her outfit streaming out to one side. She wears a dark brown armored bodysuit with gold trim and long gold-bordered panels, a high collar with a green gem and a bow tie, a rabbit-ear headband, armored gauntlets, gunmetal leg plates and strappy black sandals.

What's in the kit

  • 12 resin pieces in total.
  • Figure, 6 pieces: head with hair, torso, two arms (each with its sword attached) and two legs.
  • Headband, 1 piece: the rabbit-ear headband.
  • Outfit panels, 4 pieces: the four long hanging panels.
  • Base, 1 piece: the three-tier stone base as a single part.
  • Tallest single piece: one leg, 136.0 mm (5.35 in) in the sculptor's file. The finished figure stands taller once the other parts and the base are added. The sculptor doesn't publish an assembled height, so I don't list one.
  • Base: 155.8 × 149.7 mm (6.13 × 5.89 in) across in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Each arm comes with its sword attached, and the long crimson blade reaches well out from the shoulder. Pin both shoulders.
  • The four outfit panels are thin sheets glued along one edge, with both faces on show. Dry-fit them before gluing and take care cleaning support marks.
  • The arm joins sit on bare skin at the shoulders, so fill and sand those seams before paint.
  • Pin both feet into the base, and fit the thin ear headband last.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like