Sculptor's render of the painted design (kit ships unpainted): front view of the giant monk in prayer, the chain looping over his head to the hand axe on one side and the spiked ball on the stone base

Anime Giant Warrior Monk Resin Garage Kit – Prayer Beads, Spiked Flail & Hand Axe on an Overhead Chain Loop, Cracked Stone Base (Unpainted, 19 Pieces)

Full kit, 19 pieces
$144.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the giant monk in prayer, the chain looping over his head to the hand axe on one side and the spiked ball on the stone base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the giant monk in prayer, the chain looping over his head to the hand axe on one side and the spiked ball on the stone base
  • Sculptor's render (kit ships unpainted): front view from slightly lower, showing the full chain loop and the flaring olive coat
  • Sculptor's render (kit ships unpainted): three-quarter view with the axe floating out past his shoulder and the spiked ball by his foot
  • Sculptor's render (kit ships unpainted): front view from above, showing the cracked stone slab on the round black plinth
  • Sculptor's render (kit ships unpainted): rear view of the olive coat with its lettered patches and the chain arcing overhead
  • Sculptor's render (kit ships unpainted): closer view of the upper body with the red prayer beads, the hand raised in prayer and the chain in his fist
  • Sculptor's render (kit ships unpainted): close-up of the face with blank white eyes, tear tracks and the scar across the forehead
  • Sculptor's render (kit ships unpainted): unpainted gray view of the whole sculpt from the front
  • Sculptor's render of the painted design (kit ships unpainted): front view of the giant monk in prayer, the chain looping over his head to the hand axe on one side and the spiked ball on the stone base
  • Sculptor's render (kit ships unpainted): front view from slightly lower, showing the full chain loop and the flaring olive coat
  • Sculptor's render (kit ships unpainted): three-quarter view with the axe floating out past his shoulder and the spiked ball by his foot
  • Sculptor's render (kit ships unpainted): front view from above, showing the cracked stone slab on the round black plinth
  • Sculptor's render (kit ships unpainted): rear view of the olive coat with its lettered patches and the chain arcing overhead
  • Sculptor's render (kit ships unpainted): closer view of the upper body with the red prayer beads, the hand raised in prayer and the chain in his fist
  • Sculptor's render (kit ships unpainted): close-up of the face with blank white eyes, tear tracks and the scar across the forehead
  • Sculptor's render (kit ships unpainted): unpainted gray view of the whole sculpt from the front
Anime Giant Warrior Monk Resin Garage Kit – Prayer Beads, Spiked Flail & Hand Axe on an Overhead Chain Loop, Cracked Stone Base (Unpainted, 19 Pieces)

Anime Giant Warrior Monk Resin Garage Kit – Prayer Beads, Spiked Flail & Hand Axe on an Overhead Chain Loop, Cracked Stone Base (Unpainted, 19 Pieces)

$144.00
KitFull kit, 19 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 19 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the towering, blind warrior monk from a hugely popular anime about demon hunters. He stands square with his feet planted wide on a cracked stone slab, his right hand raised flat in front of his chest in prayer and his left fist closed around a heavy chain. The chain loops up over his head in a wide arc and comes down on one side to a hand axe that floats out past his shoulder, and on the other side to a spiked ball resting on the base beside his foot. His eyes are blank and white with a tear track down each cheek, a wavy scar crosses his forehead under short black spiky hair, and his forearms are thick with raised veins. He wears a black high-collared uniform with wide trousers gathered at the calf, white leg wraps and sandals, a long string of large red prayer beads around his neck and looped around one forearm, and an olive coat with white lapel bands and patches lettered in black that flares straight out to both sides. The base is a rough grey stone slab on a round black plinth, with a small sculpted logo plaque on the front rim.

What's in the kit

  • 19 resin pieces in total.
  • Figure, 5 pieces: head, chest with the upper arms and the neck beads, legs with the sandals, and two hands.
  • Coat, 2 pieces: the two flaring halves of the coat.
  • Weapons, 7 pieces: the spiked ball on a length of chain, and the rest of the chain and the axe in six sections.
  • Base, 5 pieces: the round base in four quarters and a small fifth base piece.
  • Tallest single piece: the spiked ball with its length of chain, 212.5 mm (8.37 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • The base comes in four quarters; the largest is 158.8 × 160.8 mm (6.25 × 6.33 in) across in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The chain loop is the hard part: seven chain sections arc over his head between his fist, the axe and the spiked ball, and nothing else holds them up. Dry-fit the whole loop first, then pin every join.
  • The spiked ball is a big, heavy part. Pin it to the base. I print it hollow, so fill the small drain holes before priming.
  • The coat comes in two broad, thin halves that flare out to the sides. Pin them at the shoulders.
  • The base comes in four large quarters. Glue and fill those seams first. I print the legs, chest and base quarters hollow, so fill the small drain holes before priming.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Lion Realm Studio. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like