Studio scale and parts sheet (kit ships unpainted): the studio's sizes for this design, the miniature at 125 mm tall, 102 mm wide and 91 mm long, shown assembled beside the larger 1:10 statue and the bust

Anime Blonde Armored Swordswoman Resin Garage Kit – Dragon Head Base, Raised Sword & Crescent Slash Effect (Unpainted, Miniature, 6 Pieces)

Miniature, 6 pieces
$65.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the studio's sizes for this design, the miniature at 125 mm tall, 102 mm wide and 91 mm long, shown assembled beside the larger 1:10 statue and the bust
  • Studio scale and parts sheet (kit ships unpainted): the studio's sizes for this design, the miniature at 125 mm tall, 102 mm wide and 91 mm long, shown assembled beside the larger 1:10 statue and the bust
  • Sculptor's render (kit ships unpainted): the painted design, the blonde swordswoman in a red jacket and silver armor crouched on the dark scaled dragon head; the miniature is the same sculpt at 125 mm tall
  • Sculptor's render (kit ships unpainted): the painted design in a wide view of the whole scene with the pale crescent slash behind her; the miniature is the same sculpt at 125 mm tall
  • Studio scale and parts sheet (kit ships unpainted): the studio's sizes for this design, the miniature at 125 mm tall, 102 mm wide and 91 mm long, shown assembled beside the larger 1:10 statue and the bust
  • Sculptor's render (kit ships unpainted): the painted design, the blonde swordswoman in a red jacket and silver armor crouched on the dark scaled dragon head; the miniature is the same sculpt at 125 mm tall
  • Sculptor's render (kit ships unpainted): the painted design in a wide view of the whole scene with the pale crescent slash behind her; the miniature is the same sculpt at 125 mm tall
Anime Blonde Armored Swordswoman Resin Garage Kit – Dragon Head Base, Raised Sword & Crescent Slash Effect (Unpainted, Miniature, 6 Pieces)

Anime Blonde Armored Swordswoman Resin Garage Kit – Dragon Head Base, Raised Sword & Crescent Slash Effect (Unpainted, Miniature, 6 Pieces)

$65.00
KitMiniature, 6 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 6 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A miniature of the fan-art statue of the blonde knight-swordswoman from a hit Korean action fantasy series about monster-hunting guilds. It is the same scene as the full-size statue at a smaller size: she crouches on top of a huge open-jawed dragon's head, one hand on its snout and her sword thrown up behind her, in a red jacket under silver plate armor with long red sash tails, while a thin crescent slash arcs up from the ground and over her head. At this size the dragon head, horns and rock are a single piece and the figure is in three. The full 1:10 scale statue and the bust are sold as separate listings.

What's in the kit

  • 6 resin pieces in total.
  • Figure, 3 pieces: head, upper body with the arms, sword and sash, and the legs.
  • Accessories, 2 pieces: the scabbard and the slash effect.
  • Base, 1 piece: the dragon head, horns and rock together.
  • Miniature: 125 mm (4.92 in) tall, 102 × 91 mm (4.02 × 3.58 in) footprint (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The miniature is six pieces with the same scene as the full-size statue. The dragon head, horns and rock come as a single piece.
  • The slash effect is a thin curved piece that stands up from the base. Pin its foot.
  • The sword, the sash tails and the scabbard are thin at this size, so take the supports off gently.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like