Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 diorama with the studio's sizes for each version (miniature 69 mm tall), and the parts of each version laid out, the miniature's in the bottom middle

Anime Blonde Officer Resin Garage Kit – Twin Pistols, Leap Over a Broken Desk & Office Diorama (Unpainted, Miniature, 12 Pieces)

Miniature, 12 pieces
$39.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 diorama with the studio's sizes for each version (miniature 69 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 diorama with the studio's sizes for each version (miniature 69 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Sculptor's render (kit ships unpainted): the painted design, the blonde officer in a blue uniform leaping over the split desk with both pistols raised; the miniature is the same sculpt at 69 mm tall, in 12 pieces
  • Sculptor's render (kit ships unpainted): painted side view with both pistols aimed over the split desk; the miniature is the same sculpt at 69 mm tall, in 12 pieces
  • Sculptor's render (kit ships unpainted): painted view from the chair side, the red armchair and toppled lamp; the miniature is the same sculpt at 69 mm tall, in 12 pieces
  • Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 diorama with the studio's sizes for each version (miniature 69 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Sculptor's render (kit ships unpainted): the painted design, the blonde officer in a blue uniform leaping over the split desk with both pistols raised; the miniature is the same sculpt at 69 mm tall, in 12 pieces
  • Sculptor's render (kit ships unpainted): painted side view with both pistols aimed over the split desk; the miniature is the same sculpt at 69 mm tall, in 12 pieces
  • Sculptor's render (kit ships unpainted): painted view from the chair side, the red armchair and toppled lamp; the miniature is the same sculpt at 69 mm tall, in 12 pieces
Anime Blonde Officer Resin Garage Kit – Twin Pistols, Leap Over a Broken Desk & Office Diorama (Unpainted, Miniature, 12 Pieces)

Anime Blonde Officer Resin Garage Kit – Twin Pistols, Leap Over a Broken Desk & Office Diorama (Unpainted, Miniature, 12 Pieces)

$39.00
KitMiniature, 12 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 12 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

The miniature version of a fan-art diorama of the sharpshooting blonde lieutenant from a classic alchemy-and-military anime: the same sculpt as the full diorama, made smaller and in 12 pieces. She leaps across an office desk that has split in two under her, one boot planted on the tilted desktop and the other knee drawn up high, leaning back toward an armchair that tips over behind her, with both arms raised and a pistol in each bare hand aimed at the same target. Her blonde hair is gathered up at the back with a clip and fans out in spikes, with a side-swept fringe across one side of her face and a calm, focused frown. She wears a blue military uniform: a jacket with a stand collar, a front flap with a single button and light piping along every edge, two long coat tails flaring out behind her, a black high-necked undershirt, a braided cord looped from one shoulder across the chest, a belt with a small pouch and a strap over the hip, baggy trousers and knee-high black boots. The scene is a plank floor with a dark wood desk broken into a V, drawers sliding out and one loose drawer, splintered wood bursting from the break, papers spilling across the desktop, a carved armchair with a tufted seat and back shot through in several places, and a table lamp with a six-sided shade, also full of bullet holes, toppling beside it. The studio's scale sheet gives the miniature as 69 mm tall. The full 1:10 scale diorama and the bust are sold as separate listings.

What's in the kit

  • 12 resin pieces in total.
  • Figure, 6 pieces: the head, the upper body with both arms and pistols, the legs, the two coat tails and the belt pouch.
  • Office scene, 6 pieces: the floor with the desk base, the two desktop halves, the drawer, the armchair and the lamp.
  • Miniature: 69 mm (2.72 in) tall, 67 mm (2.64 in) wide and 77 mm (3.03 in) long (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The office is six pieces: the floor comes with the desk base attached, then the two desktop halves, drawer, armchair and lamp. Dry-fit them against the photos before gluing.
  • Her upper body comes with both arms and pistols already attached, so there is no aim to line up. Glue the planted boot to the desktop firmly.
  • Thin parts at this size: the splinters, the papers, the lamp shade, the coat tails and the pistol barrels are very fine. Remove supports slowly.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like