Sculptor's render of the painted design (kit ships unpainted): front view of the boar-masked swordsman with one sword raised behind his head and one held low, blue blade-slash effects around him on the octagonal stone base

Anime Boar-Masked Swordsman Resin Garage Kit – Twin Jagged Swords, Blade-Slash Effects & Octagonal Stone Base, Masked and Unmasked Heads Included (Unpainted, 27 Pieces)

Full kit with both heads, 27 pieces
$137.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the boar-masked swordsman with one sword raised behind his head and one held low, blue blade-slash effects around him on the octagonal stone base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the boar-masked swordsman with one sword raised behind his head and one held low, blue blade-slash effects around him on the octagonal stone base
  • Sculptor's render (kit ships unpainted): the same front view with the unmasked head, black hair fading to blue and green eyes
  • Sculptor's render (kit ships unpainted): three-quarter view showing the fur pelt, the woven navy trousers and the white smoke ring
  • Sculptor's render (kit ships unpainted): low three-quarter view with the lower sword crossing the frame above the stepped plinth
  • Sculptor's render (kit ships unpainted): side view with the raised sword and the tall blade-slash sweep behind him
  • Sculptor's render (kit ships unpainted): rear view with the saw-edged blade across his shoulders and the glassy effects wrapping around him
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the tallest blade-slash sweep rising from the base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the boar-masked swordsman with one sword raised behind his head and one held low, blue blade-slash effects around him on the octagonal stone base
  • Sculptor's render (kit ships unpainted): the same front view with the unmasked head, black hair fading to blue and green eyes
  • Sculptor's render (kit ships unpainted): three-quarter view showing the fur pelt, the woven navy trousers and the white smoke ring
  • Sculptor's render (kit ships unpainted): low three-quarter view with the lower sword crossing the frame above the stepped plinth
  • Sculptor's render (kit ships unpainted): side view with the raised sword and the tall blade-slash sweep behind him
  • Sculptor's render (kit ships unpainted): rear view with the saw-edged blade across his shoulders and the glassy effects wrapping around him
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the tallest blade-slash sweep rising from the base
Anime Boar-Masked Swordsman Resin Garage Kit – Twin Jagged Swords, Blade-Slash Effects & Octagonal Stone Base, Masked and Unmasked Heads Included (Unpainted, 27 Pieces)

Anime Boar-Masked Swordsman Resin Garage Kit – Twin Jagged Swords, Blade-Slash Effects & Octagonal Stone Base, Masked and Unmasked Heads Included (Unpainted, 27 Pieces)

$137.00
KitFull kit with both heads, 27 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 27 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the boar-masked swordsman from a hit demon-hunting anime. He stands square on a plank deck with his feet planted wide, his right hand lifting a saw-edged sword across his shoulders behind his head and his left hand holding a second jagged sword low across his legs. He wears the character's own outfit: the boar-head mask in gray fur with a pink snout and ears, white tusks and glowing ringed eyes, no shirt, a shaggy brown fur pelt at the waist, baggy dark navy trousers gathered at the calf, dark fur wraps on his shins, and bare feet. Five sweeping blade-slash effects in glassy blue rise around him, a ring of white smoke curls over the deck, and a magenta cloth with a black geometric pattern and gold bands lies crumpled under his feet. The base is a stepped octagonal plinth in dark veined stone with gold corner brackets. Both heads are in the box, so you can swap them as you like: the boar mask, or his bare face with chin-length black hair fading to blue at the tips and large green eyes.

What's in the kit

  • 27 resin pieces in total.
  • Figure, 12 pieces: the boar-mask head, the bare head with its separate front hair piece, torso, two arms, the fur pelt, the trousers, two lower legs with feet and the two swords.
  • Base, 15 pieces: the octagonal plinth and plank deck in six sections, five blade-slash effects, two smoke swirls and two pieces of the patterned cloth.
  • Studio size: 1:6 scale, 355 mm (13.98 in) tall, 243 mm (9.57 in) wide and 253 mm (9.96 in) deep (from Tanuki Figures' printing and scale guide).
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build the base first. The plinth and plank deck come in six heavy sections; glue them square and let them set before anything goes on top.
  • The five blade-slash effects and two smoke swirls are thin, curling shells that stand on small contact points around him. Dry-fit them against the photos and pin the tall ones.
  • The raised right arm holds a long blade out behind his head. Pin the shoulder join. Pin the neck without glue if you want to swap between the mask and the bare head; the bare head takes its separate front hair piece.
  • Both swords are very thin, saw-edged blades. Pin them into the hands and fit them last.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like