Studio scale and parts sheet (kit ships unpainted): the single-piece miniature, labeled 75mm, at lower right beside the parts of the larger 178 mm kit

Anime Bounty Hunter Woman Resin Garage Kit – Pistol at Arm's Length, Boot on a Dented Trash Can & Cracked Pavement Base (Unpainted, Miniature, 1 Piece)

Miniature, 1 piece
$39.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the single-piece miniature, labeled 75mm, at lower right beside the parts of the larger 178 mm kit
  • Studio scale and parts sheet (kit ships unpainted): the single-piece miniature, labeled 75mm, at lower right beside the parts of the larger 178 mm kit
  • Studio scale and parts sheet (kit ships unpainted): close view of the miniature from the same sheet, the whole figure on its base with the trash can
  • Sculptor's render (kit ships unpainted): the design in gray, the bob-haired bounty hunter aiming a pistol at arm's length, one boot on a dented trash can; the miniature is the same sculpt at the studio's miniature size
  • Sculptor's render (kit ships unpainted): gray turntable of the design from four sides; the miniature is the same sculpt at the studio's miniature size
  • Studio scale and parts sheet (kit ships unpainted): the single-piece miniature, labeled 75mm, at lower right beside the parts of the larger 178 mm kit
  • Studio scale and parts sheet (kit ships unpainted): close view of the miniature from the same sheet, the whole figure on its base with the trash can
  • Sculptor's render (kit ships unpainted): the design in gray, the bob-haired bounty hunter aiming a pistol at arm's length, one boot on a dented trash can; the miniature is the same sculpt at the studio's miniature size
  • Sculptor's render (kit ships unpainted): gray turntable of the design from four sides; the miniature is the same sculpt at the studio's miniature size
Anime Bounty Hunter Woman Resin Garage Kit – Pistol at Arm's Length, Boot on a Dented Trash Can & Cracked Pavement Base (Unpainted, Miniature, 1 Piece)

Anime Bounty Hunter Woman Resin Garage Kit – Pistol at Arm's Length, Boot on a Dented Trash Can & Cracked Pavement Base (Unpainted, Miniature, 1 Piece)

$39.00
KitMiniature, 1 piece

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as a single piece of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A miniature of the fan-art statue of the gambling, gun-slinging bounty hunter from a classic space-western anime. It is the same sculpt as the 1:10 kit at a much smaller size: her right arm straight out with a pistol, her left hand low with the fingers spread, one boot planted on a round pavement base and the other propped on a dented trash can, its lid knocked askew over a pile of garbage, with a dropped bottle at her feet. She has a short bob with a headband, a cropped jacket pushed off her shoulders, a shirt tied at the front, short shorts and thigh-high stockings. The whole scene comes as a single piece, so there are no joins to fill. The 1:10 scale kit is sold as a separate listing.

What's in the kit

  • 1 resin piece in total.
  • Figure and base, 1 piece: the whole figure, trash can, lid, bottle and pavement base as a single piece.
  • Miniature: the sculptor's single-piece file of the finished figure on its base is 78.0 mm (3.07 in) tall.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The miniature is a single piece, so the work is support removal and cleanup rather than assembly.
  • The pistol arm and the spread fingers reach out from the body and are very thin at this size. Take the supports off them gently.
  • The headband, the hair tips and the bottle are fine details.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like