Sculptor's render of the painted design (kit ships unpainted): shown here in unpainted gray, the bob-haired bounty hunter aiming a pistol at arm's length, one boot propped on a dented trash can on a round pavement base

Anime Bounty Hunter Woman Resin Garage Kit – Pistol at Arm's Length, Boot on a Dented Trash Can & Cracked Pavement Base (Unpainted, 1:10 Scale, 13 Pieces)

1:10 scale, 13 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): shown here in unpainted gray, the bob-haired bounty hunter aiming a pistol at arm's length, one boot propped on a dented trash can on a round pavement base
  • Sculptor's render of the painted design (kit ships unpainted): shown here in unpainted gray, the bob-haired bounty hunter aiming a pistol at arm's length, one boot propped on a dented trash can on a round pavement base
  • Sculptor's photo of an unpainted print: front three-quarter view of the full figure, pistol arm out, raised boot on the trash can
  • Sculptor's photo of an unpainted print: front view with the pistol aimed toward the camera
  • Sculptor's photo of an unpainted print: side view of the raised leg on the trash can and the outstretched pistol arm
  • Sculptor's photo of an unpainted print: view from the pistol side with the open trash can full of garbage
  • Sculptor's photo of an unpainted print: rear view of the full figure with the jacket off the shoulders, the trash can and the dropped bottle
  • Sculptor's render (kit ships unpainted): gray turntable of the full figure from four sides
  • Studio scale and parts sheet (kit ships unpainted): the 13 parts of the 178 mm kit laid out, with the single-piece miniature beside them, over a faded studio render of the design
  • Sculptor's render of the painted design (kit ships unpainted): shown here in unpainted gray, the bob-haired bounty hunter aiming a pistol at arm's length, one boot propped on a dented trash can on a round pavement base
  • Sculptor's photo of an unpainted print: front three-quarter view of the full figure, pistol arm out, raised boot on the trash can
  • Sculptor's photo of an unpainted print: front view with the pistol aimed toward the camera
  • Sculptor's photo of an unpainted print: side view of the raised leg on the trash can and the outstretched pistol arm
  • Sculptor's photo of an unpainted print: view from the pistol side with the open trash can full of garbage
  • Sculptor's photo of an unpainted print: rear view of the full figure with the jacket off the shoulders, the trash can and the dropped bottle
  • Sculptor's render (kit ships unpainted): gray turntable of the full figure from four sides
  • Studio scale and parts sheet (kit ships unpainted): the 13 parts of the 178 mm kit laid out, with the single-piece miniature beside them, over a faded studio render of the design
Anime Bounty Hunter Woman Resin Garage Kit – Pistol at Arm's Length, Boot on a Dented Trash Can & Cracked Pavement Base (Unpainted, 1:10 Scale, 13 Pieces)

Anime Bounty Hunter Woman Resin Garage Kit – Pistol at Arm's Length, Boot on a Dented Trash Can & Cracked Pavement Base (Unpainted, 1:10 Scale, 13 Pieces)

$65.00
Kit1:10 scale, 13 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 13 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the gambling, gun-slinging bounty hunter from a classic space-western anime. She draws on something off to one side: her right arm straight out at shoulder height with a pistol in hand, her left arm low and away from her body with the fingers spread, and her head turned toward the gun. She stands on one leg with the boot planted on the pavement and props the other boot on top of a dented, ribbed trash can tipped against her shin, its lid knocked askew over a pile of garbage. She has a short bob with a headband and a fringe swept to one side. She wears a cropped jacket pushed down off both shoulders with the sleeves bunched at the forearms, a shirt tied in a knot at the front, short shorts with suspender straps, thigh-high stockings with rolled tops, and heeled ankle boots with slouched socks over them. The base is a round disc of cracked pavement with scattered debris and a dropped bottle. This listing is the full kit at 1:10 scale. The single-piece miniature is sold as a separate listing.

What's in the kit

  • 13 resin pieces in total.
  • Figure, 9 pieces: head and upper torso, hips with the shorts, the jacket with the hanging arm, the hand with the pistol, the spread hand, two legs and two boots.
  • Scene, 4 pieces: the pavement base, the trash can, its lid and the bottle.
  • 1:10 scale: tallest single piece, the trash can, 69.9 mm (2.75 in) in the sculptor's file. The round base is 78.7 × 78.7 mm (3.10 × 3.10 in) across in the sculptor's file. The sculptor doesn't publish an assembled height for this version, so I don't list one.
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • She stands on one leg. That leg and boot carry everything above them into the base, so pin the ankle and the thigh.
  • Fit the trash can to the base first: the raised boot only lands right if the can sits where the sculptor put it.
  • The pistol hand is a long, thin piece that reaches straight out from the shoulder; pin it. The spread fingers on the other hand are fragile.
  • The thigh joins land on smooth skin; plan to fill and sand them.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like