Anime Braided Witch Mage Resin Garage Kit – Wide-Brim Hat, Tall Staff, Flared Cape & Water Splash Base, Hat and Hatless Heads Both Included (Unpainted, 23 Pieces)
Anime Braided Witch Mage Resin Garage Kit – Wide-Brim Hat, Tall Staff, Flared Cape & Water Splash Base, Hat and Hatless Heads Both Included (Unpainted, 23 Pieces)
Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works
IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.
The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 23 separate pieces of plain, single-color resin. It is:
- Unassembled: you glue the pieces together yourself.
- Unprimed: it needs primer before paint.
- Unsanded: seams and surfaces need sanding.
- Unpainted: all painting is up to you.
Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.
This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.
A fan-art statue of the blue-haired water mage and tutor from a popular fantasy reincarnation anime, caught mid-spell. She stands with her feet planted wide in a swirl of water, her right arm thrown straight out with the fingers spread, her left hand gripping a tall staff low at her side, mouth open as she casts. A long blue braid swings out behind her, and a wide cape, tan outside with a cream lining and a navy-and-white striped hem, flares out on both sides. She wears a dark wide-brimmed witch hat with a tan band, a short brown mantle with a stand-up white collar, a white jacket with navy trim over a blue-gray tunic with gold bands and dark crossed straps, a short dark skirt with a scalloped, dotted hem, long white-gray sleeves with dark cuffs, and white boots with dark tops. The staff is pale cream with a hooked crescent head, a dark ringed collar and a hanging chain of blue crystal beads. The base is a round disc of water with translucent ribbons of splash rising around her boots. Both heads are in the box; swap them as you like: one under the witch hat, and a hatless head with a single raised strand of hair, shown in the render's round inset.
What's in the kit
- 23 resin pieces in total.
- Figure and base, 17 pieces: the torso with its crossed straps, the jacket, the skirt, the shoulders and arms with the collar, two hands, the legs, two boots, the cape, four small cuff, strap and ribbon pieces, the staff in two pieces, and the water-splash base.
- Witch hat head, 3 pieces: the face with the braid, the front hair and the wide-brimmed hat.
- Hatless head, 3 pieces: the face, the front hair with a raised strand, and the back hair with the braid.
- Tallest single piece: the staff shaft, 133.0 mm (5.24 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
- Water-splash base: 138.1 × 138.1 mm (5.44 × 5.44 in) across in the sculptor's file. The cape is wider than the base and overhangs it on both sides.
- Scale: about 1:10 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:10 figures, and scale can differ from one creator to another.
About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
Skill level: advanced
- The cape is a large, thin shell that hangs from the shoulders and flares past the base on both sides. Pin it at the shoulders.
- The staff is a long, thin shaft with a separate ornate head. Pin the head to the shaft and fit the staff into the hand after the arms are on.
- She stands on two boots inside the water splash. Dry-fit the boots into the splash before gluing, and pin both.
- Both head sets come in the kit, three pieces each; to swap them later, leave the head unglued on a pin or fit a small magnet. The four small cuff, strap and ribbon pieces are tiny; fit them last.
You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.
How ordering works
Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.
Shipping and returns
- Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
- International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
- 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.
Sculptor credit and license
This sculpt is by Moon Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Moon Figures' commercial tier on Patreon. Please support the artist:
- Patreon: patreon.com/MoonFigures
- Buy the 3D files: Cults3D · Gumroad
Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.