Sculptor's render of the painted design (kit ships unpainted): full front view of the young swordsman in a green-and-black checkered coat holding a sword upright, between an arc of fire and a wave of water on a tiered marble and wood plinth

Anime Checkered Coat Swordsman Resin Garage Kit – Raised Sword, Fire and Water Arcs & Tiered Marble Plinth (Unpainted, 22 Pieces)

Full kit, 22 pieces
$144.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the young swordsman in a green-and-black checkered coat holding a sword upright, between an arc of fire and a wave of water on a tiered marble and wood plinth
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the young swordsman in a green-and-black checkered coat holding a sword upright, between an arc of fire and a wave of water on a tiered marble and wood plinth
  • Sculptor's render (kit ships unpainted): three-quarter view from his left, the water wave curling up around his leg
  • Sculptor's render (kit ships unpainted): side view with the fire arc climbing behind him
  • Sculptor's render (kit ships unpainted): rear view of the checkered coat inside the ring of fire and water
  • Sculptor's render (kit ships unpainted): close-up of the face with the forehead scar, the card earrings and the raised sword hand
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the young swordsman in a green-and-black checkered coat holding a sword upright, between an arc of fire and a wave of water on a tiered marble and wood plinth
  • Sculptor's render (kit ships unpainted): three-quarter view from his left, the water wave curling up around his leg
  • Sculptor's render (kit ships unpainted): side view with the fire arc climbing behind him
  • Sculptor's render (kit ships unpainted): rear view of the checkered coat inside the ring of fire and water
  • Sculptor's render (kit ships unpainted): close-up of the face with the forehead scar, the card earrings and the raised sword hand
Anime Checkered Coat Swordsman Resin Garage Kit – Raised Sword, Fire and Water Arcs & Tiered Marble Plinth (Unpainted, 22 Pieces)

Anime Checkered Coat Swordsman Resin Garage Kit – Raised Sword, Fire and Water Arcs & Tiered Marble Plinth (Unpainted, 22 Pieces)

$144.00
KitFull kit, 22 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 22 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the kind-hearted young swordsman from a hit demon-hunting anime. He stands square to the viewer with his feet planted wide on a wooden platform, his sword raised upright in his right hand beside his head and his left fist at his side, with a set, determined look. He has dark red-brown hair swept back in spiky clumps, a scar on his forehead, large pink-magenta eyes and long card-shaped earrings with a rising-sun design. He wears a green-and-black checkered coat in a coarse woven texture over a black uniform with a white-edged stand collar, buttons and a white belt, loose black trousers gathered into white leg wraps, and sandals with red straps; a black scabbard hangs at his left hip. An arc of flame climbs behind his right shoulder and curls over his head, and a wave of water sweeps in low around his left leg and breaks in a foam crest. The base is three tiers: an octagonal gray marble slab with brass corner caps, a stepped stone block with gold ornaments, and a dark wooden plank platform with a rough edge.

What's in the kit

  • 22 resin pieces in total.
  • Figure, 10 pieces: head, torso, the checkered coat, two coat sleeves, the left forearm with its fist, the right hand, the trousers and two feet.
  • Sword, 3 pieces: the sword and the scabbard in two sections.
  • Base, 3 pieces: the marble slab, the middle stone tier and the wooden platform.
  • Effects, 6 pieces: the fire arc in three sections and the water wave in three sections.
  • Studio size: 401 mm (15.79 in) tall, 230 mm (9.06 in) wide and 220 mm (8.66 in) deep (from Tanuki Figures' notes file).
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build the three base tiers first, then fit the fire and water sections to the wooden platform; both arcs reach high off small roots, so pin every effect join.
  • The coat is a large thin draped shell that wraps over the torso and trousers. Dry-fit it before gluing so the sleeves meet the arms cleanly.
  • The sword is long and very thin and stands straight up from a small hand. Pin it through the grip and fit it last.
  • The fire and water are meant for translucent resin; their flame tips and foam crests are thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like