Sculptor's render of the painted design (kit ships unpainted): front view of the whole figure on the rocky base, hand on hip and rifle angled down past the base edge

Chibi Blonde Soldier in Green Uniform Resin Garage Kit – Bolt-Action Rifle, Hand on Hip & Flagstone Rock Base (Unpainted, 12 Pieces)

Full kit, 12 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the whole figure on the rocky base, hand on hip and rifle angled down past the base edge
  • Sculptor's render of the painted design (kit ships unpainted): front view of the whole figure on the rocky base, hand on hip and rifle angled down past the base edge
  • Sculptor's render (kit ships unpainted): three-quarter view from her left, showing the ponytail and the strapped brown boots
  • Sculptor's render (kit ships unpainted): side profile with the long ponytail, the hand on the hip and the rifle stock behind her
  • Sculptor's render (kit ships unpainted): back view with the ponytail, the plain back of the tunic and the belt
  • Sculptor's render (kit ships unpainted): closer front view of the whole figure with the brooch, medal and belt buckle on the tunic
  • Sculptor's render (kit ships unpainted): close-up of the grinning face with cyan eyes and the brooch at the collar
  • Sculptor's render of the painted design (kit ships unpainted): front view of the whole figure on the rocky base, hand on hip and rifle angled down past the base edge
  • Sculptor's render (kit ships unpainted): three-quarter view from her left, showing the ponytail and the strapped brown boots
  • Sculptor's render (kit ships unpainted): side profile with the long ponytail, the hand on the hip and the rifle stock behind her
  • Sculptor's render (kit ships unpainted): back view with the ponytail, the plain back of the tunic and the belt
  • Sculptor's render (kit ships unpainted): closer front view of the whole figure with the brooch, medal and belt buckle on the tunic
  • Sculptor's render (kit ships unpainted): close-up of the grinning face with cyan eyes and the brooch at the collar
Chibi Blonde Soldier in Green Uniform Resin Garage Kit – Bolt-Action Rifle, Hand on Hip & Flagstone Rock Base (Unpainted, 12 Pieces)

Chibi Blonde Soldier in Green Uniform Resin Garage Kit – Bolt-Action Rifle, Hand on Hip & Flagstone Rock Base (Unpainted, 12 Pieces)

$65.00
KitFull kit, 12 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 12 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the young blonde soldier from a military fantasy anime, standing square with one hand on her hip and a bolt-action rifle held low in the other, its barrel angled down past the edge of the base. She has a big shaggy bob of yellow hair with pointed side tufts, a single looped strand standing up from the crown, a fringe across her forehead and a long ponytail at the back. Her cyan eyes sit under sharply angled brows, and she wears a wide, toothy grin. Her dark green military tunic has a stand collar and red piping along the collar, front edges, hem, shoulder straps and cuffs, with a round brooch at the collar, a winged medal and two small bars pinned on the front, two rows of studs and a belt with a round buckle. Loose green trousers go into calf-high brown boots with ankle straps. She stands on a round patch of earth with flat flagstones under her boots, scattered pebbles and a broken rock behind one boot.

What's in the kit

  • 12 resin pieces in total.
  • Figure, 10 pieces: the head, two hair pieces (the fringe and the ponytail), the tunic, the trousers, two sleeves, the hand on her hip and two boots.
  • Accessories, 1 piece: the right hand gripping the rifle, sculpted together.
  • Base, 1 piece: the round rocky base with flagstones, pebbles and a broken rock.
  • Height: 132.7 mm (5.22 in) tall on its base, measured from the sculptor's single-piece file of the finished figure.
  • Tallest single piece in the kit: the head, 51.6 mm (2.03 in) in the sculptor's file.
  • Rocky base: 72.5 × 71.9 mm (2.85 × 2.83 in) across in the sculptor's file.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The rifle is sculpted onto the right hand as a single part, with a thin barrel reaching well out from a wrist join. Support it along its length and fit it last.
  • The looped strand on top of the head, the pointed hair tufts and the ponytail tips are thin points.
  • The head is the heaviest part and sits on a small tunic and two small boots. Pin the head, and pin both boots to the base.
  • The hand on the hip and both boots are tiny parts that are easy to lose in the wash.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like