Sculptor's render of the painted design (kit ships unpainted): front view of the coat figure in a low stance on the rock base, with every root and both smoke bursts

Chibi Blonde Fighter Resin Garage Kit Bundle – Two Complete Figures, Green Coat and Sleeveless, Each with Roots & Smoke on Its Own Rock Base (Unpainted, 38 Pieces)

Both outfits bundle, two complete figures, 38 pieces
$114.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the coat figure in a low stance on the rock base, with every root and both smoke bursts
  • Sculptor's render of the painted design (kit ships unpainted): front view of the coat figure in a low stance on the rock base, with every root and both smoke bursts
  • Sculptor's render (kit ships unpainted): the same front view of the sleeveless figure, with bare arms banded in black
  • Sculptor's render (kit ships unpainted): three-quarter view from her right, with a ponytail and the coat streaming out to the side
  • Sculptor's render (kit ships unpainted): left side profile with the palm thrust forward, the round emblem on the coat and the strapped sandals
  • Sculptor's render (kit ships unpainted): rear three-quarter view with a ponytail tie and a green root curling around a smoke burst
  • Sculptor's render (kit ships unpainted): back view of the coat and both ponytails over the rock base
  • Sculptor's render (kit ships unpainted): the sleeveless figure seen from slightly above on the full rock base
  • Sculptor's render (kit ships unpainted): low front view of the coat figure against a night mountain backdrop
  • Sculptor's render (kit ships unpainted): front view from hair to sandals of the coat figure, showing the sash, hip panels and trousers
  • Sculptor's render (kit ships unpainted): close-up of the face with amber eyes and the black line markings across the forehead and cheeks
  • Sculptor's render of the painted design (kit ships unpainted): front view of the coat figure in a low stance on the rock base, with every root and both smoke bursts
  • Sculptor's render (kit ships unpainted): the same front view of the sleeveless figure, with bare arms banded in black
  • Sculptor's render (kit ships unpainted): three-quarter view from her right, with a ponytail and the coat streaming out to the side
  • Sculptor's render (kit ships unpainted): left side profile with the palm thrust forward, the round emblem on the coat and the strapped sandals
  • Sculptor's render (kit ships unpainted): rear three-quarter view with a ponytail tie and a green root curling around a smoke burst
  • Sculptor's render (kit ships unpainted): back view of the coat and both ponytails over the rock base
  • Sculptor's render (kit ships unpainted): the sleeveless figure seen from slightly above on the full rock base
  • Sculptor's render (kit ships unpainted): low front view of the coat figure against a night mountain backdrop
  • Sculptor's render (kit ships unpainted): front view from hair to sandals of the coat figure, showing the sash, hip panels and trousers
  • Sculptor's render (kit ships unpainted): close-up of the face with amber eyes and the black line markings across the forehead and cheeks
Chibi Blonde Fighter Resin Garage Kit Bundle – Two Complete Figures, Green Coat and Sleeveless, Each with Roots & Smoke on Its Own Rock Base (Unpainted, 38 Pieces)

Chibi Blonde Fighter Resin Garage Kit Bundle – Two Complete Figures, Green Coat and Sleeveless, Each with Roots & Smoke on Its Own Rock Base (Unpainted, 38 Pieces)

$114.00
KitBoth outfits bundle, two complete figures, 38 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 38 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the legendary blonde healer and fighter from a long-running ninja anime, in a low, wide fighting stance. Her right fist is pulled in close and her left palm is pushed out in front of her with the fingers straight up. Her pale blonde hair is parted in the center, with long front locks framing her face and two low ponytails, tied with dark ties, flying out behind her in forked points. Black line markings cross her forehead in a double X around a small diamond and run down her cheeks. She wears a lavender-gray crossover top, a wide navy sash with gray hip panels, loose navy trousers gathered below the knee and black strappy sandals. Around her the ground is breaking apart: five green roots tear up through a stack of cracked brown rock slabs, and two cream smoke bursts rise behind her.

This listing is a bundle of two complete figures, one in each outfit, each on its own base with its own roots and smoke. On one, a mid-green coat with short wide sleeves, black edging and a round emblem on the back hangs off her shoulders and flares out behind her. The other wears the sleeveless crossover top, with bare arms banded in black at the wrists and upper arms.

What's in the kit

  • 38 resin pieces in total.
  • Coat figure, 19 pieces: the head, four hair pieces (front locks, crown and two ponytails), the torso and both arms in the green coat, the sash with the hip panels, the legs with sandals, five green roots, two cream smoke bursts and the cracked rock base in two halves.
  • Sleeveless figure, 19 pieces: the same build with the torso in the sleeveless crossover top and bare arms banded in black, with its own head, hair, sash, legs, roots, smoke bursts and two-part rock base.
  • Each figure: 144.0 mm (5.67 in) tall on its base, measured from the sculptor's single-piece files of the finished figure (both outfits are the same height).
  • Tallest single piece in the kit: the larger smoke burst, 66.8 mm (2.63 in) in the sculptor's file.
  • Each rock base: 112.4 × 101.6 mm (4.43 × 4.00 in) across, from the sculptor's single-piece file of the same base.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The two ponytails, the smoke spikes, the torn root ends and the straight fingers of the open hand are thin points. Support the curling roots along their whole length.
  • Each figure stands on two sandaled feet in a wide stance. Pin both feet into its base.
  • Each base takes five roots and two smoke bursts around her feet. Dry-fit them all before gluing, and fill the seam between the two base halves.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like