Sculptor's render of the painted design (kit ships unpainted): front view of the blue-haired brawler standing in a sand and rock crater, hands in his pockets, with white smoke and a broken red pillar behind him

Chibi Blue-Haired Brawler Resin Garage Kit – Bone Jaw Mask, Hands in Pockets, Sand Crater Base with Broken Pillar & Smoke (Unpainted, 14 Pieces)

Full kit, 14 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the blue-haired brawler standing in a sand and rock crater, hands in his pockets, with white smoke and a broken red pillar behind him
  • Sculptor's render of the painted design (kit ships unpainted): front view of the blue-haired brawler standing in a sand and rock crater, hands in his pockets, with white smoke and a broken red pillar behind him
  • Sculptor's render (kit ships unpainted): front view from just right of center with the bone mask on his cheek and the rock ring
  • Sculptor's render (kit ships unpainted): three-quarter view from his right front with the jaw mask and the pale blue sheath behind his hip
  • Sculptor's render (kit ships unpainted): three-quarter view from his left with the katana at his hip and the broken pillar in front
  • Sculptor's render (kit ships unpainted): side profile from his right, the sheath angling back over the broken red pillar
  • Sculptor's render (kit ships unpainted): back view with the spiky blue hair and the cracked red pillar beside him
  • Sculptor's render (kit ships unpainted): high front view looking down on the star-shaped crater, smoke and pillar
  • Sculptor's render (kit ships unpainted): straight-on front view of the open white jacket, black sash and pleated hakama
  • Sculptor's render (kit ships unpainted): close front view of the jacket, sash and hands in his pockets
  • Sculptor's render (kit ships unpainted): close-up of the grinning face, teal eye markings and the bone jaw mask with its teeth
  • Sculptor's render of the painted design (kit ships unpainted): front view of the blue-haired brawler standing in a sand and rock crater, hands in his pockets, with white smoke and a broken red pillar behind him
  • Sculptor's render (kit ships unpainted): front view from just right of center with the bone mask on his cheek and the rock ring
  • Sculptor's render (kit ships unpainted): three-quarter view from his right front with the jaw mask and the pale blue sheath behind his hip
  • Sculptor's render (kit ships unpainted): three-quarter view from his left with the katana at his hip and the broken pillar in front
  • Sculptor's render (kit ships unpainted): side profile from his right, the sheath angling back over the broken red pillar
  • Sculptor's render (kit ships unpainted): back view with the spiky blue hair and the cracked red pillar beside him
  • Sculptor's render (kit ships unpainted): high front view looking down on the star-shaped crater, smoke and pillar
  • Sculptor's render (kit ships unpainted): straight-on front view of the open white jacket, black sash and pleated hakama
  • Sculptor's render (kit ships unpainted): close front view of the jacket, sash and hands in his pockets
  • Sculptor's render (kit ships unpainted): close-up of the grinning face, teal eye markings and the bone jaw mask with its teeth
Chibi Blue-Haired Brawler Resin Garage Kit – Bone Jaw Mask, Hands in Pockets, Sand Crater Base with Broken Pillar & Smoke (Unpainted, 14 Pieces)

Chibi Blue-Haired Brawler Resin Garage Kit – Bone Jaw Mask, Hands in Pockets, Sand Crater Base with Broken Pillar & Smoke (Unpainted, 14 Pieces)

$65.00
KitFull kit, 14 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 14 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the blue-haired, panther-like brawler from a long-running sword-fighting anime. He stands square to the front with his feet apart and both hands pushed into his pockets, head tipped forward, grinning through clenched teeth with his eyes cut to one side. His sky-blue hair sweeps up and back into layers of spikes, with teal markings under his eyes and a bone-white jawbone mask fragment, with its own row of teeth, on his right cheek. He wears a cropped white jacket open over a sculpted bare chest and stomach with a round hole in it, a tall stand collar lined in black, black cuffs, a black sash, wide pleated white hakama trousers and black shoes, with a sheathed katana pushed through the sash at his hip. The base is a crater of gritty sand ringed by jagged dark rock slabs over a splash of sand, with white smoke rising around his feet and a broken red pillar leaning behind him.

What's in the kit

  • 14 resin pieces in total.
  • Figure, 6 pieces: the head with most of the hair, a separate front hair section, the torso, two arms and the legs with shoes.
  • Accessories, 2 pieces: the bone jaw mask for his cheek and the sheathed katana.
  • Base, 6 pieces: the crater base in two halves, the broken pillar and three smoke pieces.
  • Tallest single piece: the legs, 65.9 mm (2.59 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Crater base: 91.0 × 87.2 mm (3.58 × 3.43 in) across, from the sculptor's single-piece file of the same base.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The head is more than half the figure's resin on a small torso. Pin the neck, and pin the legs into the base.
  • The jaw mask is a small, thin piece with a row of tiny teeth that glues onto the face. The sheathed katana is long and very thin and threads through the sash; dry-fit it with the left arm before gluing either.
  • The arm joins likely sit at the shoulders on smooth white cloth, where seams show under pale paint.
  • The crater base comes in two halves, with one seam through the sand and the rock ring. Place the pillar and smoke from the renders; there is no layout sheet.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like