Sculptor's render of the painted design (kit ships unpainted): front view of the chibi elf mage with silver twin tails, holding a red gem staff and a small suitcase, on a round stone bed of blue flowers

Chibi Anime Elf Mage Resin Garage Kit – Gem Staff, Suitcase, Flower Bed Base & Treasure-Chest Mimic (Unpainted, 11 Pieces)

Full kit, 11 pieces
$54.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the chibi elf mage with silver twin tails, holding a red gem staff and a small suitcase, on a round stone bed of blue flowers
  • Sculptor's render of the painted design (kit ships unpainted): front view of the chibi elf mage with silver twin tails, holding a red gem staff and a small suitcase, on a round stone bed of blue flowers
  • Sculptor's render (kit ships unpainted): the standing figure beside the treasure-chest mimic with the mage's legs and boots sticking out of its fanged mouth
  • Sculptor's render (kit ships unpainted): three-quarter view with a pointed ear and red drop earring, the suitcase in the foreground
  • Sculptor's render (kit ships unpainted): back view of the hair and twin tails, the staff held diagonally behind her
  • Sculptor's render (kit ships unpainted): close-up of the staff head, a gold crescent holding a red gem with a red cloth wrap, beside the flower bed
  • Sculptor's render (kit ships unpainted): close-up from behind of the suitcase, gold-trimmed tunic and banded boots on the flower bed
  • Sculptor's render (kit ships unpainted): front view of the treasure-chest mimic with fangs, the mage's tunic, folded legs and boots sticking out
  • Sculptor's render (kit ships unpainted): side view of the mimic showing its handle and the boots in front
  • Sculptor's render (kit ships unpainted): rear view of the treasure chest with its brass bands and hinges
  • Sculptor's render of the painted design (kit ships unpainted): front view of the chibi elf mage with silver twin tails, holding a red gem staff and a small suitcase, on a round stone bed of blue flowers
  • Sculptor's render (kit ships unpainted): the standing figure beside the treasure-chest mimic with the mage's legs and boots sticking out of its fanged mouth
  • Sculptor's render (kit ships unpainted): three-quarter view with a pointed ear and red drop earring, the suitcase in the foreground
  • Sculptor's render (kit ships unpainted): back view of the hair and twin tails, the staff held diagonally behind her
  • Sculptor's render (kit ships unpainted): close-up of the staff head, a gold crescent holding a red gem with a red cloth wrap, beside the flower bed
  • Sculptor's render (kit ships unpainted): close-up from behind of the suitcase, gold-trimmed tunic and banded boots on the flower bed
  • Sculptor's render (kit ships unpainted): front view of the treasure-chest mimic with fangs, the mage's tunic, folded legs and boots sticking out
  • Sculptor's render (kit ships unpainted): side view of the mimic showing its handle and the boots in front
  • Sculptor's render (kit ships unpainted): rear view of the treasure chest with its brass bands and hinges
Chibi Anime Elf Mage Resin Garage Kit – Gem Staff, Suitcase, Flower Bed Base & Treasure-Chest Mimic (Unpainted, 11 Pieces)

Chibi Anime Elf Mage Resin Garage Kit – Gem Staff, Suitcase, Flower Bed Base & Treasure-Chest Mimic (Unpainted, 11 Pieces)

$54.00
KitFull kit, 11 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 11 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the elf mage from a popular fantasy anime, with a second small piece that plays on the show's running joke about treasure-chest mimics. The standing figure waits on a round stone flower bed full of blue flowers, holding her staff low in one hand and a small suitcase in the other. She has silver twin tails, long pointed ears with red drop earrings, large green eyes and a flat, slightly weary expression. She wears a white capelet and tunic trimmed in gold over a striped shirt, a dark belt with a square buckle, dark leggings and banded brown boots. The staff has a crimson shaft and a gold crescent head holding a large red gem, with a red cloth wrapped where the crescent meets the shaft. The second piece is a red treasure chest with brass bands, its lid propped open on rows of ivory fangs, with the same mage swallowed head-first: only her tunic, her folded legs and boots and the ends of her twin tails stick out of its mouth.

What's in the kit

  • 11 resin pieces in total.
  • Standing figure, 4 pieces: the head with the hair and twin tails, the body, the hand with the staff and the hand with the suitcase.
  • Base, 1 piece: the round stone flower bed.
  • Treasure-chest mimic, 6 pieces: the chest, the open lid with its fangs, the mage's tunic, her folded legs and boots, and two twin-tail ends.
  • Studio size, standing figure: 112 mm (4.41 in) tall, 87 mm (3.43 in) wide and 73 mm (2.87 in) deep (from Tanuki Figures' notes file for this kit).
  • Treasure chest: 45.7 × 33.3 mm (1.80 × 1.31 in) footprint in the sculptor's file. The studio doesn't publish the mimic's height, so I don't list one.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The head is most of the standing figure's weight. Pin it to the body.
  • The staff is long and thin and hangs out past the base, held only by the hand. Clip its supports slowly and fit it after the head.
  • The mimic's two twin-tail ends are tiny. Use tweezers.
  • The fangs are two rows of small sharp cones; the earrings and the gem can be finished with gloss varnish.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like