Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the whole figure crouched on the rock base, with the cleaver blade over his shoulder, the skull pile, the plaque and the yellow flame behind

Chibi Eyepatch Swordsman Resin Garage Kit – Giant Cleaver Blade, Skull Pile & Yellow Flame on Rock Base (Unpainted, 14 Pieces)

Full kit, 14 pieces
$75.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the whole figure crouched on the rock base, with the cleaver blade over his shoulder, the skull pile, the plaque and the yellow flame behind
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the whole figure crouched on the rock base, with the cleaver blade over his shoulder, the skull pile, the plaque and the yellow flame behind
  • Sculptor's render (kit ships unpainted): view from his left front under neutral light, showing the silver blade, khaki spine and green tassel above his head
  • Sculptor's render (kit ships unpainted): side view from his eyepatch side, with the hilt across his body, the blade seen edge-on and the flame trailing behind
  • Sculptor's render (kit ships unpainted): side view from his left, with the long hair down his back, the fist through a torn sleeve and the flame curling up behind
  • Sculptor's render (kit ships unpainted): back view, with the translucent yellow flame wrapping the back of the rock and the blade's spine and tassel above
  • Sculptor's render (kit ships unpainted): high front view looking down on the hair spikes and the bare foot planted on the skull pile
  • Sculptor's render (kit ships unpainted): closer front view of the grin, the open coat, the sash bow and the hand resting on the bandaged hilt
  • Sculptor's render (kit ships unpainted): close front view of the head and chest with the hand on the hilt and the tassel behind his head
  • Sculptor's render (kit ships unpainted): the same close view lit brighter, for checking colors
  • Sculptor's render (kit ships unpainted): close-up of the face with the riveted eyepatch, the long scar and the toothy grin
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the whole figure crouched on the rock base, with the cleaver blade over his shoulder, the skull pile, the plaque and the yellow flame behind
  • Sculptor's render (kit ships unpainted): view from his left front under neutral light, showing the silver blade, khaki spine and green tassel above his head
  • Sculptor's render (kit ships unpainted): side view from his eyepatch side, with the hilt across his body, the blade seen edge-on and the flame trailing behind
  • Sculptor's render (kit ships unpainted): side view from his left, with the long hair down his back, the fist through a torn sleeve and the flame curling up behind
  • Sculptor's render (kit ships unpainted): back view, with the translucent yellow flame wrapping the back of the rock and the blade's spine and tassel above
  • Sculptor's render (kit ships unpainted): high front view looking down on the hair spikes and the bare foot planted on the skull pile
  • Sculptor's render (kit ships unpainted): closer front view of the grin, the open coat, the sash bow and the hand resting on the bandaged hilt
  • Sculptor's render (kit ships unpainted): close front view of the head and chest with the hand on the hilt and the tassel behind his head
  • Sculptor's render (kit ships unpainted): the same close view lit brighter, for checking colors
  • Sculptor's render (kit ships unpainted): close-up of the face with the riveted eyepatch, the long scar and the toothy grin
Chibi Eyepatch Swordsman Resin Garage Kit – Giant Cleaver Blade, Skull Pile & Yellow Flame on Rock Base (Unpainted, 14 Pieces)

Chibi Eyepatch Swordsman Resin Garage Kit – Giant Cleaver Blade, Skull Pile & Yellow Flame on Rock Base (Unpainted, 14 Pieces)

$75.00
KitFull kit, 14 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 14 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the wild, battle-hungry swordsman captain from a long-running anime about sword-wielding spirit warriors. He crouches low on a slab of gray rock, his right bare foot planted on a heap of skulls and his left back on the stone, leaning forward with a wide grin that shows both rows of teeth. His right hand rests on a bandage-wrapped hilt over his shoulder, and the huge cleaver-shaped blade rises above his head, with a wavy temper line, a squared khaki spine and a knotted green tassel. His left fist punches out through a torn sleeve. A riveted black eyepatch covers one eye, a long scar runs down the other side of his face, and his long black hair is swept back in thick spikes. He wears a black coat open to the waist over a sculpted chest, with a white collar band, sleeves torn into ragged edges, wide black trousers and a white sash tied in a bow. A tall yellow flame climbs up from the back corner of the base, behind his shoulder. A diamond plaque with a two-stroke mark is set into the front of the rock.

What's in the kit

  • 14 resin pieces in total.
  • Figure, 10 pieces: the head with hair and eyepatch, the open-coat torso, the wide trousers, two torn sleeves, two hands, two bare feet and the sash bow.
  • Sword, 2 pieces: the bandage-wrapped hilt and the giant cleaver blade with its tassel.
  • Base, 2 pieces: the rock with the skull pile and plaque, and the tall flame.
  • Tallest single piece: the flame, 178.7 mm (7.04 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Rock base: 114.2 × 117.1 mm (4.50 × 4.61 in) across, from the sculptor's file.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The flame is the tallest part and ends in thin forked tips. It anchors at the back corner of the rock; pin it, and dry-fit it together with the blade, since both sit behind his right shoulder.
  • The blade is a large flat piece held up by a thin hilt and an open hand. Pin the blade to the hilt.
  • The whole figure stands on two small bare feet. Pin both feet into the rock and up into the trousers.
  • The hair spikes, the torn sleeve and coat edges, the trailing bandage on the hilt and the small sash bow are all thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like