Sculptor's render of the painted design (kit ships unpainted): three-quarter front view of the horned look, holding the giant sword on the rock base in red flame swirls, with the torn black wing behind him

Chibi Swordsman Resin Garage Kit – Giant Black Sword, Red Flame Swirls & Burning Book on a Rock Base, Grinning and Horned Heads Both Included (Unpainted, 23 Pieces)

Full kit with both heads and the wing, 23 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): three-quarter front view of the horned look, holding the giant sword on the rock base in red flame swirls, with the torn black wing behind him
  • Sculptor's render of the painted design (kit ships unpainted): three-quarter front view of the horned look, holding the giant sword on the rock base in red flame swirls, with the torn black wing behind him
  • Sculptor's render (kit ships unpainted): the same view of the grinning look, with pale gray spiky hair and no wing or horns
  • Sculptor's render (kit ships unpainted): horned look from his left front, with the laced pouch, the full face of the blade and the burning book
  • Sculptor's render (kit ships unpainted): low front view of the grinning look with the burning book and a flame between his feet in the foreground
  • Sculptor's render (kit ships unpainted): high front view of the grinning look looking down on the cracked rock, dust clouds and flame swirls
  • Sculptor's render (kit ships unpainted): back view of the horned look with the wing joined at the shoulder, the red star on the back of the headband and dust clouds at the rear of the base
  • Sculptor's render (kit ships unpainted): horned look from his right side, showing the curled horn and the sword guard
  • Sculptor's render (kit ships unpainted): high rear view of the horned look with the two-tone hair, the horns and the textured wing
  • Sculptor's render of the painted design (kit ships unpainted): three-quarter front view of the horned look, holding the giant sword on the rock base in red flame swirls, with the torn black wing behind him
  • Sculptor's render (kit ships unpainted): the same view of the grinning look, with pale gray spiky hair and no wing or horns
  • Sculptor's render (kit ships unpainted): horned look from his left front, with the laced pouch, the full face of the blade and the burning book
  • Sculptor's render (kit ships unpainted): low front view of the grinning look with the burning book and a flame between his feet in the foreground
  • Sculptor's render (kit ships unpainted): high front view of the grinning look looking down on the cracked rock, dust clouds and flame swirls
  • Sculptor's render (kit ships unpainted): back view of the horned look with the wing joined at the shoulder, the red star on the back of the headband and dust clouds at the rear of the base
  • Sculptor's render (kit ships unpainted): horned look from his right side, showing the curled horn and the sword guard
  • Sculptor's render (kit ships unpainted): high rear view of the horned look with the two-tone hair, the horns and the textured wing
Chibi Swordsman Resin Garage Kit – Giant Black Sword, Red Flame Swirls & Burning Book on a Rock Base, Grinning and Horned Heads Both Included (Unpainted, 23 Pieces)

Chibi Swordsman Resin Garage Kit – Giant Black Sword, Red Flame Swirls & Burning Book on a Rock Base, Grinning and Horned Heads Both Included (Unpainted, 23 Pieces)

$65.00
KitFull kit with both heads and the wing, 23 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 23 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the sword-swinging hero from a fantasy anime about a kingdom of mages, standing square on a broken slab of ochre rock. He holds a huge sword low and out to his right, its broad flat blade black-edged around a violet panel with dark vein patterns, while his left hand hangs at his side in a fist. He wears a black headband with a gold horned-skull crest at the front, a short black capelet with a high collar and thick gold trim, a matching gold crest on the chest, a white short-sleeved tunic, a brown belt with a gold buckle and a laced pouch, navy knee-length shorts and short black boots. Three translucent red flame swirls curl up around his legs, a burning book stands at his feet and cream dust clouds puff out behind his boots. Both looks are in the box, so you can build either one and swap the heads as you like: the grinning head, with spiky pale gray hair, big green eyes and a wide toothy grin; and the horned head, with hair split black and gray down the middle, a curled black horn on one side, one red eye, dark markings on one cheek and a scowl, which goes with a torn black wing rising behind his shoulder. Each look has its own tunic and capelet, and both pairs are included.

What's in the kit

  • 23 resin pieces in total.
  • Figure and base, 12 pieces: the torso, the legs in shorts and boots, two hands, the sword, the rock base, three flame swirls, the burning book and two dust clouds.
  • Grinning look, 5 pieces: the head in three pieces (face, headband and spiky pale hair), plus the tunic and capelet without the wing mount.
  • Horned look, 6 pieces: the head in three pieces with the two-tone hair and horns, the tunic and capelet made to hold the wing, and the torn black wing.
  • The black right arm in the horned renders is paint. The thin black thorn tendrils shown on the sword and at the elbow are not among the kit's parts, so plan to paint or add them yourself.
  • Tallest single piece: the wing, 76.8 mm (3.02 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Rock base: 85.4 × 58.8 mm (3.36 × 2.31 in) across in the sculptor's file. The sword and flames reach past its edges.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The three flame swirls are thin curling ribbons with fine tips, and the smallest one between his feet is very slender. Support and remove carefully.
  • The sword is held out from one small hand with the blade past the edge of the base. Pin the hand and the sword.
  • The horned look's wing is a thin torn membrane with thorny branches, hung from the back of the capelet on a small contact area. Pin it.
  • The capelet is a thin cupped shell, and the hair spikes, tall hair strand, horns and sword-guard spike are small points. Use the tunic and capelet that match the head you build. Dry-fit the flames, clouds and book around the boots before gluing; no pegs show in the renders.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like