Sculptor's render of the painted design (kit ships unpainted): front view of the masked white-haired figure in shackles with four red scaled tentacles looping around him, on the checkered tile base

Chibi Masked White-Haired Antihero Resin Garage Kit – Red Scaled Tentacles, Shackles & Checkered Tile Base (Unpainted, 19 Pieces)

Full kit, 19 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the masked white-haired figure in shackles with four red scaled tentacles looping around him, on the checkered tile base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the masked white-haired figure in shackles with four red scaled tentacles looping around him, on the checkered tile base
  • Sculptor's render (kit ships unpainted): three-quarter view from his front left with the red eye above the black mask, the pliers and the bloodied hockey-style mask at his feet
  • Sculptor's render (kit ships unpainted): view from his right side showing the stitched panel over one eye and the tentacles fanning out behind him
  • Sculptor's render (kit ships unpainted): back view showing where the tentacles come from his lower back and circle him
  • Sculptor's render (kit ships unpainted): close-up of the face with the red ringed eye, white bangs and the toothed black mask
  • Sculptor's render (kit ships unpainted): close view of the shorts, the bare feet in shackles and the bloodied hockey-style mask on the tiles
  • Sculptor's render of the painted design (kit ships unpainted): front view of the masked white-haired figure in shackles with four red scaled tentacles looping around him, on the checkered tile base
  • Sculptor's render (kit ships unpainted): three-quarter view from his front left with the red eye above the black mask, the pliers and the bloodied hockey-style mask at his feet
  • Sculptor's render (kit ships unpainted): view from his right side showing the stitched panel over one eye and the tentacles fanning out behind him
  • Sculptor's render (kit ships unpainted): back view showing where the tentacles come from his lower back and circle him
  • Sculptor's render (kit ships unpainted): close-up of the face with the red ringed eye, white bangs and the toothed black mask
  • Sculptor's render (kit ships unpainted): close view of the shorts, the bare feet in shackles and the bloodied hockey-style mask on the tiles
Chibi Masked White-Haired Antihero Resin Garage Kit – Red Scaled Tentacles, Shackles & Checkered Tile Base (Unpainted, 19 Pieces)

Chibi Masked White-Haired Antihero Resin Garage Kit – Red Scaled Tentacles, Shackles & Checkered Tile Base (Unpainted, 19 Pieces)

$65.00
KitFull kit, 19 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 19 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the white-haired college student turned half-monster from a dark-fantasy horror anime. He stands with his feet apart and his head tipped down, looking out from under long white bangs, one hand raised at waist height with the thumb pressed to a curled finger and the other arm hanging loose. A glossy black leather mask covers his nose and jaw with a wide toothed grin, and a stitched, riveted panel covers one eye; the other eye is black with a bright red ringed iris. He wears a black short-sleeved top with a high rolled collar and frayed edges, knee-length gray shorts with torn hems, and goes barefoot, with heavy silver shackles and short broken chains on both wrists and ankles. Four long red tentacles covered in glossy scales come from his lower back and loop around him in wide arcs. The square base is a black plinth topped with checkered white and black tiles, with a bloodied white hockey-style mask, a blood pool, open pliers and red-and-black crawling bugs at his feet.

What's in the kit

  • 19 resin pieces in total.
  • Figure, 9 pieces: the torso, the shorts, two legs, two arms, the masked head and the hair in two pieces.
  • Tentacles, 9 pieces: the segments of the four red tentacles.
  • Base, 1 piece: the square checkered plinth with the mask, blood pool, pliers and bugs sculpted on.
  • Tallest single piece: a tentacle segment, 44.3 mm (1.74 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Square base: 69.8 × 69.8 mm (2.75 × 2.75 in) across in the sculptor's file.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Nine tentacle segments build four long arcs that all hang from one small area at the lower back. Pin every segment join and the joins at the back.
  • The legs are slender and take the leverage of the tentacles. Pin both feet into the base, and build the tentacles out after the figure is fixed down.
  • The fingers, the wrist and ankle chains, the frayed hems and the bugs on the base are fine detail.
  • The tentacles, top and blood read as high gloss; plan on mixing gloss and matte varnish.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like