Sculptor's render of the painted design (kit ships unpainted): front view of the chibi in a cream jacket and red tie holding a bone-handled scythe low, its shaft rising behind him, on a slate base with a skull and a black notebook

Chibi Anime Mastermind Resin Garage Kit – Bone-Handled Scythe, Cream Jacket & Red Tie, Black Notebook & Skull Slate Base (Unpainted, 9 Pieces)

Full kit, 9 pieces
$39.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the chibi in a cream jacket and red tie holding a bone-handled scythe low, its shaft rising behind him, on a slate base with a skull and a black notebook
  • Sculptor's render of the painted design (kit ships unpainted): front view of the chibi in a cream jacket and red tie holding a bone-handled scythe low, its shaft rising behind him, on a slate base with a skull and a black notebook
  • Sculptor's render (kit ships unpainted): front view turned slightly to one side, the cracked scythe blade sweeping across the base
  • Sculptor's render (kit ships unpainted): three-quarter view with his hand held out, the notebook leaning on the rock beside the skull
  • Sculptor's render (kit ships unpainted): side view with the long scythe shaft curving up behind him
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the cord-wrapped shaft rising behind his head
  • Sculptor's render (kit ships unpainted): rear view of the hair and the shaft crossing his back
  • Sculptor's render (kit ships unpainted): close view of the face with brown eyes under a heavy fringe, white collar and red tie
  • Studio's photo of an unpainted gray test print of the same sculpt, front view
  • Sculptor's render of the painted design (kit ships unpainted): front view of the chibi in a cream jacket and red tie holding a bone-handled scythe low, its shaft rising behind him, on a slate base with a skull and a black notebook
  • Sculptor's render (kit ships unpainted): front view turned slightly to one side, the cracked scythe blade sweeping across the base
  • Sculptor's render (kit ships unpainted): three-quarter view with his hand held out, the notebook leaning on the rock beside the skull
  • Sculptor's render (kit ships unpainted): side view with the long scythe shaft curving up behind him
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the cord-wrapped shaft rising behind his head
  • Sculptor's render (kit ships unpainted): rear view of the hair and the shaft crossing his back
  • Sculptor's render (kit ships unpainted): close view of the face with brown eyes under a heavy fringe, white collar and red tie
  • Studio's photo of an unpainted gray test print of the same sculpt, front view
Chibi Anime Mastermind Resin Garage Kit – Bone-Handled Scythe, Cream Jacket & Red Tie, Black Notebook & Skull Slate Base (Unpainted, 9 Pieces)

Chibi Anime Mastermind Resin Garage Kit – Bone-Handled Scythe, Cream Jacket & Red Tie, Black Notebook & Skull Slate Base (Unpainted, 9 Pieces)

$39.00
KitFull kit, 9 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design, plus the studio's photos of its own unpainted test prints. Your kit arrives as 9 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the cool, brown-haired mastermind from a famous psychological-thriller anime. He steps forward on a slab of cracked slate with one knee bent, his left hand held out at chest height, palm up, and his right hand gripping the long shaft of a scythe that rises behind his back to a hooked tip above his head. The scythe's nicked and cracked crescent blade sweeps across the front of the base, bound to the shaft with straps and a grip of knuckled bones. He has a big round head with a golden-brown bob, a heavy fringe falling between narrowed brown eyes, and a flat, unbothered look. He wears an open cream jacket over a white shirt, a long red tie knotted loose, a black belt with a silver buckle, charcoal trousers and black shoes. The base is a black two-step plinth topped with cracked dark slate, with a tall broken slab behind him, a black notebook with white gothic lettering leaning against it, a scowling skull at his feet and two curved bone spikes rising from the rubble.

What's in the kit

  • 9 resin pieces in total.
  • Figure, 6 pieces: head, front hair piece, torso with the jacket, shirt and tie, left arm, right arm with the long scythe shaft, and legs.
  • Scythe blade, 1 piece: the blade with its bone grip.
  • Base, 2 pieces: the slate base with the skull and bone spikes, and the black notebook.
  • Studio size: 115 mm (4.53 in) tall, 80 mm (3.15 in) wide and 65 mm (2.56 in) deep (from Tanuki Figures' notes for this kit).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The right arm carries the whole scythe shaft, which is long and thin and runs up behind his back. Support-removal marks along it need gentle sanding, and it goes on after the torso.
  • The scythe blade joins the shaft below his hand. Dry-fit it so the blade sits across the front of the base before gluing.
  • The front hair piece fits into a socket on the forehead, and the joins use square pegs. The left hand's fingers and the blade's edge and point are thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like