Sculptor's render of the painted design (kit ships unpainted): front view with the creature companion: the six-winged angel warrior with a small winged creature perched on his navy helmet, holding a gold staff above a glowing blue tile base

Chibi Six-Winged Angel Warrior Resin Garage Kit – Riveted Helmet, Gold Staff, Glowing Hex Tile Base & Creature Companion, Both Helmets Included (Unpainted, 23 Pieces)

Full kit with both helmets and the creature companion, 23 pieces
$75.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view with the creature companion: the six-winged angel warrior with a small winged creature perched on his navy helmet, holding a gold staff above a glowing blue tile base
  • Sculptor's render of the painted design (kit ships unpainted): front view with the creature companion: the six-winged angel warrior with a small winged creature perched on his navy helmet, holding a gold staff above a glowing blue tile base
  • Sculptor's render (kit ships unpainted): front view with the plain helmet fitted, showing the silver-riveted cross band on the helmet and a raised gloved fist
  • Sculptor's render (kit ships unpainted): the figure with the creature companion against a painted cloudy sky with falling feathers (backdrop is render scenery)
  • Sculptor's render (kit ships unpainted): side view with the creature companion, showing the layered wings and the stepped blue cubes he stands on
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the creature companion, showing the backs of the wings, the long orange hair and the staff
  • Sculptor's render (kit ships unpainted): close-up of the boots with gold and brown studded straps over the glowing hexagon tiles and the gray base
  • Sculptor's render (kit ships unpainted): close-up of the companion creature gripping the top of the helmet, eyes wide and mouth open
  • Sculptor's render (kit ships unpainted): close-up of the helmeted face and white chest with the gold belt buckle and the blue sash
  • Sculptor's render (kit ships unpainted): close-up of the riveted helmet and the raised fist with studded finger plates
  • Sculptor's render (kit ships unpainted): back view of the helmet, the long orange hair and the layered wings, with the staff across his back
  • Sculptor's render of the painted design (kit ships unpainted): front view with the creature companion: the six-winged angel warrior with a small winged creature perched on his navy helmet, holding a gold staff above a glowing blue tile base
  • Sculptor's render (kit ships unpainted): front view with the plain helmet fitted, showing the silver-riveted cross band on the helmet and a raised gloved fist
  • Sculptor's render (kit ships unpainted): the figure with the creature companion against a painted cloudy sky with falling feathers (backdrop is render scenery)
  • Sculptor's render (kit ships unpainted): side view with the creature companion, showing the layered wings and the stepped blue cubes he stands on
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the creature companion, showing the backs of the wings, the long orange hair and the staff
  • Sculptor's render (kit ships unpainted): close-up of the boots with gold and brown studded straps over the glowing hexagon tiles and the gray base
  • Sculptor's render (kit ships unpainted): close-up of the companion creature gripping the top of the helmet, eyes wide and mouth open
  • Sculptor's render (kit ships unpainted): close-up of the helmeted face and white chest with the gold belt buckle and the blue sash
  • Sculptor's render (kit ships unpainted): close-up of the riveted helmet and the raised fist with studded finger plates
  • Sculptor's render (kit ships unpainted): back view of the helmet, the long orange hair and the layered wings, with the staff across his back
Chibi Six-Winged Angel Warrior Resin Garage Kit – Riveted Helmet, Gold Staff, Glowing Hex Tile Base & Creature Companion, Both Helmets Included (Unpainted, 23 Pieces)

Chibi Six-Winged Angel Warrior Resin Garage Kit – Riveted Helmet, Gold Staff, Glowing Hex Tile Base & Creature Companion, Both Helmets Included (Unpainted, 23 Pieces)

$75.00
KitFull kit with both helmets and the creature companion, 23 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 23 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the six-winged angel warrior from a classic monster-partner anime, caught mid-step above a cluster of glowing tiles. One boot is planted on a stack of stepped cubes and the other leg is bent and lifted. His left arm is raised with a gloved fist at shoulder height, and his right hand grips a long gold staff that crosses his body and runs behind his back. Six white wings of long layered feathers fan out behind him, and long orange hair sweeps out from under his helmet. The helmet is slate navy with a raised cross-shaped band, silver dome rivets and round silver ear discs, and it comes down over his eyes; a white chin guard frames a calm face. He wears a white bodysuit with sculpted muscle definition and four navy studs, a brown studded belt with a gold sun buckle, a royal-blue loincloth panel with a ragged end, blue bands carved with glyphs around one thigh, blue ribbons trailing from his wrist and knee, a gold studded bracelet and shoulder guard, a gold greave, studded leather wraps around one ankle, studded finger plates on his glove, and chunky white boots with gold wing ornaments. The staff is gold and studded, with ribbed grips and ball end caps. The base is a gray handheld-gadget shape with notched grip edges, round blue buttons and an engraved ring of glyphs, topped by translucent blue hexagon tiles and pixel-like cubes. Both helmets are in the box: the plain one with its full cross band and crown rivets, and one shaped to seat a small orange-and-cream flying creature with bat-like ear-wings and big blue eyes, which is included too and perches on top. Swap them as you like.

What's in the kit

  • 23 resin pieces in total.
  • Figure, 18 pieces: the lower face, the long hair, the torso with belt and right arm, the raised left arm, the right hand, the gold shoulder guard, two legs, the loincloth panel, a tiny gold fitting, six wings and the staff in two sections.
  • Helmets, 2 pieces: the plain helmet with its full cross band and crown rivets showing, and the helmet shaped to seat the creature. Both are in the box; swap them as you like.
  • Creature companion, 1 piece: the small winged creature that perches on the second helmet.
  • Base, 2 pieces: the gadget-shaped base and the glowing tile effect that sits on it.
  • The companion creature is 120.9 mm (4.76 in) across its spread ear-wings in the sculptor's file.
  • Base: 76.6 × 59.8 mm (3.02 × 2.35 in) across in the sculptor's file.
  • The sculptor doesn't publish an assembled height or scale, so I don't list one.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The six wings are separate thin feather pieces that layer on each side of the back. Dry-fit them before gluing; the numbered files don't say where each one goes.
  • The figure stands on a single boot on the tile effect, with the heavy helmet (and the creature, when you seat it) on top. Pin the standing leg into the tiles and the tiles into the base. Both helmets are in the box; fit the helmet without glue if you want to swap them.
  • The staff is a thin rod in two sections that passes through the right hand and behind the back. The creature's ear-wings are thin membranes.
  • There is a tiny gold fitting that is easy to lose, and the ribbons and loincloth have thin ragged ends.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like