Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the caped figure standing on the slain creature's head

Anime-Style Caped Rapier Duelist Resin Garage Kit – Crimson Cape, Long Pink Hair & Monster Head Base (Unpainted, 15 Pieces)

Full kit, 15 pieces
$112.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the caped figure standing on the slain creature's head
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the caped figure standing on the slain creature's head
  • Sculptor's render (kit ships unpainted): front view from her right, with the rapier seen along its length
  • Sculptor's render (kit ships unpainted): high-angle view of the figure and the top of the creature-head base
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the long hair falling down her back and the creature's open jaw
  • Sculptor's render (kit ships unpainted): rear view with the cape sweeping out and the cut neck of the creature on the base
  • Sculptor's render (kit ships unpainted): closer front view of the face, collar, gloves and rapier hilt
  • Sculptor's render (kit ships unpainted): low close-up of the upper figure with the crimson cape and tall collar
  • Sculptor's render (kit ships unpainted): unpainted gray view of the full sculpt and base from the front
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the caped figure standing on the slain creature's head
  • Sculptor's render (kit ships unpainted): front view from her right, with the rapier seen along its length
  • Sculptor's render (kit ships unpainted): high-angle view of the figure and the top of the creature-head base
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the long hair falling down her back and the creature's open jaw
  • Sculptor's render (kit ships unpainted): rear view with the cape sweeping out and the cut neck of the creature on the base
  • Sculptor's render (kit ships unpainted): closer front view of the face, collar, gloves and rapier hilt
  • Sculptor's render (kit ships unpainted): low close-up of the upper figure with the crimson cape and tall collar
  • Sculptor's render (kit ships unpainted): unpainted gray view of the full sculpt and base from the front
Anime-Style Caped Rapier Duelist Resin Garage Kit – Crimson Cape, Long Pink Hair & Monster Head Base (Unpainted, 15 Pieces)

Anime-Style Caped Rapier Duelist Resin Garage Kit – Crimson Cape, Long Pink Hair & Monster Head Base (Unpainted, 15 Pieces)

$112.00
KitFull kit, 15 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 15 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the caped swordswoman from an anime-style action game series. She stands over a slain creature with one thigh-high boot planted on its head and the other leg reaching down to the rock behind it, a rapier held low in her right hand and a gloved finger raised to her lips. She wears a crimson cape with a tall collar and white piping, a glossy fitted dress with white comet-shaped panels and a high slit, two-tone opera gloves, and stiletto boots with blade-shaped ankle guards. Her very long pale pink hair streams out to one side. The base is the creature's severed head on a bed of gray rock, with an open toothed jaw, a clawed limb curling over the top and painted blood running down to the stones.

What's in the kit

  • 15 resin pieces in total.
  • Figure, 9 pieces: head, front hair, the long hair in two pieces, torso, two arms and two legs.
  • Clothing, 3 pieces: the skirt and the cape in two pieces.
  • Sword, 1 piece: the rapier.
  • Base, 2 pieces: the creature head and rock in two halves.
  • Tallest single piece: one of the two long hair pieces, 175.7 mm (6.92 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The figure stands on two stiletto boots, one on the creature's head and one on the rock. Pin both feet into the base, and seat the legs before the hair and cape go on.
  • The base comes in two large halves. The seam runs through sculpted hide and blood, so expect to fill and re-texture it.
  • The long hair is heavy and hangs out to one side. Pin it.
  • The cape comes in two pieces that join across its textured outer face, and the rapier blade is long and thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like