Sculptor's render of the painted design (kit ships unpainted): front full view of the white-haired maid holding a sword across her chest, on the round carved base with the red gem

Anime Dark Elf Maid Resin Garage Kit – Twin Swords, White Apron & Carved Vine Base (Unpainted, 9 Pieces)

Full kit, 9 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front full view of the white-haired maid holding a sword across her chest, on the round carved base with the red gem
  • Sculptor's render of the painted design (kit ships unpainted): front full view of the white-haired maid holding a sword across her chest, on the round carved base with the red gem
  • Sculptor's render (kit ships unpainted): three-quarter view with the long blade angled across the apron and out past her hip
  • Sculptor's render (kit ships unpainted): high three-quarter view showing the carved stone floor of the base
  • Sculptor's render (kit ships unpainted): side view in profile, one sword held in front and the other trailing behind her hip
  • Sculptor's render (kit ships unpainted): rear view with the long white hair, the bow tails and the trailing sword
  • Sculptor's render (kit ships unpainted): low tilted view with the vines, planks and red gem of the base in the foreground
  • Sculptor's render (kit ships unpainted): close-up of the face, collar and striped tie, with the gloved hand on the wooden sword grip
  • Sculptor's render of the painted design (kit ships unpainted): front full view of the white-haired maid holding a sword across her chest, on the round carved base with the red gem
  • Sculptor's render (kit ships unpainted): three-quarter view with the long blade angled across the apron and out past her hip
  • Sculptor's render (kit ships unpainted): high three-quarter view showing the carved stone floor of the base
  • Sculptor's render (kit ships unpainted): side view in profile, one sword held in front and the other trailing behind her hip
  • Sculptor's render (kit ships unpainted): rear view with the long white hair, the bow tails and the trailing sword
  • Sculptor's render (kit ships unpainted): low tilted view with the vines, planks and red gem of the base in the foreground
  • Sculptor's render (kit ships unpainted): close-up of the face, collar and striped tie, with the gloved hand on the wooden sword grip
Anime Dark Elf Maid Resin Garage Kit – Twin Swords, White Apron & Carved Vine Base (Unpainted, 9 Pieces)

Anime Dark Elf Maid Resin Garage Kit – Twin Swords, White Apron & Carved Vine Base (Unpainted, 9 Pieces)

$97.00
KitFull kit, 9 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 9 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the white-haired dark elf maid from a recent fantasy adventure anime. She stands mid-step in a still guard stance, one white-gloved hand holding a sword point-down across her chest and the other holding a second sword low at her hip with the blade trailing out behind her. She has long white hair falling to below her waist with a spiky fringe, pointed ears and red eyes. She wears a long fitted black dress with puffed, ruffled sleeves, a charcoal bodice with a high buttoned collar and a striped tie, a white apron with a laced bib and a pleated ruffle, a large black bow at the back, elbow-length white gloves and low-heeled loafers. The swords are plain curved blades on squared wooden grips. The base is a round two-tier plinth with a carved stone tile floor, wooden plank and stone post sides wound with leafy vines, and a red diamond-shaped gem at the front.

What's in the kit

  • 9 resin pieces in total.
  • Figure, 6 pieces: head with the long hair, a small head piece, torso, two arms (the swords are part of the arm pieces) and both legs in a single piece.
  • Dress, 2 pieces: the long dress in two full-length pieces.
  • Base, 1 piece: the round carved plinth.
  • Studio scale: 1:6 (from 3DMoon's store page for this model).
  • Tallest single piece: the legs, 184.0 mm (7.24 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Base: 121.9 × 122.5 mm (4.80 × 4.82 in) across in the sculptor's file. The trailing sword reaches out past its edge.
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The legs are a single piece with both shoes and carry the whole figure. Pin both shoes into the base.
  • The dress comes in two full-length pieces that close around the legs, and the black skirt is smooth from waist to hem. Dry-fit both pieces before glue and expect to fill a seam.
  • Each arm holds a long, thin sword out from the body. Pin both arms at the shoulder and fit them last, because the blades are the easiest parts to break.
  • The spiky fringe, the apron ruffle and the vine tips on the base are thin and delicate.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like