Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the elf mage mid-spell inside glowing wind spirals on a round stone base

Anime Elf Mage Resin Garage Kit – Crescent Staff, Glowing Wind Spirals & Flower Rock Base (Unpainted, 30 Pieces)

Full kit, 30 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the elf mage mid-spell inside glowing wind spirals on a round stone base
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the elf mage mid-spell inside glowing wind spirals on a round stone base
  • Sculptor's render (kit ships unpainted): three-quarter view with the crescent staff head in the foreground
  • Sculptor's render (kit ships unpainted): side view with the raised rear leg and the spirals wrapping her legs
  • Sculptor's render (kit ships unpainted): rear view showing the capelet, twin tails and the brick wall on the base
  • Sculptor's render (kit ships unpainted): tilted view of the pedestal with its gems and sword, in cooler studio lighting
  • Sculptor's render (kit ships unpainted): high front view showing the top of the floating disc and the flowers on the base
  • Sculptor's render (kit ships unpainted): close-up of the face and tunic with the disc in the foreground
  • Sculptor's render (kit ships unpainted): head-and-shoulders close-up with green eyes and a red earring
  • Sculptor's render (kit ships unpainted): side close-up of the head, capelet and staff hand
  • Sculptor's render (kit ships unpainted): close-up of the face and upper body in the older render lighting
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the elf mage mid-spell inside glowing wind spirals on a round stone base
  • Sculptor's render (kit ships unpainted): three-quarter view with the crescent staff head in the foreground
  • Sculptor's render (kit ships unpainted): side view with the raised rear leg and the spirals wrapping her legs
  • Sculptor's render (kit ships unpainted): rear view showing the capelet, twin tails and the brick wall on the base
  • Sculptor's render (kit ships unpainted): tilted view of the pedestal with its gems and sword, in cooler studio lighting
  • Sculptor's render (kit ships unpainted): high front view showing the top of the floating disc and the flowers on the base
  • Sculptor's render (kit ships unpainted): close-up of the face and tunic with the disc in the foreground
  • Sculptor's render (kit ships unpainted): head-and-shoulders close-up with green eyes and a red earring
  • Sculptor's render (kit ships unpainted): side close-up of the head, capelet and staff hand
  • Sculptor's render (kit ships unpainted): close-up of the face and upper body in the older render lighting
Anime Elf Mage Resin Garage Kit – Crescent Staff, Glowing Wind Spirals & Flower Rock Base (Unpainted, 30 Pieces)

Anime Elf Mage Resin Garage Kit – Crescent Staff, Glowing Wind Spirals & Flower Rock Base (Unpainted, 30 Pieces)

$97.00
KitFull kit, 30 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 30 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the silver-haired elf mage from a popular fantasy anime, caught mid-spell. She balances on one boot on a broken rock with the other leg lifted behind her. One hand holds a staff with a red-jeweled crescent head low at her side, and a glowing disc with a black center floats over the open palm of the other. Three glowing wind spirals wind up around her legs, carrying chunks of rock. She wears a white capelet with gold trim over a belted white tunic, a short skirt, dark tights and brown boots, with long pointed ears and high twin tails blowing out to the sides. The base is a round stone pedestal with a gold band and inset gems and a small sword planted at the front, topped with a rock mound, grass, blue flowers and a low brick wall.

What's in the kit

  • 30 resin pieces in total.
  • Figure, 11 pieces: head, front fringe, two twin tails, torso, two arms, the open hand, legs and two boots.
  • Clothing, 5 pieces: the capelet in two halves, the skirt in two halves and the ribbon with its crystal end.
  • Staff and spell, 3 pieces: the staff shaft, the crescent staff head and the floating disc.
  • Wind spirals, 8 pieces: three spirals in sections.
  • Base, 3 pieces: the round pedestal, the rock mound with grass, flowers and brick wall, and the small sword.
  • Tallest single piece: the legs, 107.4 mm (4.23 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Base: the round pedestal is 116.8 × 116.4 mm (4.60 × 4.58 in) in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • She stands on a single boot, so the whole figure hangs off one contact point. Pin it into the rock.
  • The three wind spirals come in 8 sections that pass close to her legs and skirt. Dry-fit the spirals and the figure together and work out the gluing order first.
  • The ribbon, the staff shaft, the sword and the wind sections are thin. Clip supports rather than snapping them off.
  • The capelet and skirt halves join on smooth white cloth. Fill and sand those seams.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like