Anime Fox-Eared Shrine Maiden Resin Garage Kit – Bamboo Broom, Fox Tail & Plank Floor Base (Unpainted, 27 Pieces)
Anime Fox-Eared Shrine Maiden Resin Garage Kit – Bamboo Broom, Fox Tail & Plank Floor Base (Unpainted, 27 Pieces)
Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works
IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.
The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 27 separate pieces of plain, single-color resin. It is:
- Unassembled: you glue the pieces together yourself.
- Unprimed: it needs primer before paint.
- Unsanded: seams and surfaces need sanding.
- Unpainted: all painting is up to you.
Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.
This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.
A fan-art statue of the fox spirit from a cozy slice-of-life anime, caught in the middle of sweeping. She stands on a patch of wooden floorboards in raised wooden sandals, holding a bamboo broom across her body with both hands, the straw head splayed on the boards, and grins at the viewer with two small fangs showing. Tall fox ears rise out of her short golden hair, which carries a red flower ornament with ribbon tails, and a big gold-and-orange fox tail with a white tip sweeps out to one side. She wears shrine-maiden clothes: a white top with very wide sleeves edged in red dashes and tied with small red bows, black-and-red laced bands at the shoulders, a long gray apron with a bib and dark straps, a red waist bow with long tails, full red pleated trousers, white split-toe socks and wooden sandals with red thongs. The base is a square of staggered wooden planks with sculpted grain and cracks.
What's in the kit
- 27 resin pieces in total.
- Figure, 14 pieces: head, front hair, back hair, two fox ears, torso, hips, two legs, two feet in split-toe socks, two forearms with hands, and the tail.
- Clothing, 9 pieces: the red pleated trousers, two wide sleeves, the apron bib with its straps, the apron skirt, the waist bow, two small sleeve bows and the flower hair ornament.
- Accessories, 3 pieces: the bamboo broom and two wooden sandals.
- Base, 1 piece: the plank floor.
- Tallest single piece: the bamboo broom, 142.4 mm (5.61 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
- Plank floor base: 87.6 × 87.8 mm (3.45 × 3.46 in) across in the sculptor's file.
- Scale: about 1:10 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:10 figures, and scale can differ from one creator to another.
About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
Skill level: advanced
- The broom passes through both hands. Dry-fit the broom through the hands and onto the base before you glue either forearm to the body.
- The legs sit inside the pleated trousers, with only the feet showing. Dry-fit the legs, trousers and sandals on the base before any glue, and pin both sandals into the planks.
- The tail is a heavy part that hangs off her back. Glue it with the figure lying down, and pin it.
- The two sleeve bows and the flower hair ornament are tiny. Fit them last, with tweezers.
You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.
How ordering works
Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.
Shipping and returns
- Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
- International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
- 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.
Sculptor credit and license
This sculpt is by Moon Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Moon Figures' commercial tier on Patreon. Please support the artist:
- Patreon: patreon.com/MoonFigures
- Buy the 3D files: Cults3D · Gumroad
Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.