Studio scale and parts sheet (kit ships unpainted): the small statue in front of the large one is the miniature (this listing), 88 mm tall, 65 mm wide and 69 mm long; its parts are shown bottom center under 'Miniature scale'

Anime Warrior Monk Resin Garage Kit – Spiked Flail on a Chain, Raised Hand Axe & Thorn Vine Rubble Base (Unpainted, Miniature, 8 Pieces)

Miniature, 8 pieces
$39.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the small statue in front of the large one is the miniature (this listing), 88 mm tall, 65 mm wide and 69 mm long; its parts are shown bottom center under 'Miniature scale'
  • Studio scale and parts sheet (kit ships unpainted): the small statue in front of the large one is the miniature (this listing), 88 mm tall, 65 mm wide and 69 mm long; its parts are shown bottom center under 'Miniature scale'
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the warrior monk with his axe raised and prayer beads in his open hand, the chain and spiked ball looping around him above the thorn base; the miniature is the same sculpt at 88 mm tall
  • Sculptor's render (kit ships unpainted): view from the open-hand side with the sandal on the roof tiles and the crimson thorns; the miniature is the same sculpt at 88 mm tall
  • Sculptor's render (kit ships unpainted): view from the flail side, the spiked ball in front and white slash effects rising from the base; the miniature is the same sculpt at 88 mm tall
  • Studio scale and parts sheet (kit ships unpainted): the small statue in front of the large one is the miniature (this listing), 88 mm tall, 65 mm wide and 69 mm long; its parts are shown bottom center under 'Miniature scale'
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the warrior monk with his axe raised and prayer beads in his open hand, the chain and spiked ball looping around him above the thorn base; the miniature is the same sculpt at 88 mm tall
  • Sculptor's render (kit ships unpainted): view from the open-hand side with the sandal on the roof tiles and the crimson thorns; the miniature is the same sculpt at 88 mm tall
  • Sculptor's render (kit ships unpainted): view from the flail side, the spiked ball in front and white slash effects rising from the base; the miniature is the same sculpt at 88 mm tall
Anime Warrior Monk Resin Garage Kit – Spiked Flail on a Chain, Raised Hand Axe & Thorn Vine Rubble Base (Unpainted, Miniature, 8 Pieces)

Anime Warrior Monk Resin Garage Kit – Spiked Flail on a Chain, Raised Hand Axe & Thorn Vine Rubble Base (Unpainted, Miniature, 8 Pieces)

$39.00
KitMiniature, 8 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 8 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the towering, blind warrior monk from a hugely popular demon-hunting anime, caught mid-swing. He braces wide on a wrecked rooftop, one foot forward on a run of broken ridge tiles and the other leg bent back, his torso twisted toward the viewer. One arm is raised overhead gripping a short-hafted hand axe with an engraved blade; the other is thrust forward, palm open and fingers spread, with two loops of red prayer beads hanging from the hand. A heavy chain runs from the axe around behind him and across the front to a spiked iron ball, so the flail circles the whole figure. His spiky black hair is swept back, a scar crosses his forehead, his eyes are blank white and his teeth are bared. He wears a dark uniform with a woven texture and a single gold button, a white belt, wide trousers gathered into white leg wraps and thong sandals, under an olive-green haori with a white lining, white edging and square patches on the sleeves. The base is brown rock rubble with gray roof tiles and round tile caps, a splintered timber beam, crimson thorn vines that curl up through the scene and white slash effects that rise in ragged sweeps along the arc of the chain. This listing is the miniature of the whole scene, 88 mm tall on the studio's scale sheet, in 8 pieces. The 1:10 scale statue and the bust are sold as separate listings.

What's in the kit

  • 8 resin pieces in total.
  • Figure, 5 pieces: head, torso with one arm and the beads, the other arm, legs, and the haori.
  • Flail, 1 piece: the flail and chain as a single piece.
  • Effects, 1 piece: the slash effects as a single piece.
  • Base, 1 piece: the base with its thorns.
  • Miniature: 88 mm (3.46 in) tall, 65 mm (2.56 in) wide and 69 mm (2.72 in) long (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The flail and chain come as one long, thin piece that loops around the figure. Dry-fit it with the figure on the base before gluing, and handle it by the ball.
  • The slash effects and the thorns on the base are thin and sharp at this size. Remove supports from them slowly.
  • The haori is a separate piece over the torso. Dry-fit it so the sleeves line up with the arms before gluing.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like