Sculptor's render of the painted design (kit ships unpainted): full front view of the gunman leaping between two broken concrete pillars, pistol firing, above the rubble and the weathered sign on a round drum base

Anime Leaping Gunman Resin Garage Kit – Blue Suit, Broken Concrete Pillars & Rubble Sign Diorama (Unpainted, 28 Pieces)

Full kit, 28 pieces
$137.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the gunman leaping between two broken concrete pillars, pistol firing, above the rubble and the weathered sign on a round drum base
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the gunman leaping between two broken concrete pillars, pistol firing, above the rubble and the weathered sign on a round drum base
  • Sculptor's render (kit ships unpainted): low three-quarter view from the left, showing the cracked face of the near pillar and the raised pistol with its muzzle flash
  • Sculptor's render (kit ships unpainted): rear view of the two pillars with bent rebar, a red and blue cable, the rubble pile and the cabled drum base
  • Sculptor's render (kit ships unpainted): close-up of the face with the cigarette, the folded-out yellow collar, the loose dark tie and the blue jacket, pistol held toward the camera
  • Sculptor's render (kit ships unpainted): close-up of the base with the weathered sign plate, rubble, smoke wisps, rusted pipes and the drum's riveted panels and cables
  • Sculptor's render (kit ships unpainted): close-up of the hand gripping the black pistol, blue jacket cuff behind
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the gunman leaping between two broken concrete pillars, pistol firing, above the rubble and the weathered sign on a round drum base
  • Sculptor's render (kit ships unpainted): low three-quarter view from the left, showing the cracked face of the near pillar and the raised pistol with its muzzle flash
  • Sculptor's render (kit ships unpainted): rear view of the two pillars with bent rebar, a red and blue cable, the rubble pile and the cabled drum base
  • Sculptor's render (kit ships unpainted): close-up of the face with the cigarette, the folded-out yellow collar, the loose dark tie and the blue jacket, pistol held toward the camera
  • Sculptor's render (kit ships unpainted): close-up of the base with the weathered sign plate, rubble, smoke wisps, rusted pipes and the drum's riveted panels and cables
  • Sculptor's render (kit ships unpainted): close-up of the hand gripping the black pistol, blue jacket cuff behind
Anime Leaping Gunman Resin Garage Kit – Blue Suit, Broken Concrete Pillars & Rubble Sign Diorama (Unpainted, 28 Pieces)

Anime Leaping Gunman Resin Garage Kit – Blue Suit, Broken Concrete Pillars & Rubble Sign Diorama (Unpainted, 28 Pieces)

$137.00
KitFull kit, 28 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 28 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the lanky, shaggy-haired bounty hunter from a classic space-western anime series. He is caught mid-leap between two broken concrete pillars, his right arm thrown out to the side with the pistol firing and the muzzle flash modeled in, his left arm swept back with the hand open, one shoe planted on the rubble and the other leg kicked up behind him. A lit cigarette hangs from the corner of his half-smile. He wears a blue suit with the jacket flaring open, a yellow shirt with its big pointed collar folded out over the lapels, a loose dark tie and two bar clasps in place of buttons. The base is a full diorama: a round riveted drum with orange-red cables looped around its band, a pile of gray rubble, two cracked pillars leaning outward in a V with bent rebar bursting from their tops and a red and blue cable draped down one of them, two rusted girders, four rusted pipes, four wisps of pale smoke, and a weathered metal sign with raised red lettering propped at the front.

What's in the kit

  • 28 resin pieces in total.
  • Figure, 10 pieces: head, torso, legs, two arms, the open left hand, the right hand with the pistol and muzzle flash, two shoes and the cigarette.
  • Base, 18 pieces: the round drum base, the sign plate, the two broken pillars in two halves each, the rubble pile in two halves, two girders, four pipes and four smoke wisps.
  • Studio size: 349.71 mm (13.77 in) tall, 251.40 mm (9.90 in) wide and 236.05 mm (9.29 in) deep, assembled (from the studio's scale sheet).
  • Drum base: 180.7 mm (7.11 in) across in the sculptor's file. The rubble pile on top overhangs it a little.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • He balances on one foot, and the planted shoe is a separate part. Pin through the ankle into the legs and through the sole into the rubble.
  • Each pillar comes in two halves, and the pillars lean outward. Pin both joins and let them cure before the figure goes on.
  • Build the base in order: drum, the two rubble halves, the pillars, then the figure, then the smoke wisps and the sign plate last.
  • Thin parts: the smoke wisps, the rebar at the pillar tops, the spread fingers of the open hand, two of the pipes and the tiny cigarette.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Lion Realm Studio. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like