Sculptor's render of the painted design (kit ships unpainted): front three-quarter full view of the hacker with one arm raised over her head and one boot up on a block, between glowing screens on the dark tech base

Anime Hacker Woman Resin Garage Kit – Pastel-Tipped Bob, Off-Shoulder Cropped Jacket & Glowing Screen Tech Base (Unpainted, 14 Pieces)

Full kit, 14 pieces
$129.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter full view of the hacker with one arm raised over her head and one boot up on a block, between glowing screens on the dark tech base
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter full view of the hacker with one arm raised over her head and one boot up on a block, between glowing screens on the dark tech base
  • Sculptor's render (kit ships unpainted): straight front view showing the bodysuit's red accents, the belt with the hip device and the knee-high boots
  • Sculptor's render (kit ships unpainted): side three-quarter view of the raised knee, the cropped jacket slipping off her shoulders and the depth of the base
  • Sculptor's render (kit ships unpainted): low front view with the street screen and the monitor frame on either side of her
  • Sculptor's render (kit ships unpainted): close-up of the face and upper body, with the pastel-tipped silver bob, the red markings under the eyes and the hand with two fingers raised
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the outstretched arm and the lit backs of the screens
  • Sculptor's render (kit ships unpainted): back view of the cropped jacket, the silver bob and the lit panels behind the screens
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter full view of the hacker with one arm raised over her head and one boot up on a block, between glowing screens on the dark tech base
  • Sculptor's render (kit ships unpainted): straight front view showing the bodysuit's red accents, the belt with the hip device and the knee-high boots
  • Sculptor's render (kit ships unpainted): side three-quarter view of the raised knee, the cropped jacket slipping off her shoulders and the depth of the base
  • Sculptor's render (kit ships unpainted): low front view with the street screen and the monitor frame on either side of her
  • Sculptor's render (kit ships unpainted): close-up of the face and upper body, with the pastel-tipped silver bob, the red markings under the eyes and the hand with two fingers raised
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the outstretched arm and the lit backs of the screens
  • Sculptor's render (kit ships unpainted): back view of the cropped jacket, the silver bob and the lit panels behind the screens
Anime Hacker Woman Resin Garage Kit – Pastel-Tipped Bob, Off-Shoulder Cropped Jacket & Glowing Screen Tech Base (Unpainted, 14 Pieces)

Anime Hacker Woman Resin Garage Kit – Pastel-Tipped Bob, Off-Shoulder Cropped Jacket & Glowing Screen Tech Base (Unpainted, 14 Pieces)

$129.00
KitFull kit, 14 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 14 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the quiet hacker from a sci-fi anime about mercenaries in a neon-lit future city. She stands on one straight leg with the other knee raised and its boot planted on a ribbed block, one arm raised and bent over her head with the hand open, and the other hand held out in front of her with two fingers raised, her head tipped toward the raised arm with a small, knowing half-smile. She has a blunt silver-lavender bob with soft cyan, yellow and pink running into the ends and one longer lock by her chin, pale lilac eyes and red markings beneath them. She wears a glossy black high-collared bodysuit with thin red lines and a small silver diamond clip, a cropped lavender-white jacket with long puffed sleeves worn slipped off the shoulders, open pale shorts, a black belt with a small three-light device at the hip, charcoal-grey leggings and glossy black knee-high boots with a red line and a small light. The base is a stepped gunmetal tech plinth with vents, cable runs, a glowing strip in the deck and amber corner lights, with a tall screen on one side and a frame of monitors on the other.

What's in the kit

  • 14 resin pieces in total.
  • Figure, 9 pieces: head with the bob, a separate front hair lock, torso in the bodysuit and cropped jacket, two arms in their puffed sleeves, two hands, and two legs with the boots.
  • Hip device, 1 piece.
  • Base, 4 pieces: the tech plinth deck, the ribbed block and the screens.
  • Studio scale: 1:6 (from 3DMoon's store page for this model).
  • Tallest single piece: the standing leg, 190.5 mm (7.50 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Plinth deck: 147.8 × 131.1 mm (5.82 × 5.16 in) across in the sculptor's file.
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The standing leg is a single long piece that carries the torso, head and arms. Pin its boot into the deck and the leg into the torso.
  • The raised boot lands on the ribbed block. Glue the block to the deck first, then dry-fit both boots before any glue goes on the figure.
  • Both arms reach away from the body, and the hands have thin spread fingers. Pin the arms at the shoulders.
  • The screen frames are thin panels, and the front hair lock and the hip device are small parts.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like