Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 statue with the studio's sizes for each version (miniature 98 mm tall), and the parts of each version laid out, the miniature's in the bottom middle

Anime Pink-Braided Swordswoman Resin Garage Kit – Ribbon-Thin Whip Sword, Three Wooden Dragon Heads & Rock Base (Unpainted, Miniature, 12 Pieces)

Miniature, 12 pieces
$39.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 statue with the studio's sizes for each version (miniature 98 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 statue with the studio's sizes for each version (miniature 98 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Sculptor's render (kit ships unpainted): the painted design, front view of the pink-braided swordswoman swinging the ribbon-thin blade overhead among three wooden dragon heads; the miniature is the same sculpt at 98 mm tall, in 12 pieces
  • Sculptor's render (kit ships unpainted): painted three-quarter view, the blade curling over her head; the miniature is the same sculpt at 98 mm tall, in 12 pieces
  • Sculptor's render (kit ships unpainted): painted rear view of the braids, the white coat and the tall wooden dragon; the miniature is the same sculpt at 98 mm tall, in 12 pieces
  • Studio scale and parts sheet (kit ships unpainted): the miniature shown in front of the 1:10 statue with the studio's sizes for each version (miniature 98 mm tall), and the parts of each version laid out, the miniature's in the bottom middle
  • Sculptor's render (kit ships unpainted): the painted design, front view of the pink-braided swordswoman swinging the ribbon-thin blade overhead among three wooden dragon heads; the miniature is the same sculpt at 98 mm tall, in 12 pieces
  • Sculptor's render (kit ships unpainted): painted three-quarter view, the blade curling over her head; the miniature is the same sculpt at 98 mm tall, in 12 pieces
  • Sculptor's render (kit ships unpainted): painted rear view of the braids, the white coat and the tall wooden dragon; the miniature is the same sculpt at 98 mm tall, in 12 pieces
Anime Pink-Braided Swordswoman Resin Garage Kit – Ribbon-Thin Whip Sword, Three Wooden Dragon Heads & Rock Base (Unpainted, Miniature, 12 Pieces)

Anime Pink-Braided Swordswoman Resin Garage Kit – Ribbon-Thin Whip Sword, Three Wooden Dragon Heads & Rock Base (Unpainted, Miniature, 12 Pieces)

$39.00
KitMiniature, 12 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 12 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

The miniature version of a fan-art statue of the cheerful swordswoman with long pink braids tipped in green, from a hugely popular demon-hunting anime: the same sculpt as the full statue, made smaller and in 12 pieces. Both hands grip the sword's hilt above her head, her right foot is planted on the rocks and her left leg is kicked up behind her, and she smiles straight at the viewer with wide green eyes. The blade is thin and flexible like a ribbon: it whips out to one side, loops over her head and wraps back around the whole scene. The hilt is wrapped in green with a pink pattern and a four-lobed yellow guard. She wears a long white coat with a woven texture and wide sleeves over a black uniform jacket with gold buttons, open at the front, a white belt, a short black pleated skirt, striped green thigh-high socks with a navy band, and white sandals with pink straps. A pale sheath hangs at her hip. Around her rise three bark-textured wooden dragon heads with knot eyes and jaws of overlapping plates, with pink thorns bursting from them, on a slab of gray rock with moss, earth and broken branches, and two pink crescent slashes sweep across the ground. The studio's scale sheet gives the miniature as 98 mm tall. The full 1:10 scale statue is sold as a separate listing.

What's in the kit

  • 12 resin pieces in total.
  • Figure, 4 pieces: head with the hair, torso with one arm, the other arm with the hands and hilt, and the legs with the skirt.
  • Sword, 1 piece: the ribbon-thin blade.
  • Wooden dragons, 5 pieces: the three dragons in five sections.
  • Base, 2 pieces: the rock base and the crescent slashes.
  • Miniature: 98 mm (3.86 in) tall, 87 × 87 mm (3.43 × 3.43 in) footprint (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The wooden dragons (five sections) and the rock base set the whole composition. Build and dry-fit them first, then check where her planted foot lands.
  • The blade is a single very thin ribbon at this size. Glue it last and handle it gently; it is the most fragile part of the kit.
  • Thin parts: the braid tips, the pink thorns on the dragons and the crescent slashes.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like