Sculptor's render of the painted design (kit ships unpainted): full front view of the armored figure with the round-eyed face, one arm folded across her body and her long hair blown to one side, on the broken brick paving base

Anime Pointed-Ear Demon Noble Resin Garage Kit – Both Outfits Bundle: Armored Figure with Two Faces & Plain Black Bodysuit Figure, Each on a Brick Paving Base (Unpainted, 26 Pieces)

Both outfits bundle, 26 pieces
$131.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the armored figure with the round-eyed face, one arm folded across her body and her long hair blown to one side, on the broken brick paving base
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the armored figure with the round-eyed face, one arm folded across her body and her long hair blown to one side, on the broken brick paving base
  • Sculptor's render (kit ships unpainted): full three-quarter view of the armored figure from her right, showing the hip and leg armor and the cloth panel at the waist
  • Sculptor's render (kit ships unpainted): full three-quarter view of the armored figure from her left, the clawed gauntlets and spiked greave cuffs on the paving
  • Sculptor's render (kit ships unpainted): rear view of the full figure with the very long hair falling past the hips and the armored legs below
  • Sculptor's render (kit ships unpainted): full front view of the armored figure with the fanged face, dark winged liner and red marks under the eyes
  • Sculptor's render (kit ships unpainted): full three-quarter view of the armored figure with the fanged face, hair streaming out to the side
  • Sculptor's render (kit ships unpainted): full three-quarter view of the plain bodysuit figure, arms folded, with no armor plates
  • Sculptor's render (kit ships unpainted): full three-quarter view of the plain bodysuit figure from her other side, the long hair swept back over the paving
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the armored figure with the round-eyed face, one arm folded across her body and her long hair blown to one side, on the broken brick paving base
  • Sculptor's render (kit ships unpainted): full three-quarter view of the armored figure from her right, showing the hip and leg armor and the cloth panel at the waist
  • Sculptor's render (kit ships unpainted): full three-quarter view of the armored figure from her left, the clawed gauntlets and spiked greave cuffs on the paving
  • Sculptor's render (kit ships unpainted): rear view of the full figure with the very long hair falling past the hips and the armored legs below
  • Sculptor's render (kit ships unpainted): full front view of the armored figure with the fanged face, dark winged liner and red marks under the eyes
  • Sculptor's render (kit ships unpainted): full three-quarter view of the armored figure with the fanged face, hair streaming out to the side
  • Sculptor's render (kit ships unpainted): full three-quarter view of the plain bodysuit figure, arms folded, with no armor plates
  • Sculptor's render (kit ships unpainted): full three-quarter view of the plain bodysuit figure from her other side, the long hair swept back over the paving
Anime Pointed-Ear Demon Noble Resin Garage Kit – Both Outfits Bundle: Armored Figure with Two Faces & Plain Black Bodysuit Figure, Each on a Brick Paving Base (Unpainted, 26 Pieces)

Anime Pointed-Ear Demon Noble Resin Garage Kit – Both Outfits Bundle: Armored Figure with Two Faces & Plain Black Bodysuit Figure, Each on a Brick Paving Base (Unpainted, 26 Pieces)

$131.00
KitBoth outfits bundle, 26 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 26 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

Two complete fan-art figures of the demon noblewoman from a hit Korean action fantasy series, one in each outfit, each on its own base. In both she stands with her feet close together on a slab of broken brick paving, one arm folded across her chest and the other hand resting on her thigh, her very long plum-violet hair blown out to one side past her hips. Pointed ears stick out through the hair under a blunt fringe, and her red eyes have thin red marks below them. She wears a high-collared glossy black bodysuit edged in crimson piping. The armored figure adds gunmetal plates at the waist, hips, thighs and knees, greaves with spiked cuffs, clawed gauntlets and a long black cloth panel hanging from the waist, and it comes with two faces to swap: round eyes with parted lips, or narrow eyes with dark liner and two small fangs. The plain figure is the bodysuit alone with black gloves and the round-eyed face. Small black tendrils curl up around the edges of each paving base.

What's in the kit

  • 26 resin pieces in total.
  • Armored figure, 11 pieces: torso, legs with the hip and thigh armor, two faces (round-eyed and fanged), main hair, a separate hair lock, two clawed gauntlet hands, two knee plates and the cloth panel.
  • Armored figure's base, 5 pieces: the brick paving slab and four small black tendril clusters.
  • Plain bodysuit figure, 5 pieces: torso, legs, the round-eyed face, main hair and the separate hair lock.
  • Plain figure's base, 5 pieces: the brick paving slab and four small black tendril clusters.
  • Tallest single piece: the legs, 120.4 mm (4.74 in) in the sculptor's file for the armored figure and 98.4 mm (3.87 in) for the plain bodysuit figure. The sculptor doesn't publish an assembled height, so I don't list one.
  • Each figure's brick paving base: 97.8 × 90.3 mm (3.85 × 3.56 in) across in the sculptor's file.
  • Scale: about 1:10 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:10 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The main hair is a large piece that hangs off the back of the head and sweeps far out to one side. Pin it on both figures.
  • On the armored figure the knee plates, the small gauntlet hand and the tendril clusters are tiny, and the cloth panel is a thin sheet that hangs from a single join at the waist.
  • On the plain figure the waist join sits on smooth glossy suit with nothing over it, so fill and sand that seam carefully.
  • Each face fits onto the front of the head; the fringe and side locks cover most of that seam. The armored figure's two faces fit the same head, so dry-fit the one you want before gluing.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Hybris 3D Studios. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Hybris 3D Studios' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like