Sculptor's render of the painted design (kit ships unpainted): front full view of the purple-haired figure balancing on one foot in the fiery explosion, one arm raised behind her head

Anime Purple-Haired Woman Resin Garage Kit – One-Foot Pose, Fiery Explosion Base, Iron Helmet Upper Body Included (Unpainted, 19 Pieces)

Full kit with both upper bodies (standard and iron helmet), 19 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front full view of the purple-haired figure balancing on one foot in the fiery explosion, one arm raised behind her head
  • Sculptor's render of the painted design (kit ships unpainted): front full view of the purple-haired figure balancing on one foot in the fiery explosion, one arm raised behind her head
  • Sculptor's render (kit ships unpainted): front three-quarter view of the one-foot pose on the concrete slab
  • Sculptor's render (kit ships unpainted): side view of the drawn-up leg and the explosion
  • Sculptor's render (kit ships unpainted): three-quarter rear view with the flame spikes and broken slabs
  • Sculptor's render (kit ships unpainted): side view from the other side, with the raised arm and the fire
  • Sculptor's render (kit ships unpainted): closer view from head to shoes, with the white shirt, black ribbon and shorts
  • Sculptor's render (kit ships unpainted): with the helmet upper body: full view with the iron helmet, cord-wrapped arms and dynamite bundle
  • Sculptor's render (kit ships unpainted): with the helmet upper body: three-quarter view of the helmet spikes and the dynamite bundle
  • Sculptor's render (kit ships unpainted): with the helmet upper body: rear view with the cord harness and the dynamite bundle
  • Sculptor's render (kit ships unpainted): with the helmet upper body: rear three-quarter view of the dynamite bundle hanging down outside the bent leg
  • Sculptor's render of the painted design (kit ships unpainted): front full view of the purple-haired figure balancing on one foot in the fiery explosion, one arm raised behind her head
  • Sculptor's render (kit ships unpainted): front three-quarter view of the one-foot pose on the concrete slab
  • Sculptor's render (kit ships unpainted): side view of the drawn-up leg and the explosion
  • Sculptor's render (kit ships unpainted): three-quarter rear view with the flame spikes and broken slabs
  • Sculptor's render (kit ships unpainted): side view from the other side, with the raised arm and the fire
  • Sculptor's render (kit ships unpainted): closer view from head to shoes, with the white shirt, black ribbon and shorts
  • Sculptor's render (kit ships unpainted): with the helmet upper body: full view with the iron helmet, cord-wrapped arms and dynamite bundle
  • Sculptor's render (kit ships unpainted): with the helmet upper body: three-quarter view of the helmet spikes and the dynamite bundle
  • Sculptor's render (kit ships unpainted): with the helmet upper body: rear view with the cord harness and the dynamite bundle
  • Sculptor's render (kit ships unpainted): with the helmet upper body: rear three-quarter view of the dynamite bundle hanging down outside the bent leg
Anime Purple-Haired Woman Resin Garage Kit – One-Foot Pose, Fiery Explosion Base, Iron Helmet Upper Body Included (Unpainted, 19 Pieces)

Anime Purple-Haired Woman Resin Garage Kit – One-Foot Pose, Fiery Explosion Base, Iron Helmet Upper Body Included (Unpainted, 19 Pieces)

$97.00
KitFull kit with both upper bodies (standard and iron helmet), 19 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 19 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the purple-haired explosive villain from a famous dark action anime. She balances on one foot on a tilted slab of broken concrete in the middle of a glowing explosion, her other leg drawn up with the knee turned out and the shoe tucked against her shin, one arm raised with the forearm across the back of her head and the other hanging loose, with a sly half-smile. She has short dark purple hair with a long strand of fringe across her face and a low bun at the back, and green eyes. She wears a sleeveless white collared shirt with a thin black ribbon tied at the collar and a black choker, dark high-waisted shorts with a belt, black stockings and brown strapped loafers. The base is a round dark plinth with glowing cracks under a burst of glowing fireballs and flame spikes, with broken concrete slabs and rusty rebar sticking up through the fire.

Both looks are in the box. The kit has the standard upper body described above and a second, helmet upper body that fits the same legs, shorts, pose and base: a round iron helmet with jagged teeth and black spikes and no face showing, a torso with a harness of thick twisted cord across the shirt, cord-wrapped forearms and hands, and a long bundle of dynamite sticks hanging down one side. Build whichever you like.

What's in the kit

  • 19 resin pieces in total. Both upper bodies are in the box.
  • Legs and shorts, 3 pieces: two legs with the shoes and the shorts, shared by both looks.
  • Base, 3 pieces: the round plinth and the explosion in two sections.
  • Standard upper body, 5 pieces: head, a separate hair piece, torso with the shirt and two arms.
  • Helmet upper body, 8 pieces: the iron helmet, a torso with the cord harness, four arm pieces (two bare upper arms and two cord-wrapped forearms) and the dynamite bundle in two sections.
  • Studio scale: 1:6 (from 3DMoon's store page for this model).
  • Tallest single piece: the standing leg, 126.1 mm (4.96 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Plinth: 102.5 × 102.5 mm (4.04 × 4.04 in) across in the sculptor's file. The flames reach out past it.
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The whole figure stands on one foot on a tilted slab. Pin the sole into the slab and the leg into the shorts.
  • The base is three pieces: the plinth and two explosion sections that have to meet each other and sit on it. Dry-fit them before glue.
  • The flame spikes, the rebar rods and the raised hand's pointing finger are thin.
  • Helmet upper body: the dynamite bundle is two pieces hanging off the side of the torso, so pin both joins, and fit the cord-wrapped arms last because the loose strands snag.
  • Both upper bodies are in the kit and sit on the same shorts. Glue the one you want to display, or leave the waist joint unglued if you want to swap them later.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like