Sculptor's render of the painted design (kit ships unpainted): front view of the swordsman in the split red and patterned coat, sword raised at his side, inside a ring of translucent blue water and white foam on the round black and gold base

Anime Swordsman Resin Garage Kit – Split Two-Pattern Coat, Drawn Sword & Translucent Water Ring Base (Unpainted, 20 Pieces)

Full kit, 20 pieces
$169.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the swordsman in the split red and patterned coat, sword raised at his side, inside a ring of translucent blue water and white foam on the round black and gold base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the swordsman in the split red and patterned coat, sword raised at his side, inside a ring of translucent blue water and white foam on the round black and gold base
  • Sculptor's render (kit ships unpainted): front view with the full length of the drawn sword angled across the frame
  • Sculptor's render (kit ships unpainted): side view from his right, the sword held upright in front of his chest and the red coat flaring behind him
  • Sculptor's render (kit ships unpainted): rear three-quarter view behind the tallest wave of water and foam, with the sword arm reaching out
  • Sculptor's render (kit ships unpainted): straight rear view of the coat split down the center seam, the water wrapping around his legs
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the green, yellow and orange hexagon pattern behind piled foam
  • Sculptor's render (kit ships unpainted): close-up of the face, the black uniform with gold buttons and the left hand at the scabbard
  • Sculptor's render (kit ships unpainted): close-up of the legs and sandals on the rippled water floor, with the gold wave relief and front medallion on the base
  • Sculptor's render (kit ships unpainted): close-up of the sword's blue-edged blade, red hexagonal guard and white wrapped handle in his hand
  • Sculptor's render (kit ships unpainted): two optional painted looks for the face, a cut cheek and a dark blue cheek mark
  • Sculptor's render of the painted design (kit ships unpainted): front view of the swordsman in the split red and patterned coat, sword raised at his side, inside a ring of translucent blue water and white foam on the round black and gold base
  • Sculptor's render (kit ships unpainted): front view with the full length of the drawn sword angled across the frame
  • Sculptor's render (kit ships unpainted): side view from his right, the sword held upright in front of his chest and the red coat flaring behind him
  • Sculptor's render (kit ships unpainted): rear three-quarter view behind the tallest wave of water and foam, with the sword arm reaching out
  • Sculptor's render (kit ships unpainted): straight rear view of the coat split down the center seam, the water wrapping around his legs
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the green, yellow and orange hexagon pattern behind piled foam
  • Sculptor's render (kit ships unpainted): close-up of the face, the black uniform with gold buttons and the left hand at the scabbard
  • Sculptor's render (kit ships unpainted): close-up of the legs and sandals on the rippled water floor, with the gold wave relief and front medallion on the base
  • Sculptor's render (kit ships unpainted): close-up of the sword's blue-edged blade, red hexagonal guard and white wrapped handle in his hand
  • Sculptor's render (kit ships unpainted): two optional painted looks for the face, a cut cheek and a dark blue cheek mark
Anime Swordsman Resin Garage Kit – Split Two-Pattern Coat, Drawn Sword & Translucent Water Ring Base (Unpainted, 20 Pieces)

Anime Swordsman Resin Garage Kit – Split Two-Pattern Coat, Drawn Sword & Translucent Water Ring Base (Unpainted, 20 Pieces)

$169.00
KitFull kit, 20 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 20 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the quiet, black-haired swordsman from a hugely popular anime about demon hunters. He stands square with his feet apart on a dark, rippled water floor, his right arm reaching forward with a drawn sword whose blade angles up past his head, and his left hand resting on the scabbard at his hip. His face is calm and unreadable. He wears a black high-collared uniform with gold buttons and a white belt, wide black trousers gathered below the knee, white leg wraps and sandals, and over it a coat split down the middle: one half plain deep red with a pebbled texture, the other a geometric pattern of green, yellow and orange hexagons. The sword has a black blade with a blue edge and a short inscription near the guard, a red hexagonal guard and a white wrapped handle. Around him a sheet of water capped with white foam curls up from the floor, low across the front and rising to his shoulders at the back, made to print in clear resin. The base is a round black plinth with gold relief waves around its side and a round medallion at the front bearing the character for water. The studio's renders also show two optional painted looks for the face: a cut cheek and a dark blue cheek mark.

What's in the kit

  • 20 resin pieces in total.
  • Figure, 10 pieces: head, separate hair piece, the torso in two halves (the upper body, and the lower part with the coat skirts), trousers, two arms, the left hand, and both feet with the lower legs.
  • Sword, 1 piece: the drawn sword.
  • Water, 6 pieces: the ring of water and foam in six sections, made for clear resin.
  • Base, 3 pieces: the round base with the water floor, the front medallion and a plug.
  • Studio size: the studio's scale sheet gives the assembled model as 247.7 × 403.3 × 335.9 mm (9.75 × 15.88 × 13.22 in), measured in the slicer as a single merged model. The sheet doesn't label which of these is the height, so I quote it as given.
  • Round base: 194.6 × 194.5 mm (7.66 × 7.66 in) across in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The water comes in six large, curved sections that close into one ring around him. Dry-fit the whole ring on the base before you glue anything, and pin it to the base; the sections are heavy and every seam shows through clear resin.
  • Sand any support marks off the outer faces of the water before priming. Glazes and a gloss coat give it a wet look.
  • The sword is long and thin and held only in the fist of the forward-reaching arm. Pin the arm at the shoulder and the blade into the hand.
  • The base is a large, heavy part. The left hand and the medallion are small parts; fit them last.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Lion Realm Studio. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Lion Realm Studio's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like