Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the figure seated on the purple cobra's coils, with the saluting blue creature and the flowered base

Anime Villain Girl Resin Garage Kit – Purple Cobra, Saluting Blue Creature & Flowered Rock Base (Unpainted, 18 Pieces)

Full kit, 18 pieces
$105.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the figure seated on the purple cobra's coils, with the saluting blue creature and the flowered base
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the figure seated on the purple cobra's coils, with the saluting blue creature and the flowered base
  • Sculptor's render (kit ships unpainted): straight front view showing the cobra's full hood pattern behind her
  • Sculptor's render (kit ships unpainted): side view showing the depth of the coils, the long hair and the blue creature's tail
  • Sculptor's render (kit ships unpainted): front right view of the saluting blue creature, the frog and the daisy below her
  • Sculptor's render (kit ships unpainted): close-up of the base front with the ring medallion, the cobra's tail and the small frog
  • Sculptor's render (kit ships unpainted): close-up of her face and uniform beside the cobra's open mouth
  • Sculptor's render (kit ships unpainted): low-angle close-up of the crossed boots and gloved hands with the hood behind her
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the figure seated on the purple cobra's coils, with the saluting blue creature and the flowered base
  • Sculptor's render (kit ships unpainted): straight front view showing the cobra's full hood pattern behind her
  • Sculptor's render (kit ships unpainted): side view showing the depth of the coils, the long hair and the blue creature's tail
  • Sculptor's render (kit ships unpainted): front right view of the saluting blue creature, the frog and the daisy below her
  • Sculptor's render (kit ships unpainted): close-up of the base front with the ring medallion, the cobra's tail and the small frog
  • Sculptor's render (kit ships unpainted): close-up of her face and uniform beside the cobra's open mouth
  • Sculptor's render (kit ships unpainted): low-angle close-up of the crossed boots and gloved hands with the hood behind her
Anime Villain Girl Resin Garage Kit – Purple Cobra, Saluting Blue Creature & Flowered Rock Base (Unpainted, 18 Pieces)

Anime Villain Girl Resin Garage Kit – Purple Cobra, Saluting Blue Creature & Flowered Rock Base (Unpainted, 18 Pieces)

$105.00
KitFull kit, 18 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 18 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the magenta-haired villain from a famous monster-catching anime, with her purple cobra partner. She sits cross-legged on the cobra's thick coils, one gloved hand on her knee and a small red ball raised in the other, her long hair sweeping down behind her. The cobra's hood rises at her back with an open fanged mouth and a bold eye pattern, a round blue creature salutes at her side, and a small blue frog sits among the flowers. She wears a white cropped uniform top with a red letter emblem, a short white skirt, long black gloves and glossy black thigh-high boots. The base is a mossy rock mound with a large daisy, set on a black-and-white ring with a matching red letter medallion at the front.

What's in the kit

  • 18 resin pieces in total.
  • Figure, 10 pieces: head, hair in two pieces, torso, waist, skirt, two arms (one holding the small ball) and two legs.
  • Cobra, 4 pieces: the cobra's body in four sections, including the hooded head.
  • Companions, 2 pieces: the saluting blue creature and the small blue frog.
  • Base, 2 pieces: the black-and-white ring with the medallion, and the flowered rock mound.
  • Tallest single piece: the largest cobra section, 139.2 mm (5.48 in) in the sculptor's file. The finished piece stands taller once the base and the coils are stacked. The sculptor doesn't publish an assembled height, so I don't list one.
  • Base: the ring is 161.9 × 172.5 mm (6.37 × 6.79 in) across in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • She sits on the cobra's biggest coil, and the hooded head stands up behind her with a forward lean. Pin both into the parts below them.
  • The ring and the rock mound decide where the coils land. Dry-fit the whole stack before you glue anything.
  • The joins at the waist run through bare midriff and the top of the skirt, where seams show. Fill and sand them smooth.
  • The small hair curl, the frog and the flower petals are small and thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like