Sculptor's render of the painted design (kit ships unpainted): full front view of the figure in the tunic and skirt, standing on the mossy log over the lily pond, spear held at her side, with the blossom tree and two small tree spirits

Anime Fur-Caped Spear Girl Resin Garage Kit Bundle – Two Complete Figures, Tunic and Dress, Each on Its Own Lily Pond Log Base with Blossom Tree & Tree Spirits (Unpainted, 47 Pieces)

Both outfits bundle, 47 pieces
$166.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the figure in the tunic and skirt, standing on the mossy log over the lily pond, spear held at her side, with the blossom tree and two small tree spirits
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the figure in the tunic and skirt, standing on the mossy log over the lily pond, spear held at her side, with the blossom tree and two small tree spirits
  • Sculptor's render (kit ships unpainted): the second figure, in the sleeveless purple dress, from the same front view
  • Sculptor's render (kit ships unpainted): full back view showing the white fur cape, the cut end of the log and the pond with its floating blossom
  • Sculptor's render (kit ships unpainted): the same back view of the figure in the dress
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the figure in the tunic and skirt, standing on the mossy log over the lily pond, spear held at her side, with the blossom tree and two small tree spirits
  • Sculptor's render (kit ships unpainted): the second figure, in the sleeveless purple dress, from the same front view
  • Sculptor's render (kit ships unpainted): full back view showing the white fur cape, the cut end of the log and the pond with its floating blossom
  • Sculptor's render (kit ships unpainted): the same back view of the figure in the dress
Anime Fur-Caped Spear Girl Resin Garage Kit Bundle – Two Complete Figures, Tunic and Dress, Each on Its Own Lily Pond Log Base with Blossom Tree & Tree Spirits (Unpainted, 47 Pieces)

Anime Fur-Caped Spear Girl Resin Garage Kit Bundle – Two Complete Figures, Tunic and Dress, Each on Its Own Lily Pond Log Base with Blossom Tree & Tree Spirits (Unpainted, 47 Pieces)

$166.00
KitBoth outfits bundle, 47 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 47 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the wolf-raised girl from a classic animated fantasy film. She stands on a mossy log laid across a small lily pond, looking back over her shoulder, with a long wooden spear with a leaf-shaped metal head held low at her side. A thick white fur cape with a spiky ruff hangs from her shoulders down her back. She has a short brown bob with a dark headband set with a red stone, red marks painted on her cheeks, red drop earrings, a bead necklace with white fang pendants, a braided armband, red cord wrapped at both wrists and tan wraps on her feet. This is a bundle of two complete figures, one in each outfit, each on its own base: one in a sleeveless white tunic over a ragged purple skirt, and one in a sleeveless dusty-purple dress with a ragged hem and a red streak across the front. Each base is a round pond with lily pads and a floating red blossom. A twisted tree grows from one end of the log and carries three red blossoms, and two small white tree spirits stand on the moss at her feet.

What's in the kit

  • 47 resin pieces in total: two complete figures, one in each outfit, each with its own cape, spear and base.
  • Figure in the tunic and skirt, 10 pieces: head, hair with the headband, tunic top, skirt, two arms, two legs and two foot wraps.
  • Its cape, spear, necklace and base, 14 pieces: the fur cape, the spear in two halves, the bead necklace, the round pond base, the floating pond blossom, the log with the twisted tree, three tree blossoms, two leaf clumps and two small tree spirits.
  • Figure in the dress, 9 pieces: head, hair with the headband, the dress (shoulders to hem in a single piece), two arms, two legs and two foot wraps.
  • Its cape, spear, necklace and base, 14 pieces: the fur cape, the spear in two halves, the bead necklace, the round pond base, the floating pond blossom, the log with the twisted tree, three tree blossoms, two leaf clumps and two small tree spirits.
  • Both figures are the same size. Tallest single piece in each build: the log with the twisted tree, 142.1 mm (5.59 in) in the sculptor's file. The tallest figure piece is the left leg, 123.7 mm (4.87 in). The sculptor doesn't publish an assembled height, so I don't list one.
  • Each round pond base: 167.8 × 156.0 mm (6.61 × 6.14 in) across in the sculptor's file. The log piece spans 197.1 mm (7.76 in), wider than the pond, so it reaches past the rim.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The fur cape is the heaviest piece on the figure and hangs off the back of her shoulders. Pin it into her back.
  • The spear comes in two long, thin halves and passes through her hand. Pin the joint with brass rod, and fit it after the arm is glued.
  • Glue the log to the pond base first, then pin both foot wraps into the log. The cape pulls her weight to the rear.
  • The necklace, the four blossoms, the leaf clumps and the tree spirits' arms are thin and delicate. Take the supports off gently.
  • You're building two complete figures, so every cape, spear, blossom and tree spirit comes twice. Keep each figure's parts together until they're glued; only the tunic top and skirt and the dress differ.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Hybris 3D Studios. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Hybris 3D Studios' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like