Studio scale and parts sheet (kit ships unpainted): the studio's sizes for the miniature (152 mm tall, 137 mm wide, 113 mm long) and the 1:10 scale; the exploded parts shown are the studio's 1:10 layout, and the miniature comes in 20 pieces

Anime White-Maned Ninja on a Giant Red Toad Resin Garage Kit – Glowing Energy Sphere, Broken Shrine Gate & Rock Diorama (Unpainted, Miniature, 20 Pieces)

Miniature, 20 pieces
$80.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the studio's sizes for the miniature (152 mm tall, 137 mm wide, 113 mm long) and the 1:10 scale; the exploded parts shown are the studio's 1:10 layout, and the miniature comes in 20 pieces
  • Studio scale and parts sheet (kit ships unpainted): the studio's sizes for the miniature (152 mm tall, 137 mm wide, 113 mm long) and the 1:10 scale; the exploded parts shown are the studio's 1:10 layout, and the miniature comes in 20 pieces
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 152 mm tall; front view of the white-maned ninja on the giant red toad, the glowing sphere raised and the sword jutting from the toad's hand
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 152 mm tall; side view showing the toad's indigo vest, the curling smoke and the short sword
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 152 mm tall; side view with the gate wreckage, the paper lantern and the toad's pipe
  • Studio scale and parts sheet (kit ships unpainted): the studio's sizes for the miniature (152 mm tall, 137 mm wide, 113 mm long) and the 1:10 scale; the exploded parts shown are the studio's 1:10 layout, and the miniature comes in 20 pieces
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 152 mm tall; front view of the white-maned ninja on the giant red toad, the glowing sphere raised and the sword jutting from the toad's hand
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 152 mm tall; side view showing the toad's indigo vest, the curling smoke and the short sword
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 152 mm tall; side view with the gate wreckage, the paper lantern and the toad's pipe
Anime White-Maned Ninja on a Giant Red Toad Resin Garage Kit – Glowing Energy Sphere, Broken Shrine Gate & Rock Diorama (Unpainted, Miniature, 20 Pieces)

Anime White-Maned Ninja on a Giant Red Toad Resin Garage Kit – Glowing Energy Sphere, Broken Shrine Gate & Rock Diorama (Unpainted, Miniature, 20 Pieces)

$80.00
KitMiniature, 20 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 20 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art diorama of the white-maned, wandering ninja master from a famous ninja anime, standing on the back of a huge red toad. He plants a wide stance on the toad's back, body turned so the giant scroll on his back faces the viewer while he grins back over his shoulder. One hand is raised in front of his face with two fingers up; the other arm is thrown up behind him holding a glowing pale-blue energy sphere, with teal ribbons of energy spiraling off it and sweeping down past the toad. His long, spiky white mane falls past his waist, he wears a horned metal headband marked with a single character, and red lines run down from his eyes. He wears an olive-green top and trousers, a red sleeveless vest with a yellow disc on the shoulder, mesh at the wrists and ankles, a metal hand guard and red wooden sandals, and the scroll on his back is a large red cylinder with a white label and rope lashings. The warty red toad wears an indigo vest with a white rope sash, has a long pipe tucked in the sash and rests one hand on a short sword whose blade juts out past the base; its other hand is bandaged. Cream smoke curls around the toad, and the base is a mound of tan rock spikes over gray rubble with the broken pieces of a red shrine gate, a knife stuck in one beam, two throwing stars and a hanging paper lantern.

This listing is the miniature: the same scene in 20 pieces, 152 mm tall on the studio's scale sheet. The full 1:10 scale diorama and the bust of the ninja are sold as separate listings.

What's in the kit

  • 20 resin pieces in total.
  • Ninja, 5 pieces: head, mane, torso with arms, trousers with feet, and the giant scroll.
  • Toad, 6 pieces: head, body, two hands, feet and the pipe.
  • Base, 3 pieces: the rock base and the shrine gate in two pieces.
  • Effects, 6 pieces: the energy sphere, two energy ribbons and three smoke pieces.
  • Miniature: 152 mm (5.98 in) tall, 137 mm (5.39 in) wide and 113 mm (4.45 in) long (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build from the bottom up: the rock base, then the toad's head and body, then the ninja on the toad's back.
  • The energy ribbons and the sphere reach out to one side of the ninja. Dry-fit them and pin the ribbons at both ends.
  • At this size the short sword is part of the toad's hand and the lantern is part of the base. The pipe, the hair tips and the ribbon ends are very fine.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like