Anime Wolf-Eared Girl Resin Garage Kit – Long Yellow Dress, Windblown Hair & Wooden Fence on a Plank Floor (Unpainted, 21 Pieces)
Anime Wolf-Eared Girl Resin Garage Kit – Long Yellow Dress, Windblown Hair & Wooden Fence on a Plank Floor (Unpainted, 21 Pieces)
Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works
IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.
The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 21 separate pieces of plain, single-color resin. It is:
- Unassembled: you glue the pieces together yourself.
- Unprimed: it needs primer before paint.
- Unsanded: seams and surfaces need sanding.
- Unpainted: all painting is up to you.
Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.
This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.
A fan-art statue of the wolf-eared harvest goddess from a fantasy anime about a traveling merchant. She leans back against a rough wooden fence with both arms spread along the top rail, one hand hooked over it and the other laid flat, and steps one foot forward onto the plank floor. Her eyes are closed and she is laughing, mouth open on a pointed fang. A gust from one side blows her long hair, the hem of her skirt and her fluffy tail out to the same side. She has pointed wolf ears with white fur inside, a straight-cut fringe and long side locks. She wears a long-sleeved, ankle-length dress with a full skirt, a wide sash wrapped at the waist and knotted at the front with one long tail hanging down, a small drawstring pouch on a thin cord around her neck, and leather shoes with square buckles and banded ankle wraps. The scene is a corner of a farm fence with deep carved wood grain: two posts, a short center post, an arched top rail, a middle rail and a sill, standing on a floor of rough planks.
What's in the kit
- 21 resin pieces in total.
- Figure, 9 pieces: head, fringe with side locks, long back hair, upper body with both sleeves, two hands, two legs with shoes, and the tail.
- Cloth, 2 pieces: the skirt and the knotted sash.
- Accessory, 1 piece: the neck cord with its pouch.
- Fence and floor, 9 pieces: two fence posts, a short center post, the arched top rail, the middle rail, the sill and the plank floor in three sections.
- Tallest single piece: a leg with its shoe, 114.1 mm (4.49 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
- Fence top rail: 165.5 mm (6.52 in) long in the sculptor's file. The plank floor sections are 116.6 mm (4.59 in) deep.
- Scale: about 1:10 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:10 figures, and scale can differ from one creator to another.
About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
Skill level: advanced
- Build the fence and floor first. The three floor sections join along plank gaps, and the posts and rails have to stand square on top before the figure goes in.
- Her hands rest on the top rail and her feet stand on the planks. The hands are separate parts, so glue them last and set them to the rail. Pin both legs into the floor.
- The long back hair and the tail stick out to one side. Pin both.
- Thin parts: the fingers, the neck cord and pouch, the sash tails and the ends of the hair strands.
You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.
How ordering works
Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.
Shipping and returns
- Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
- International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
- 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.
Sculptor credit and license
This sculpt is by Moon Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Moon Figures' commercial tier on Patreon. Please support the artist:
- Patreon: patreon.com/MoonFigures
- Buy the 3D files: Cults3D · Gumroad
Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.