Sculptor's render of the painted design (kit ships unpainted): front three-quarter full view of the acrobat balanced on one leg, one arm over her head and her braid swinging out, between three red pennants on the round stage base

Cartoon Acrobat Girl Resin Garage Kit – One-Leg Balance, Long Braid & Red Pennant Stage (Unpainted, 15 Pieces)

Full kit, 15 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter full view of the acrobat balanced on one leg, one arm over her head and her braid swinging out, between three red pennants on the round stage base
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter full view of the acrobat balanced on one leg, one arm over her head and her braid swinging out, between three red pennants on the round stage base
  • Sculptor's render (kit ships unpainted): straight front full view, with both front pennants facing the camera
  • Sculptor's render (kit ships unpainted): side full view showing the raised leg folded behind her and the braid trailing
  • Sculptor's render (kit ships unpainted): back full view with the braid arcing over her raised arm, the sash tails and the third pennant
  • Sculptor's render (kit ships unpainted): full view from her other side with the pennant poles in the foreground
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter full view of the acrobat balanced on one leg, one arm over her head and her braid swinging out, between three red pennants on the round stage base
  • Sculptor's render (kit ships unpainted): straight front full view, with both front pennants facing the camera
  • Sculptor's render (kit ships unpainted): side full view showing the raised leg folded behind her and the braid trailing
  • Sculptor's render (kit ships unpainted): back full view with the braid arcing over her raised arm, the sash tails and the third pennant
  • Sculptor's render (kit ships unpainted): full view from her other side with the pennant poles in the foreground
Cartoon Acrobat Girl Resin Garage Kit – One-Leg Balance, Long Braid & Red Pennant Stage (Unpainted, 15 Pieces)

Cartoon Acrobat Girl Resin Garage Kit – One-Leg Balance, Long Braid & Red Pennant Stage (Unpainted, 15 Pieces)

$97.00
KitFull kit, 15 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 15 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the cheerful circus acrobat from a well-known animated fantasy series. She balances on one leg with the other folded up behind her, one arm arched over her head and the other reaching out to the side, while her long braid swings out the opposite way. She has a short fringe, large amber-brown eyes and a small closed-mouth smile, and her long brown braid is tied with red bands at the top and the tip. She wears a dusty pink cropped top with cap sleeves and a raised collar, a dark red pointed collar-cape with a small flame emblem, a dark red sash with flaps at the front and long tails at the back, full pink trousers cuffed below the knee, red wristbands and flat brown strap shoes. The base is a round two-tier stage: a dark stepped ring under a drum of wood planking with grey stone pillars and red curtain swags trimmed in gold rope, topped with red cloth and a flame emblem. Three wooden poles lashed with rope rise from the stage, each hanging a red pennant with a gold border and a flame emblem.

What's in the kit

  • 15 resin pieces in total.
  • Figure, 10 pieces: head, hair in two pieces including the long braid, top, midriff, two arms, hips and trousers in a single piece and two lower legs with shoes.
  • Base, 5 pieces: the stage in two tiers and three pennant poles.
  • Studio scale: 1:6 (from 3DMoon's store page for this model).
  • Tallest single piece: a pennant pole, 145.3 mm (5.72 in) in the sculptor's file. The sculptor doesn't publish an assembled height, so I don't list one.
  • Stage base: 133.1 × 133.1 mm (5.24 × 5.24 in) across in the sculptor's file.
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The whole figure stands on one lower leg and one shoe. Pin it into the trousers and through the shoe into the base; glue alone won't hold.
  • The folded-up leg and the long braid both hang free. Pin them at the knee and at the hair tie.
  • The midriff piece joins the top and the sash on smooth, visible areas. Plan to fill and sand both seams.
  • The three pennant poles are long and thin, and the extended hand has spread fingers.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like