Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the acrobat leaping off a leaning wooden bridge, a white energy swirl trailing from her hand, arrows and water below

Cartoon Airborne Acrobat Resin Garage Kit – Leap Off a Collapsing Bridge, White Energy Swirls & Arrows (Unpainted, 1:10 Scale, 29 Pieces)

1:10 scale, 29 pieces
$95.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the acrobat leaping off a leaning wooden bridge, a white energy swirl trailing from her hand, arrows and water below
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the acrobat leaping off a leaning wooden bridge, a white energy swirl trailing from her hand, arrows and water below
  • Sculptor's render (kit ships unpainted): front view from the other side, the fence behind her and the log's brass ring at the front
  • Sculptor's render, shown in gray (kit ships unpainted): front three-quarter view of the whole sculpt
  • Sculptor's render, shown in gray (kit ships unpainted): front view with her hand reaching for the fence post
  • Sculptor's render, shown in gray (kit ships unpainted): side view along the tilted plank deck
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the braid thrown up and a swirl curling around her raised leg
  • Sculptor's render, shown in gray (kit ships unpainted): rear view of the figure reaching for the tall post, with the underside of the deck
  • Sculptor's render (kit ships unpainted): close view of the base, the fallen log with its brass ring, broken planks, arrows and blue water
  • Studio scale sheet (kit ships unpainted): the 1:10 split version with each part in a different color, 199 mm tall, 171 mm wide and 176 mm long
  • Studio scale and parts sheet (kit ships unpainted): the parts of the 1:10 split version laid out, each in a different color, with one version of the largest swirl
  • Sculptor's render of the painted design (kit ships unpainted): front three-quarter view of the acrobat leaping off a leaning wooden bridge, a white energy swirl trailing from her hand, arrows and water below
  • Sculptor's render (kit ships unpainted): front view from the other side, the fence behind her and the log's brass ring at the front
  • Sculptor's render, shown in gray (kit ships unpainted): front three-quarter view of the whole sculpt
  • Sculptor's render, shown in gray (kit ships unpainted): front view with her hand reaching for the fence post
  • Sculptor's render, shown in gray (kit ships unpainted): side view along the tilted plank deck
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the braid thrown up and a swirl curling around her raised leg
  • Sculptor's render, shown in gray (kit ships unpainted): rear view of the figure reaching for the tall post, with the underside of the deck
  • Sculptor's render (kit ships unpainted): close view of the base, the fallen log with its brass ring, broken planks, arrows and blue water
  • Studio scale sheet (kit ships unpainted): the 1:10 split version with each part in a different color, 199 mm tall, 171 mm wide and 176 mm long
  • Studio scale and parts sheet (kit ships unpainted): the parts of the 1:10 split version laid out, each in a different color, with one version of the largest swirl
Cartoon Airborne Acrobat Resin Garage Kit – Leap Off a Collapsing Bridge, White Energy Swirls & Arrows (Unpainted, 1:10 Scale, 29 Pieces)

Cartoon Airborne Acrobat Resin Garage Kit – Leap Off a Collapsing Bridge, White Energy Swirls & Arrows (Unpainted, 1:10 Scale, 29 Pieces)

$95.00
Kit1:10 scale, 29 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 29 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the cheerful circus acrobat from a beloved American animated series about elemental martial arts. She is caught in mid-air, leaping off a wooden bridge that is falling apart under her: one foot pushes off the tilted plank deck, the other knee is pulled up high, her leading hand jabs straight at a brass-capped post with the fingers together, and her trailing hand flings out a long white swirl of energy that arcs up past her head. Her long brown braid, tied with red bands, flies up behind her in the same direction, and she wears a confident, closed-mouth smirk with one eyebrow raised. She wears a pink cropped top with short puffed sleeves under a pointed red-orange collar-cape, red wrist cuffs, a red sash with a split skirt panel and two loose sash tails, loose pink trousers gathered into red bands below the knee, and dark red flat shoes. The base is the whole scene: a leaning plank deck with a three-rail fence, a tall brass-capped post, a fallen log with a brass collar and ring, gray boulders in blue water with white foam, nine arrows stuck into the wood and the ground, and more white energy swirls curling around the base and her raised shin. This listing is the 1:10 scale statue, 29 pieces. The miniature of the same scene is sold as a separate listing.

What's in the kit

  • 29 resin pieces in total.
  • Figure, 10 pieces: head, fringe, braid, torso with the collar-cape, two arms, trousers, the skirt panel with the sash tails, and two lower legs with shoes.
  • Base, 5 pieces: the rock-and-water ground, the fallen log, the plank deck, the three-rail fence and the tall post section.
  • Arrows, 9 pieces.
  • Energy swirls, 5 pieces: the four swirls, with both a long and a short version of the largest one to choose from.
  • 1:10 scale: 199 mm (7.83 in) tall, 171 × 176 mm (6.73 × 6.93 in) footprint (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The 1:10 base is five large sections plus nine loose arrows. Build and fill the base first, with the deck leaning against the fence and post, then fit the arrows into the wood and ground.
  • The whole figure lands on the base through one foot on the tilted deck, and her jabbing hand reaches the brass-capped post. Pin the planted foot and dry-fit the hand to the post before gluing.
  • The energy swirls are thin, freestanding shapes that attach at their tips to her hand, her shin and the base. Pin or glue them last.
  • Thin parts: the braid, the sash tails, the fingers, the fence rails and every arrow shaft and fletching.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like