Studio scale and parts sheet (kit ships unpainted): the studio's sizes for each version, including the miniature (75 mm tall, 71 mm wide, 74 mm long), with the miniature's parts shown at the bottom

Cartoon Bearded Old General Resin Garage Kit – Green Robe, Redirected Lightning & Cloud-Ringed Rock Base (Unpainted, Miniature, 7 Pieces)

Miniature, 7 pieces
$39.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the studio's sizes for each version, including the miniature (75 mm tall, 71 mm wide, 74 mm long), with the miniature's parts shown at the bottom
  • Studio scale and parts sheet (kit ships unpainted): the studio's sizes for each version, including the miniature (75 mm tall, 71 mm wide, 74 mm long), with the miniature's parts shown at the bottom
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 75 mm tall; front view of the bearded old general crouched in a wide stance, lightning pouring from his lower hand, on the cloud-ringed rock base
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 75 mm tall; painted view with glowing blue lightning against a stormy mountain sky
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 75 mm tall; side view with the lightning stream held out to one side
  • Studio scale and parts sheet (kit ships unpainted): the studio's sizes for each version, including the miniature (75 mm tall, 71 mm wide, 74 mm long), with the miniature's parts shown at the bottom
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 75 mm tall; front view of the bearded old general crouched in a wide stance, lightning pouring from his lower hand, on the cloud-ringed rock base
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 75 mm tall; painted view with glowing blue lightning against a stormy mountain sky
  • Sculptor's render of the painted design (kit ships unpainted): the miniature is the same sculpt at 75 mm tall; side view with the lightning stream held out to one side
Cartoon Bearded Old General Resin Garage Kit – Green Robe, Redirected Lightning & Cloud-Ringed Rock Base (Unpainted, Miniature, 7 Pieces)

Cartoon Bearded Old General Resin Garage Kit – Green Robe, Redirected Lightning & Cloud-Ringed Rock Base (Unpainted, Miniature, 7 Pieces)

$39.00
KitMiniature, 7 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 7 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the kindly, tea-loving retired general from a much-loved animated fantasy series, shown redirecting a bolt of lightning. He crouches low and wide on a slab of broken rock with his weight forward. One arm is thrown up and back with two fingers out and a small jag of lightning at the fingertips, and the other sweeps low across his body as the main stream of lightning pours from that hand, splitting into branches that curl around his legs and dive into the rock. He is bald on top, with a gray topknot, long gray hair streaming back, a full beard and mustache, heavy brows and a calm half-smile. He wears a dark green outer robe with huge flared sleeves edged in cream trim and a round emblem on one sleeve, a lighter green tunic, a cream under-robe with a ruffled hem, a gray-teal sash with two hanging straps and a gold buckle plate, cream wrapped trousers and brown boots with gold toe caps. The base is a gray cracked-rock plateau with loose rubble, ringed on both sides by pale curling wisps of cloud.

This listing is the miniature: the same statue in 7 pieces, 75 mm tall on the studio's scale sheet. The full 1:10 scale statue and the bust are sold as separate listings.

What's in the kit

  • 7 resin pieces in total.
  • Figure, 5 pieces: upper body, lower body, head and two hands.
  • Lightning, 1 piece: the fingertip jag.
  • Base, 1 piece: the rock with the cloud wisps and the lightning arcs as a single piece.
  • Miniature: 75 mm (2.95 in) tall, 71 mm (2.80 in) wide and 74 mm (2.91 in) long (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The base carries the cloud wisps and the lightning arcs in a single piece. Glue the lower body onto the rock by the boots first, then the upper body, head and hands.
  • The fingertip jag and the hands are tiny parts that are easy to lose in the wash. Use tweezers.
  • The fused lightning arcs on the base are thin. Handle the base by the rock.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like