Sculptor's render of the painted design (kit ships unpainted): front view of the whole statue, the hooded skull-faced sorcerer raising his ram-skull staff on the spiked lava rock

Chibi Hooded Skull Sorcerer Resin Garage Kit – Purple Hood, Ram-Skull Staff & Spiked Lava Rock Base (Unpainted, 13 Pieces)

Full kit, 13 pieces
$75.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the whole statue, the hooded skull-faced sorcerer raising his ram-skull staff on the spiked lava rock
  • Sculptor's render of the painted design (kit ships unpainted): front view of the whole statue, the hooded skull-faced sorcerer raising his ram-skull staff on the spiked lava rock
  • Sculptor's render (kit ships unpainted): straight-on front view with the staff raised in his right hand and his left hand open at his side
  • Sculptor's render (kit ships unpainted): three-quarter view from his right with the lava streams running down the corner of the rock
  • Sculptor's render (kit ships unpainted): side profile holding the staff upright, the skull face set deep inside the rounded hood
  • Sculptor's render (kit ships unpainted): back view of the hood and mantle, the harness strap and the staff raised over his shoulder
  • Sculptor's render (kit ships unpainted): rear three-quarter view from his right with the ram skull side-on and the long lava drip down the far corner
  • Sculptor's render (kit ships unpainted): front view from hood to boots showing the studded belt, riveted loincloth and boot cuffs
  • Sculptor's render (kit ships unpainted): darker front view with the lava cracks on the front of the rock
  • Sculptor's render (kit ships unpainted): close-up of the grinning skull face with glowing red eyes inside the purple hood, above the crossbones harness and red gem
  • Sculptor's render of the painted design (kit ships unpainted): front view of the whole statue, the hooded skull-faced sorcerer raising his ram-skull staff on the spiked lava rock
  • Sculptor's render (kit ships unpainted): straight-on front view with the staff raised in his right hand and his left hand open at his side
  • Sculptor's render (kit ships unpainted): three-quarter view from his right with the lava streams running down the corner of the rock
  • Sculptor's render (kit ships unpainted): side profile holding the staff upright, the skull face set deep inside the rounded hood
  • Sculptor's render (kit ships unpainted): back view of the hood and mantle, the harness strap and the staff raised over his shoulder
  • Sculptor's render (kit ships unpainted): rear three-quarter view from his right with the ram skull side-on and the long lava drip down the far corner
  • Sculptor's render (kit ships unpainted): front view from hood to boots showing the studded belt, riveted loincloth and boot cuffs
  • Sculptor's render (kit ships unpainted): darker front view with the lava cracks on the front of the rock
  • Sculptor's render (kit ships unpainted): close-up of the grinning skull face with glowing red eyes inside the purple hood, above the crossbones harness and red gem
Chibi Hooded Skull Sorcerer Resin Garage Kit – Purple Hood, Ram-Skull Staff & Spiked Lava Rock Base (Unpainted, 13 Pieces)

Chibi Hooded Skull Sorcerer Resin Garage Kit – Purple Hood, Ram-Skull Staff & Spiked Lava Rock Base (Unpainted, 13 Pieces)

$75.00
KitFull kit, 13 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 13 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the skull-faced sorcerer villain from a classic 1980s cartoon and toy line, raising his staff. He stands with his boots planted apart on a ledge of volcanic rock, his right fist held high gripping a long magenta staff that runs down across his body, and his left arm out to the side with the clawed hand open, palm up. His pale yellow-green skull face scowls out of a huge rounded purple hood with a rolled rim, with glowing red eyes, heavy brow ridges and a wide grin with a fang at each corner; the hood falls into a short mantle over his shoulders. His skin is periwinkle blue and heavily muscled. He wears dark purple riveted shoulder plates, a purple chest harness with a crossbones emblem and a round red gem, a wide studded purple belt with riveted loincloth panels over black trunks, and short purple boots with turned-down cuffs. The staff has a stack of turned rings under its head, a ball at the bottom and a bone-gray ram skull on top with a toothed snout and two horns that curl around. The base is a slab of dark volcanic rock ringed with jagged spikes, with red lava cracks, orange lava streams pouring over the front corner and stalactites hanging under the rim.

What's in the kit

  • 13 resin pieces in total.
  • Figure, 9 pieces: the skull face in the hood, the torso with the harness and crossbones emblem, two arms, the waist with the studded belt and loincloth, two thighs and two boots.
  • Staff, 2 pieces: the ram-skull head and the shaft.
  • Base, 2 pieces: the spiked lava rock in two halves.
  • Tallest single piece: the larger rock half with the tallest spikes, 92.3 mm (3.63 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Rock base: 132.7 × 117.8 mm (5.22 × 4.64 in) across, from the sculptor's single-piece file of the same base.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The hooded head is the heaviest figure piece by far and sits on a slimmer torso and two thighs. Pin the head to the torso and both boots into the rock.
  • The ram skull is heavy for the thin shaft that holds it up. Pin the skull to the shaft.
  • The rock spikes, lava drips, stalactites, ram horns and clawed fingers are thin points.
  • The rock comes in two halves, with a seam through the rock to fill. The thighs are smooth bare skin, so any seam there needs blending.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like