Sculptor's render of the painted design (kit ships unpainted): front view of the girl balanced on one boot on a water spout, three arcs of pale blue water curling around her, on a tan rock base

Cartoon Water-Wielding Girl Resin Garage Kit – Blue Tunic, Three Swirling Water Arcs & Water Spout Rock Base (Unpainted, 1:10 Scale, 19 Pieces)

1:10 scale, 19 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the girl balanced on one boot on a water spout, three arcs of pale blue water curling around her, on a tan rock base
  • Sculptor's render of the painted design (kit ships unpainted): front view of the girl balanced on one boot on a water spout, three arcs of pale blue water curling around her, on a tan rock base
  • Sculptor's render (kit ships unpainted): painted front view against a dark blue sky, the tall water hook breaking above her head
  • Sculptor's render (kit ships unpainted): side view with the water band crossing in front of her and the back skirt panel flaring behind
  • Sculptor's render (kit ships unpainted): side view from her other side, the tall water hook rising behind her
  • Sculptor's render (kit ships unpainted): rear view of the back skirt panel, the flying hair and the coil of water
  • Sculptor's render (kit ships unpainted): unpainted gray front view of the full 1:10 sculpt
  • Sculptor's render (kit ships unpainted): gray front view from her right, the water tendril in the foreground
  • Sculptor's render (kit ships unpainted): gray rear view from her left, the back coil of water in profile
  • Sculptor's render (kit ships unpainted): gray rear view from her right, the tall water hook rising at the side
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 statue with the studio's sizes for each version, and the 19 parts of the 1:10 split kit laid out
  • Sculptor's render of the painted design (kit ships unpainted): front view of the girl balanced on one boot on a water spout, three arcs of pale blue water curling around her, on a tan rock base
  • Sculptor's render (kit ships unpainted): painted front view against a dark blue sky, the tall water hook breaking above her head
  • Sculptor's render (kit ships unpainted): side view with the water band crossing in front of her and the back skirt panel flaring behind
  • Sculptor's render (kit ships unpainted): side view from her other side, the tall water hook rising behind her
  • Sculptor's render (kit ships unpainted): rear view of the back skirt panel, the flying hair and the coil of water
  • Sculptor's render (kit ships unpainted): unpainted gray front view of the full 1:10 sculpt
  • Sculptor's render (kit ships unpainted): gray front view from her right, the water tendril in the foreground
  • Sculptor's render (kit ships unpainted): gray rear view from her left, the back coil of water in profile
  • Sculptor's render (kit ships unpainted): gray rear view from her right, the tall water hook rising at the side
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 statue with the studio's sizes for each version, and the 19 parts of the 1:10 split kit laid out
Cartoon Water-Wielding Girl Resin Garage Kit – Blue Tunic, Three Swirling Water Arcs & Water Spout Rock Base (Unpainted, 1:10 Scale, 19 Pieces)

Cartoon Water-Wielding Girl Resin Garage Kit – Blue Tunic, Three Swirling Water Arcs & Water Spout Rock Base (Unpainted, 1:10 Scale, 19 Pieces)

$97.00
Kit1:10 scale, 19 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 19 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the young water-wielding heroine from a much-loved animated fantasy series, mid-move. She balances on one boot on the crest of a water spout with the other leg bent back behind her. One arm reaches up and back over her shoulder with the fingers spread, and the other is held low in front, palm open, with a thick tendril of water curling off it, while she turns her face to the viewer with a set, determined look. Her long brown hair flies up and back, with two front loops pinned by small pale-blue clasps. She wears a sleeveless blue tunic with a white collar band, a white sash, front and back skirt panels in blue edged in white, dark navy trousers, blue-gray boots and violet-blue arm wraps with fingerless gloves. Three arcs of water make up most of the statue: a tall hook rising behind her and breaking over her head, a band wrapping across her front from her low hand, and a coil spiraling up behind her back, over a churn of water and a slab of cracked tan rock.

This listing is the full 1:10 scale statue, 280 mm tall on the studio's scale sheet. The miniature of the whole scene and the bust are sold as separate listings.

What's in the kit

  • 19 resin pieces in total.
  • Figure, 10 pieces: head, front hair with the loops, flying back hair, torso, two arms, two legs with boots, and the front and back skirt panels.
  • Base and water, 9 pieces: the rock slab, the lower water churn in three sections, two single-piece water arcs and a third arc in three sections.
  • 1:10 scale: 280 mm (11.02 in) tall, 131 mm (5.16 in) wide and 194 mm (7.64 in) long (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build the base first: the rock slab and the three water-churn sections. Dry-fit all the water arcs before any glue.
  • She stands on one boot on top of the churn, with the raised arm, the back hair and the bent leg hanging free. Pin the planted leg.
  • One water arc comes in three sections that meet on a smooth water surface. Plan to fill and sand those seams.
  • Thin parts: the spread fingers, the hair tips, the hair loops and the thin skirt panels.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like