Sculptor's render of the painted design (kit ships unpainted): front view of the whole scene, the helmeted figure standing on the fallen robot head in the rock crater

Chibi Helmeted Caped Villain Resin Garage Kit – Purple Cape, Fallen Giant Robot Head & Rock Crater Base (Unpainted, 14 Pieces)

Full kit, 14 pieces
$117.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the whole scene, the helmeted figure standing on the fallen robot head in the rock crater
  • Sculptor's render of the painted design (kit ships unpainted): front view of the whole scene, the helmeted figure standing on the fallen robot head in the rock crater
  • Sculptor's render (kit ships unpainted): front three-quarter view with more of the robot's gray face, the hose and metal debris on the crater rim
  • Sculptor's render (kit ships unpainted): three-quarter view from his left showing the robot's open panel, wiring and hose, with the cape sweeping back
  • Sculptor's render (kit ships unpainted): side view with the purple cape falling behind him in a long curve and the robot's purple dome end
  • Sculptor's render (kit ships unpainted): high front view looking down on the helmet crest and the segmented band over the robot head
  • Sculptor's render (kit ships unpainted): low front view looking up at the figure standing over the robot's red eye
  • Sculptor's render (kit ships unpainted): front view of the figure from helmet to boots, one hand gripping the cape
  • Sculptor's render (kit ships unpainted): close view of the helmet, studded collar and the gloved hand gripping the cape
  • Sculptor's render (kit ships unpainted): close-up of the face inside the red helmet with purple trim and crest prongs
  • Sculptor's render of the painted design (kit ships unpainted): front view of the whole scene, the helmeted figure standing on the fallen robot head in the rock crater
  • Sculptor's render (kit ships unpainted): front three-quarter view with more of the robot's gray face, the hose and metal debris on the crater rim
  • Sculptor's render (kit ships unpainted): three-quarter view from his left showing the robot's open panel, wiring and hose, with the cape sweeping back
  • Sculptor's render (kit ships unpainted): side view with the purple cape falling behind him in a long curve and the robot's purple dome end
  • Sculptor's render (kit ships unpainted): high front view looking down on the helmet crest and the segmented band over the robot head
  • Sculptor's render (kit ships unpainted): low front view looking up at the figure standing over the robot's red eye
  • Sculptor's render (kit ships unpainted): front view of the figure from helmet to boots, one hand gripping the cape
  • Sculptor's render (kit ships unpainted): close view of the helmet, studded collar and the gloved hand gripping the cape
  • Sculptor's render (kit ships unpainted): close-up of the face inside the red helmet with purple trim and crest prongs
Chibi Helmeted Caped Villain Resin Garage Kit – Purple Cape, Fallen Giant Robot Head & Rock Crater Base (Unpainted, 14 Pieces)

Chibi Helmeted Caped Villain Resin Garage Kit – Purple Cape, Fallen Giant Robot Head & Rock Crater Base (Unpainted, 14 Pieces)

$117.00
KitFull kit, 14 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 14 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi of the helmeted, caped supervillain with power over metal from American superhero comics, in his classic red and purple costume. He stands with his feet planted on a toppled giant robot head, legs apart, his right hand up at his shoulder gripping the edge of his cape and his left arm straight down in a clenched fist. He glares out from under a tall rounded red helmet with two crest prongs rising from the brow, jagged purple trim around the eye opening and long cheek guards, with short gray hair showing at the back. His red bodysuit is sculpted tight to the muscle, with a studded purple collar yoke, a wide purple belt and trunks, long purple gloves with striped cuffs and tall banded purple boots. The long, heavy purple cape falls behind him in S-curves and ends in two curled tails. Under him the robot head lies on its side in a crater of broken rock: a purple dome with a segmented band over the top at one end, and a gray metal face at the other with one red eye, an open panel of colored rings, a ribbed hose, cables and pipes, with metal debris on the rim.

What's in the kit

  • 14 resin pieces in total.
  • Figure, 10 pieces: the head, the helmet, the torso with the collar, the belt and trunks, two forearms with gloved hands, two legs and two boots.
  • Cape, 1 piece.
  • Base, 3 pieces: the fallen robot head, and the rock crater in two halves.
  • Tallest single piece: the cape, 97.9 mm (3.85 in) in the sculptor's file. The sculptor doesn't publish an assembled height or scale, so I don't list one.
  • Rock crater base: 166.0 × 163.0 mm (6.54 × 6.42 in) across, from the sculptor's single-piece file of the same base.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The figure and cape stand on two legs that each join twice, at the waist and at the boot, and then on a rounded robot head. Pin both legs into the boots and both boots into the base.
  • The cape is a large hanging piece on his back. Pin it at the shoulders and check the seam where it meets the torso.
  • The robot head sits down into the crater, so dry-fit it before gluing. The crater comes in two halves with a seam through the rocks.
  • The helmet crest points, the hair spikes at the back and the fingers of the raised hand are thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Chibi Station. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Chibi Station's commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like