Sculptor's render of the painted design (kit ships unpainted): front view of the red-skinned demon hero leaping over the graveyard base, flaming sword raised and stone fist thrown forward

Comic Red Demon Hero Resin Garage Kit – Mid-Leap with Stone Fist & Flaming Sword, Graveyard Serpent Diorama, All Four Heads Included (Unpainted, 36 Pieces)

Full kit with all four heads, 36 pieces
$169.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the red-skinned demon hero leaping over the graveyard base, flaming sword raised and stone fist thrown forward
  • Sculptor's render of the painted design (kit ships unpainted): front view of the red-skinned demon hero leaping over the graveyard base, flaming sword raised and stone fist thrown forward
  • Sculptor's render (kit ships unpainted): the same front view in warm, smoky lighting with the crystals and ooze glowing
  • Sculptor's render (kit ships unpainted): three-quarter view from his right, his leg caught in a fanged serpent's mouth, coat flying and tail curled
  • Sculptor's render (kit ships unpainted): three-quarter view from his left with the roaring face, a skull-faced corpse and crystal spikes on the base
  • Sculptor's render (kit ships unpainted): side view from behind his left shoulder, the coat streaming back over a mossy base and the corpse's raised dagger
  • Studio photo of the sculptor's unpainted test print (kit ships unpainted): the full statue from the front, built with the long-horned crowned head
  • Studio photo of the unpainted test print (kit ships unpainted): rear view showing the underside of the flying coat and the serpent neck holding him up
  • Studio photo of the unpainted test print (kit ships unpainted): close-up of the included head with long ridged curled horns
  • Studio photo of the unpainted test print (kit ships unpainted): close-up of the long-horned head with the small crown of flames
  • Studio photo of the unpainted test print (kit ships unpainted): close-up of the cartoon-style head with flat horn stumps and round blank eyes
  • Sculptor's render of the painted design (kit ships unpainted): front view of the red-skinned demon hero leaping over the graveyard base, flaming sword raised and stone fist thrown forward
  • Sculptor's render (kit ships unpainted): the same front view in warm, smoky lighting with the crystals and ooze glowing
  • Sculptor's render (kit ships unpainted): three-quarter view from his right, his leg caught in a fanged serpent's mouth, coat flying and tail curled
  • Sculptor's render (kit ships unpainted): three-quarter view from his left with the roaring face, a skull-faced corpse and crystal spikes on the base
  • Sculptor's render (kit ships unpainted): side view from behind his left shoulder, the coat streaming back over a mossy base and the corpse's raised dagger
  • Studio photo of the sculptor's unpainted test print (kit ships unpainted): the full statue from the front, built with the long-horned crowned head
  • Studio photo of the unpainted test print (kit ships unpainted): rear view showing the underside of the flying coat and the serpent neck holding him up
  • Studio photo of the unpainted test print (kit ships unpainted): close-up of the included head with long ridged curled horns
  • Studio photo of the unpainted test print (kit ships unpainted): close-up of the long-horned head with the small crown of flames
  • Studio photo of the unpainted test print (kit ships unpainted): close-up of the cartoon-style head with flat horn stumps and round blank eyes
Comic Red Demon Hero Resin Garage Kit – Mid-Leap with Stone Fist & Flaming Sword, Graveyard Serpent Diorama, All Four Heads Included (Unpainted, 36 Pieces)

Comic Red Demon Hero Resin Garage Kit – Mid-Leap with Stone Fist & Flaming Sword, Graveyard Serpent Diorama, All Four Heads Included (Unpainted, 36 Pieces)

$169.00
KitFull kit with all four heads, 36 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design, plus the studio's photos of its own unpainted test prints. Your kit arrives as 36 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the famous red-skinned demon hero from a long-running dark-fantasy comic series and its films, caught at the top of a leap over a graveyard that is being torn open. His gloved left hand swings a flaming sword high over his head and his oversized stone right fist drives straight out in front, with blocky cracked knuckles, round discs across the back of the hand and a banded forearm. One leg is caught in the frilled, fanged mouth of a serpent rising out of the ground, the other kicks back, and his long tail whips out behind him into a hook. His brown leather coat has come off both shoulders and flies back in one long sheet. His face is a full roar with fangs and tongue under a heavy brow, with black sideburns, a goatee and a topknot. He wears a belt with a round lens at the front, a tooled holster with a revolver, leather pouches, a chain of beads, cut-off trousers and buckled boots. The base is a mound of earth and moss with striped serpent bodies and a suckered tentacle, a rotting corpse lying face up, skeletal hands reaching up, a withered arm raising an old dagger, two leaning headstones topped with crosses, a pool of ooze in the center and clusters of crystal spikes at the front and back. All four heads are in the box; swap them as you like: his ground-down horn stumps, long curled horns, long horns with a small crown of flames, and a cartoon-style head.

What's in the kit

  • 36 resin pieces in total.
  • Figure, 7 pieces: the torso, two legs, the left boot, the stone right hand and forearm, the left sword hand and the tail.
  • Heads, 5 pieces: horn stumps, long curled horns, a second long-horned head made to take the crown, the small crown of flames, and the cartoon-style head.
  • Clothing, 6 pieces: the coat in four sections, the cut-off trousers and the belt.
  • Gear, 7 pieces: the flaming sword, the revolver and five belt pouches.
  • Base, 11 pieces: the graveyard base in eleven sections, with the serpents, headstones, corpse, dagger arm and crystal clusters.
  • Studio size: 500 mm (19.69 in) tall, 300 mm (11.81 in) wide and 350 mm (13.78 in) deep (from Tanuki Figures' notes file).
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The whole figure meets the base at a single point, the leg in the serpent's mouth, and leans far out to one side. Build and pin the figure first, then pin that leg deep into the base. Pinning isn't optional on this one.
  • The sword, the stone fist, the four coat sections and the long tail all hang off the figure. Pin the sword into the fist and the hands at the wrists, and dry-fit the coat sections before gluing. All four heads come in the kit; to swap them later, leave the head unglued on its pin or fit a small magnet.
  • The base comes in eleven numbered sections. Dry-fit the whole graveyard before gluing; the moss, rock and serpent textures hide the seams well.
  • Thin parts: the flames along the blade, the flame crown, the crystal spikes, the bead chain and the small pouches. The studio's assembly video is in the download.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like