Sculptor's render of the painted design (kit ships unpainted): full front view of the figure pulling on a yellow glove, standing on stacked rocks over the round base

Comic Book Heroine Resin Garage Kit – White-Streaked Hair, Bomber Jacket & Rock Base (Unpainted, 15 Pieces)

Full kit, 15 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the figure pulling on a yellow glove, standing on stacked rocks over the round base
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the figure pulling on a yellow glove, standing on stacked rocks over the round base
  • Sculptor's render (kit ships unpainted): front view from the rocks up, showing the face, two-tone hair, cropped jacket and suit
  • Sculptor's render (kit ships unpainted): front-right view showing the suit panels, belt and thigh-high boots on the rocks
  • Sculptor's render (kit ships unpainted): left side view with the sleeve patch, the long hair and the bent leg resting on a rock
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the long auburn hair blowing out and the back of the cropped jacket
  • Sculptor's render (kit ships unpainted): right side view showing the belt pouches and the raised leg
  • Sculptor's render (kit ships unpainted): rear view of the full hair sculpt, jacket back, belt pouches and boots
  • Sculptor's render (kit ships unpainted): close-up of the face, headband, quilted jacket, gloves and belt buckle
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the figure pulling on a yellow glove, standing on stacked rocks over the round base
  • Sculptor's render (kit ships unpainted): front view from the rocks up, showing the face, two-tone hair, cropped jacket and suit
  • Sculptor's render (kit ships unpainted): front-right view showing the suit panels, belt and thigh-high boots on the rocks
  • Sculptor's render (kit ships unpainted): left side view with the sleeve patch, the long hair and the bent leg resting on a rock
  • Sculptor's render (kit ships unpainted): rear three-quarter view with the long auburn hair blowing out and the back of the cropped jacket
  • Sculptor's render (kit ships unpainted): right side view showing the belt pouches and the raised leg
  • Sculptor's render (kit ships unpainted): rear view of the full hair sculpt, jacket back, belt pouches and boots
  • Sculptor's render (kit ships unpainted): close-up of the face, headband, quilted jacket, gloves and belt buckle
Comic Book Heroine Resin Garage Kit – White-Streaked Hair, Bomber Jacket & Rock Base (Unpainted, 15 Pieces)

Comic Book Heroine Resin Garage Kit – White-Streaked Hair, Bomber Jacket & Rock Base (Unpainted, 15 Pieces)

$97.00
KitFull kit, 15 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 15 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of a well-known comic book superheroine. She stands with her weight on one straight leg planted among the rocks and the other leg bent, its boot resting on the tallest stone, and pulls a yellow glove up over her raised hand. Her hair is white at the front and on top, running into long auburn curls that blow out behind her, held back with a green headband. She wears a cropped brown leather bomber jacket with quilted shoulders, round patches on the sleeves and loose buckled straps at the hem, over a green bodysuit with a yellow honeycomb-textured center panel. A low brown belt with a round silver buckle and three pouches, yellow gloves and thigh-high yellow boots with green bands finish the outfit. The base is a round gunmetal disc with a silver rim and a sculpted emblem at the front, with three broken gray rocks stacked on top.

What's in the kit

  • 15 resin pieces in total.
  • Figure, 11 pieces: head, hair, headband ties, torso with the jacket, hips and thighs, two forearms, two hands and two boots.
  • Base, 4 pieces: the round base and three rocks.
  • Tallest single piece: the standing leg and boot, 138.5 mm (5.45 in) in the sculptor's file. The finished figure stands taller once the hips, torso, head, rocks and base are added. The sculptor doesn't publish an assembled height, so I don't list one.
  • Base: the round base is 116.6 × 118.0 mm (4.59 × 4.65 in) across in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The whole figure rests on one boot. Pin that boot into the rocks and pin the hips to both boots.
  • The large hair piece hangs off the back of the head and blows out to one side. Pin it.
  • Stack and glue the three rocks on the base first, then dry-fit the figure so the bent leg's boot lands on the top stone.
  • The spread fingers, the headband ties and the hair curl tips are thin and delicate.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like