Sculptor's render of the painted design (kit ships unpainted): front view of the helmeted figure with the spinning hammer ring overhead, standing in swirling cloud on the glowing plinth

Comic Book Hammer Heroine Resin Garage Kit – Two Heads, Two Hammers, Red Cape & Storm Cloud Base (Unpainted, Full Size, 18 Pieces)

Full figure, 18 pieces
$159.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the helmeted figure with the spinning hammer ring overhead, standing in swirling cloud on the glowing plinth
  • Sculptor's render of the painted design (kit ships unpainted): front view of the helmeted figure with the spinning hammer ring overhead, standing in swirling cloud on the glowing plinth
  • Sculptor's render (kit ships unpainted): the figure with the bare head, raising the plain hammer, red cape streaming behind her
  • Sculptor's render (kit ships unpainted): straight front view of the figure with the helmet, showing the breastplate, belt and the three glowing base panels
  • Sculptor's render (kit ships unpainted): straight front view of the figure with the bare head with the plain hammer and the full spread of the cape
  • Sculptor's render of the painted design (kit ships unpainted): front view of the helmeted figure with the spinning hammer ring overhead, standing in swirling cloud on the glowing plinth
  • Sculptor's render (kit ships unpainted): the figure with the bare head, raising the plain hammer, red cape streaming behind her
  • Sculptor's render (kit ships unpainted): straight front view of the figure with the helmet, showing the breastplate, belt and the three glowing base panels
  • Sculptor's render (kit ships unpainted): straight front view of the figure with the bare head with the plain hammer and the full spread of the cape
Comic Book Hammer Heroine Resin Garage Kit – Two Heads, Two Hammers, Red Cape & Storm Cloud Base (Unpainted, Full Size, 18 Pieces)

Comic Book Hammer Heroine Resin Garage Kit – Two Heads, Two Hammers, Red Cape & Storm Cloud Base (Unpainted, Full Size, 18 Pieces)

$159.00
KitFull figure, 18 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 18 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the hammer-wielding heroine from a famous comic book universe. She stands wide-legged in a bank of swirling cloud, one arm straight up with her hammer overhead and the other fist clenched at her shoulder. Her red cape sweeps up behind the raised arm and her blonde hair blows the other way. She wears a dark steel breastplate with an engraved collar, a studded leather belt over ragged rust-brown skirt panels, quilted leggings with shin wraps, and boots with small winged ankle guards. The base is a dark faceted plinth with three glowing panels and Celtic knotwork, with jagged rock and thick carved cloud rising around her boots.

Both heads and both hammers are in the box, so you can build her either way and swap them as you like: the winged silver helmet or her bare head, and a ring of hammer heads that looks like the hammer spinning or the plain hammer. This listing is the full figure on its cloud base. The smaller bust version is sold as a separate listing.

What's in the kit

  • 18 resin pieces in total.
  • Figure, 11 pieces: torso, the legs in a single piece, the skirt with the studded belt, the cape, two arms, the winged helmeted head, the bare head, the spinning hammer ring and the hand that grips it, and the plain hammer with the hand that holds it. Both heads and both hammers are in the box; swap them as you like.
  • Base, 7 pieces: the plinth in four sections and the cloud in three sections.
  • Tallest single piece: the legs, 196.9 mm (7.75 in) in the sculptor's file. The finished figure stands much taller once the torso, head and cloud base are added. The sculptor doesn't publish an assembled height, so I don't list one.
  • Scale: 1:6 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The plinth comes in four sections with glowing panels across the front. Dry-fit, glue and fill those seams before the cloud goes on.
  • The whole figure stands on two boots sunk into the cloud. Pin both boots into the base, and dry-fit to work out whether she goes on before the cloud piece around her boots.
  • The spinning hammer ring is large and heavy and held high on a small hand. Pin the ring into the hand, the hand into the arm and the arm into the shoulder. Both hammers and both heads are in the box; pin the hammer hand and the head without glue if you want to swap them.
  • The cape is a big thin sheet that rises off the shoulders, so pin it. The hair strands, helmet wings and ankle wings are thin and delicate.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like