Sculptor's render of the painted design (kit ships unpainted): full front view of the fighter balancing on one foot above the round neon base with flame sweeps

Fighting Game High-Kick Fighter Resin Garage Kit – One-Foot Stance, Neon Signs & Purple Flame Base (Unpainted, 17 Pieces)

Full kit, 17 pieces
$97.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): full front view of the fighter balancing on one foot above the round neon base with flame sweeps
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the fighter balancing on one foot above the round neon base with flame sweeps
  • Sculptor's render (kit ships unpainted): front view from her left, raised knee and outstretched arm
  • Sculptor's render (kit ships unpainted): side view showing the sash tail and the stack of rubble and signs
  • Sculptor's render (kit ships unpainted): low three-quarter view with the neon signs and flames in the foreground
  • Sculptor's render (kit ships unpainted): front view of the fighter from her buns to her shins, raised knee forward, with the neon signs below
  • Sculptor's render (kit ships unpainted): rear view of the full figure, showing the hair buns, the back markings, the sash tail and the rubble block
  • Sculptor's render (kit ships unpainted): low-angle close-up of her grinning face with a pink streak over one eye
  • Sculptor's render of the painted design (kit ships unpainted): full front view of the fighter balancing on one foot above the round neon base with flame sweeps
  • Sculptor's render (kit ships unpainted): front view from her left, raised knee and outstretched arm
  • Sculptor's render (kit ships unpainted): side view showing the sash tail and the stack of rubble and signs
  • Sculptor's render (kit ships unpainted): low three-quarter view with the neon signs and flames in the foreground
  • Sculptor's render (kit ships unpainted): front view of the fighter from her buns to her shins, raised knee forward, with the neon signs below
  • Sculptor's render (kit ships unpainted): rear view of the full figure, showing the hair buns, the back markings, the sash tail and the rubble block
  • Sculptor's render (kit ships unpainted): low-angle close-up of her grinning face with a pink streak over one eye
Fighting Game High-Kick Fighter Resin Garage Kit – One-Foot Stance, Neon Signs & Purple Flame Base (Unpainted, 17 Pieces)

Fighting Game High-Kick Fighter Resin Garage Kit – One-Foot Stance, Neon Signs & Purple Flame Base (Unpainted, 17 Pieces)

$97.00
KitFull kit, 17 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 17 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the grinning martial artist from a famous fighting game series. She balances on one bare foot on a slab of rubble with her other knee drawn up high, one clawed hand by her face and the other arm flung out to the side. Her black hair is tied in two horn-shaped buns with pink bands, and a hot pink streak falls across one eye. She wears a cropped pale gray jacket with pink piping, very full black-and-gray harem trousers with zippers down the seams, a wide black sash with a metal buckle and a long trailing tail, a spiked choker and fingerless gloves with spiked cuffs. The base is a round metal drum with a glowing strip and a lit nameplate, broken concrete and brick, three neon signs reading PLAY, FIGHT and KO, and two curling flame sweeps at the front.

What's in the kit

  • 17 resin pieces in total.
  • Figure, 11 pieces: head and a second hair piece, torso, two arms, two gloved hands, the hips and both legs in a single piece, two feet, and the waist sash with its tail.
  • Base, 6 pieces: the round drum, the rubble platform, two more rubble and sign sections, and the two flame sweeps.
  • Tallest single piece: the legs, 182.4 mm (7.18 in) in the sculptor's file. The finished figure stands taller once the torso, head and base are added. The sculptor doesn't publish an assembled height, so I don't list one.
  • Base: the round drum is 155.5 × 157.1 mm (6.12 × 6.19 in) across in the sculptor's file.
  • Scale: about 1:6 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:6 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • She stands on one bare foot. Pin the standing foot into the leg and into the rubble.
  • The outstretched arm and the long sash tail reach well out from the body. Pin the arm at the shoulder.
  • Both shoulder joins sit on bare skin with painted markings, so fill and sand them before you paint.
  • The base has four sections and two flame pieces to line up, so dry-fit it before gluing. The flames and the glove spikes are thin.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by 3DMoon (3Dmoonn). I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in 3DMoon's merchant tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like