Sculptor's render of the painted design (kit ships unpainted): front view of the baby dinosaur sitting with his legs splayed, a toy dinosaur in each fist, with toy bricks and a plush dino around him

Baby Dinosaur Resin Garage Kit – Sitting with Toy Dinos, Plush Dino, Building Bricks & Toy Train (Unpainted, 16 Pieces)

Full kit, 16 pieces
$65.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the baby dinosaur sitting with his legs splayed, a toy dinosaur in each fist, with toy bricks and a plush dino around him
  • Sculptor's render of the painted design (kit ships unpainted): front view of the baby dinosaur sitting with his legs splayed, a toy dinosaur in each fist, with toy bricks and a plush dino around him
  • Sculptor's render (kit ships unpainted): three-quarter view from his right, with his spotted tail stretched along the floor
  • Sculptor's render (kit ships unpainted): three-quarter view from his left, holding a red toy dinosaur to his mouth, with the plush dino and bricks beside him
  • Sculptor's render (kit ships unpainted): back view from above showing the spots on his head, his curled tail and the toys around him
  • Sculptor's render (kit ships unpainted): close-up of the face with big violet eyes, a frowning brow and an open grin
  • Sculptor's render of the painted design (kit ships unpainted): front view of the baby dinosaur sitting with his legs splayed, a toy dinosaur in each fist, with toy bricks and a plush dino around him
  • Sculptor's render (kit ships unpainted): three-quarter view from his right, with his spotted tail stretched along the floor
  • Sculptor's render (kit ships unpainted): three-quarter view from his left, holding a red toy dinosaur to his mouth, with the plush dino and bricks beside him
  • Sculptor's render (kit ships unpainted): back view from above showing the spots on his head, his curled tail and the toys around him
  • Sculptor's render (kit ships unpainted): close-up of the face with big violet eyes, a frowning brow and an open grin
Baby Dinosaur Resin Garage Kit – Sitting with Toy Dinos, Plush Dino, Building Bricks & Toy Train (Unpainted, 16 Pieces)

Baby Dinosaur Resin Garage Kit – Sitting with Toy Dinos, Plush Dino, Building Bricks & Toy Train (Unpainted, 16 Pieces)

$65.00
KitFull kit, 16 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 16 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the mischievous baby dinosaur from a classic early-1990s family sitcom performed with puppets. He sits on the floor with his legs splayed wide and his big feet tipped up, leaning in over his round belly with a small toy dinosaur in each fist: a triceratops in one and an upright dinosaur in the other, which he holds up to his mouth. His big bald head has a heavy ridged brow pulled into a frown, large round eyes, a short snout and an open grin with two small teeth, and spots run over his head, cheeks and tail. He wears a short, buttoned shirt and a cloth diaper with elastic bands, and his long, ridged tail runs out behind him and curls up at the tip. There is no base: he sits straight on the shelf, with loose toys around him: a plush dinosaur with rounded spikes down its back, two toy building bricks and a small toy train.

What's in the kit

  • 16 resin pieces in total.
  • Figure, 10 pieces: head, upper body in the shirt, the diaper, two arms, two separate finger pieces, two legs and the tail.
  • Hand-held toys, 2 pieces: a small toy triceratops and a small upright toy dinosaur.
  • Loose toys, 4 pieces: a plush dinosaur, a 2x4 toy brick, a 2x2 toy brick and a small toy train. The renders show more bricks in several colors and a toy shovel; those aren't in the files, so the kit has one of each brick and no shovel.
  • Studio size: 150 mm (5.91 in) tall, 210 mm (8.27 in) wide and 280 mm (11.02 in) deep (from Tanuki Figures' notes file).
  • Scale: about 1:10 (estimated). The sculptor doesn't publish a scale, so this is my estimate of the closest standard scale based on the model's measurements. It may not look in scale next to other 1:10 figures, and scale can differ from one creator to another.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • There's no base: he sits on the diaper, both heels and the tail. Dry-fit the legs and tail on a flat surface before gluing so he doesn't rock.
  • Each arm reaches forward with a toy in the fist, and the head leans forward over the chest. Pin the head and both arms.
  • The two hand-held toys and the two finger pieces are tiny, and the triceratops has thin horns and legs. If the finger pieces close over the toys, fit the toys first.
  • The diaper is the largest part in the kit.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by Tanuki Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in Tanuki Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like