Sculptor's render of the painted design (kit ships unpainted): the full scene from the front, the crowned king seated in the grass at left and the helmeted knight hopping on one leg at right, with both speech bubbles above them

Chibi Comedy Knight and King Resin Garage Kit – Armless Helmed Knight, Seated Crowned King, Two Speech Bubbles & Grass Base (Unpainted, 9 Pieces)

Full kit, 9 pieces
$54.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): the full scene from the front, the crowned king seated in the grass at left and the helmeted knight hopping on one leg at right, with both speech bubbles above them
  • Sculptor's render of the painted design (kit ships unpainted): the full scene from the front, the crowned king seated in the grass at left and the helmeted knight hopping on one leg at right, with both speech bubbles above them
  • Sculptor's render (kit ships unpainted): gray front view of the whole scene with both speech bubbles, showing the sculpted lettering
  • Sculptor's render (kit ships unpainted): closer painted view of the two figures, with the severed arm and the sword lying in the grass
  • Sculptor's render (kit ships unpainted): painted view from the front left, the knight's two sleeve stumps and the boar emblem on his chest
  • Sculptor's render (kit ships unpainted): low painted view of the seated king with his hand raised and the severed arm beside him
  • Sculptor's render (kit ships unpainted): close-up of the king's face under the gold crown, with the orange beard and gray mail hood
  • Sculptor's render (kit ships unpainted): close-up of the knight in his black bucket helm with round yellow eyes, standing on one leg
  • Sculptor's render (kit ships unpainted): gray view from the king's side with the knight's raised leg in profile
  • Sculptor's render (kit ships unpainted): gray three-quarter view from the knight's side, showing the bushes and blood pools on the base
  • Sculptor's render (kit ships unpainted): gray rear view showing the blank backs of both speech bubbles and the mail hood down the king's back
  • Sculptor's render of the painted design (kit ships unpainted): the full scene from the front, the crowned king seated in the grass at left and the helmeted knight hopping on one leg at right, with both speech bubbles above them
  • Sculptor's render (kit ships unpainted): gray front view of the whole scene with both speech bubbles, showing the sculpted lettering
  • Sculptor's render (kit ships unpainted): closer painted view of the two figures, with the severed arm and the sword lying in the grass
  • Sculptor's render (kit ships unpainted): painted view from the front left, the knight's two sleeve stumps and the boar emblem on his chest
  • Sculptor's render (kit ships unpainted): low painted view of the seated king with his hand raised and the severed arm beside him
  • Sculptor's render (kit ships unpainted): close-up of the king's face under the gold crown, with the orange beard and gray mail hood
  • Sculptor's render (kit ships unpainted): close-up of the knight in his black bucket helm with round yellow eyes, standing on one leg
  • Sculptor's render (kit ships unpainted): gray view from the king's side with the knight's raised leg in profile
  • Sculptor's render (kit ships unpainted): gray three-quarter view from the knight's side, showing the bushes and blood pools on the base
  • Sculptor's render (kit ships unpainted): gray rear view showing the blank backs of both speech bubbles and the mail hood down the king's back
Chibi Comedy Knight and King Resin Garage Kit – Armless Helmed Knight, Seated Crowned King, Two Speech Bubbles & Grass Base (Unpainted, 9 Pieces)

Chibi Comedy Knight and King Resin Garage Kit – Armless Helmed Knight, Seated Crowned King, Two Speech Bubbles & Grass Base (Unpainted, 9 Pieces)

$54.00
KitFull kit, 9 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 9 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi scene from a classic British comedy film about knights on a quest: the famous duel that ends with one knight refusing to give up. On the right, a knight in a black tunic and a flat-topped black bucket helm hops on one leg with the other kicked up behind him. Both of his sleeves end in bone stumps, and two round yellow eyes glare out of the helm's slot above a grid of breathing holes, with a red boar's head on his chest and blood splashed down the helm and hem. On the left, the king sits in the grass with his legs out in front of him and one hand raised, looking up at the knight with his brows down and mouth open. He wears a gold studded crown over a gray mail hood, an orange-red beard and moustache, a cream tabard with a gold sun on the chest, mail sleeves, gold cuffs and brown boots. A sword with a bloodied tip and the knight's severed arm lie on the grass between them. Two speech bubbles rise over their heads with the scene's lines sculpted in raised lettering. The base is a round slab of bright grass with a textured earth rim, bushes with orange berries, a large leaf, pebbles, small flowers and pools of blood.

What's in the kit

  • 9 resin pieces in total.
  • Knight, 2 pieces: the helm, and the body with both legs and sleeve stumps.
  • King, 2 pieces: the head with the crown, mail hood and beard, and the seated body.
  • Speech bubbles, 2 pieces: one over each figure, with raised lettering on the front.
  • Base, 1 piece: the round grass base with bushes and blood pools.
  • Accessories, 2 pieces: the sword and the severed arm.
  • Studio size: 85 mm (3.35 in) tall, 67 mm (2.64 in) wide and 84 mm (3.31 in) long (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • Each speech bubble hangs off a thin curved tail that meets the top of a head, a small contact point holding a flat disc out in the air. Use a slow glue and hold it in place, or pin it.
  • The lettering is raised on the flat face of each bubble. A white base coat and a careful edge pass in the letter color picks it out; a wash will pool between the letters.
  • The sword and the severed arm are small loose pieces; the blood pools on the base show where they go.
  • The base has a broad flat underside. I print it hollow, so fill the small drain holes before priming.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like