Sculptor's render of the painted design (kit ships unpainted): front view of the black dragon wrapped around the ruined stone tower, wings spread and tail arched overhead

Video Game Black Dragon Resin Garage Kit – Spread Wings, Roaring Jaws & Ruined Stone Watchtower Diorama (Unpainted, 1:10 Scale, 23 Pieces)

1:10 scale, 23 pieces
$115.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the black dragon wrapped around the ruined stone tower, wings spread and tail arched overhead
  • Sculptor's render of the painted design (kit ships unpainted): front view of the black dragon wrapped around the ruined stone tower, wings spread and tail arched overhead
  • Sculptor's render (kit ships unpainted): side view with one wing laid open and the tail passing over the broken top of the tower
  • Sculptor's render (kit ships unpainted): view from the other side with the head low and the wing folded forward
  • Sculptor's render (kit ships unpainted): rear view of the tower with its spiral stairs and roots, both wings showing their red-ribbed undersides
  • Sculptor's render (kit ships unpainted): low side view of the spread wing and spiked back in falling snow, jaws open
  • Sculptor's render (kit ships unpainted): the roaring head from the front between the two raised wings
  • Sculptor's render (kit ships unpainted): close-up of the open-jawed head in profile with the horns and teeth
  • Sculptor's render (kit ships unpainted): tight close-up of the open mouth, tongue and the spikes under the chin
  • Sculptor's render (kit ships unpainted): unpainted gray front view showing the scale texture and brickwork
  • Sculptor's render (kit ships unpainted): unpainted gray rear view of the tower, stairs and doorway with the wings to either side
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 split diorama color-coded by part, with the studio's size of 261 mm tall, 237 mm wide and 276 mm long
  • Sculptor's render of the painted design (kit ships unpainted): front view of the black dragon wrapped around the ruined stone tower, wings spread and tail arched overhead
  • Sculptor's render (kit ships unpainted): side view with one wing laid open and the tail passing over the broken top of the tower
  • Sculptor's render (kit ships unpainted): view from the other side with the head low and the wing folded forward
  • Sculptor's render (kit ships unpainted): rear view of the tower with its spiral stairs and roots, both wings showing their red-ribbed undersides
  • Sculptor's render (kit ships unpainted): low side view of the spread wing and spiked back in falling snow, jaws open
  • Sculptor's render (kit ships unpainted): the roaring head from the front between the two raised wings
  • Sculptor's render (kit ships unpainted): close-up of the open-jawed head in profile with the horns and teeth
  • Sculptor's render (kit ships unpainted): tight close-up of the open mouth, tongue and the spikes under the chin
  • Sculptor's render (kit ships unpainted): unpainted gray front view showing the scale texture and brickwork
  • Sculptor's render (kit ships unpainted): unpainted gray rear view of the tower, stairs and doorway with the wings to either side
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 split diorama color-coded by part, with the studio's size of 261 mm tall, 237 mm wide and 276 mm long
Video Game Black Dragon Resin Garage Kit – Spread Wings, Roaring Jaws & Ruined Stone Watchtower Diorama (Unpainted, 1:10 Scale, 23 Pieces)

Video Game Black Dragon Resin Garage Kit – Spread Wings, Roaring Jaws & Ruined Stone Watchtower Diorama (Unpainted, 1:10 Scale, 23 Pieces)

$115.00
Kit1:10 scale, 23 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 23 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the ancient black dragon foretold to end the world in a famous open-world fantasy role-playing game. He clings to a broken round watchtower of gray stone brick, his body wrapped around one side of it and his head thrust low and forward with the jaws wide open, showing rows of bone-colored teeth and a long tongue. Two heavy horns sweep back from the skull, a crest of tall spikes runs down the spine, and the tail climbs the back of the tower, passes over its broken top and ends in a spiked tip high above everything else. Both wings are thrown out to the sides, one laid open almost flat and the other raised with its claw hooked over. The hide is sculpted as layered, rippled plates with deep grooves, which the studio paints near-black with a red-orange glow in the grooves and red eyes. The tower has a spiral staircase wrapping its outside, a doorway at ground level, roots climbing the brickwork, and snow on the ledges and on the rubble at its foot. This listing is the full 1:10 scale diorama. The miniature is sold as a separate listing.

What's in the kit

  • 23 resin pieces in total.
  • Dragon, 15 pieces: the head, neck, body, spine crest and two legs, one wing in four sections, the other wing in three sections, and the tail in two halves.
  • Tower base, 8 pieces: the ruined tower, its spiral stairs and the snowy ground in eight stacked sections.
  • 1:10 scale: 261 mm (10.28 in) tall, 237 × 276 mm (9.33 × 10.87 in) footprint (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • The 1:10 tower base stacks from eight sections, with the stairs running across the joins. Dry-fit the whole tower and line up the brickwork before you glue.
  • At 1:10 the wings come in seven sections, and the membrane seams land on smooth surfaces. Plan to fill and sand them.
  • The tail's tip half reaches out over the top of the tower. Pin the two tail halves together and pin the tail into the body.
  • Thin parts: the teeth, the claw tips and the spikes on the spine crest and tail tip.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like