Studio scale and parts sheet (kit ships unpainted): the miniature standing in gray beside the 1:10 statue, labelled miniature 93 mm tall, 75 mm wide and 80 mm long, with the parts of each version laid out

Video Game Hooded Sorceress Resin Garage Kit – Outstretched Hand, Patterned Cloak & Gnarled Tree Stone Platform (Unpainted, Miniature, 11 Pieces)

Miniature, 11 pieces
$39.00
Skip to product information
Studio scale and parts sheet (kit ships unpainted): the miniature standing in gray beside the 1:10 statue, labelled miniature 93 mm tall, 75 mm wide and 80 mm long, with the parts of each version laid out
  • Studio scale and parts sheet (kit ships unpainted): the miniature standing in gray beside the 1:10 statue, labelled miniature 93 mm tall, 75 mm wide and 80 mm long, with the parts of each version laid out
  • Sculptor's render of the painted design (kit ships unpainted): front view of the hooded sorceress reaching out, the gnarled tree behind her on the stone platform. The miniature is the same sculpt at 93 mm tall.
  • Sculptor's render of the painted design (kit ships unpainted): side view along the outstretched arm, the teal cloak lining pulled out. The miniature is the same sculpt at 93 mm tall.
  • Sculptor's render of the painted design (kit ships unpainted): rear three-quarter view of the patterned cloak, the reaching arm and the tree. The miniature is the same sculpt at 93 mm tall.
  • Studio scale and parts sheet (kit ships unpainted): the miniature standing in gray beside the 1:10 statue, labelled miniature 93 mm tall, 75 mm wide and 80 mm long, with the parts of each version laid out
  • Sculptor's render of the painted design (kit ships unpainted): front view of the hooded sorceress reaching out, the gnarled tree behind her on the stone platform. The miniature is the same sculpt at 93 mm tall.
  • Sculptor's render of the painted design (kit ships unpainted): side view along the outstretched arm, the teal cloak lining pulled out. The miniature is the same sculpt at 93 mm tall.
  • Sculptor's render of the painted design (kit ships unpainted): rear three-quarter view of the patterned cloak, the reaching arm and the tree. The miniature is the same sculpt at 93 mm tall.
Video Game Hooded Sorceress Resin Garage Kit – Outstretched Hand, Patterned Cloak & Gnarled Tree Stone Platform (Unpainted, Miniature, 11 Pieces)

Video Game Hooded Sorceress Resin Garage Kit – Outstretched Hand, Patterned Cloak & Gnarled Tree Stone Platform (Unpainted, Miniature, 11 Pieces)

$39.00
KitMiniature, 11 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 11 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the hooded, orange-haired sorceress from a famous fantasy adventure game series, in her tall, blue-gray-skinned form. She stands with her weight on one leg on a carved stone platform, her right arm thrown straight out toward the viewer with the fingers spread, and her left hand gripping a fold of her cloak and pulling it out to the side. Long orange hair spills from under the hood and is gathered by a small gold clasp, and a bronze crown with two thin winged crests and a forehead ornament with a red stone sits over her face. Her eyes are orange-red with mauve lids and her lips are purple. The hooded black cloak has raised pattern work in pink-beige and teal with a gold edge and a flat teal lining. Under it she wears a black wrap top with a torn lower edge, a gold segmented belt with a knotted clasp holding long patterned front and back panels, and a gold anklet; she is barefoot, and teal and red markings are sculpted into her skin. The base is a round stepped stone platform with a carved spiral, cracked blocks and wrapping roots, with a gnarled tree that grows up behind her and leans over to one side under four leafy canopies. This listing is the studio's miniature of the whole scene, 11 pieces: the same sculpt at a smaller size, with the platform, roots and tree as a single piece. The studio's sheet gives the miniature as 93 mm tall. The 1:10 scale statue is sold as a separate listing.

What's in the kit

  • 11 resin pieces in total.
  • Figure, 5 pieces: head, upper body, two legs and the left hand gripping the cloak.
  • Cloak and skirt, 5 pieces: the back of the cloak, two front cloak panels, and the front and back skirt panels.
  • Base, 1 piece: the stone platform with the roots and the tree.
  • Miniature: 93 mm (3.66 in) tall, 75 × 80 mm (2.95 × 3.15 in) footprint (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The five cloak and skirt panels are very thin sheets and the hand is tiny. Dry-fit the panels around the body before gluing, and use tweezers.
  • The crown crests and the reaching fingers are the finest details at this size. Take the supports off gently.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like