Sculptor's render of the painted design (kit ships unpainted): front view of the 1:10 statue, the hooded sorceress reaching out with one hand on a stone platform under a gnarled tree

Video Game Hooded Sorceress Resin Garage Kit – Outstretched Hand, Patterned Cloak & Gnarled Tree Stone Platform (Unpainted, 1:10 Scale, 23 Pieces)

1:10 scale, 23 pieces
$90.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): front view of the 1:10 statue, the hooded sorceress reaching out with one hand on a stone platform under a gnarled tree
  • Sculptor's render of the painted design (kit ships unpainted): front view of the 1:10 statue, the hooded sorceress reaching out with one hand on a stone platform under a gnarled tree
  • Sculptor's render (kit ships unpainted): side view along the outstretched arm, the teal cloak lining pulled out to the side
  • Sculptor's render (kit ships unpainted): unpainted gray front view of the full 1:10 sculpt
  • Sculptor's render (kit ships unpainted): gray three-quarter view with the tree canopies behind her
  • Sculptor's render (kit ships unpainted): gray view from her right, the reaching arm and the pattern work on the cloak
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the patterned cloak, the reaching arm and the gnarled tree
  • Sculptor's render (kit ships unpainted): rear view of the cloak's large back pattern behind the tree trunk
  • Sculptor's render (kit ships unpainted): gray rear view of the cloak and the twisting tree trunk
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 statue in gray with the miniature beside it, labelled 1:10 scale 215 mm tall, and the 23 parts of the 1:10 split laid out
  • Sculptor's render of the painted design (kit ships unpainted): front view of the 1:10 statue, the hooded sorceress reaching out with one hand on a stone platform under a gnarled tree
  • Sculptor's render (kit ships unpainted): side view along the outstretched arm, the teal cloak lining pulled out to the side
  • Sculptor's render (kit ships unpainted): unpainted gray front view of the full 1:10 sculpt
  • Sculptor's render (kit ships unpainted): gray three-quarter view with the tree canopies behind her
  • Sculptor's render (kit ships unpainted): gray view from her right, the reaching arm and the pattern work on the cloak
  • Sculptor's render (kit ships unpainted): rear three-quarter view of the patterned cloak, the reaching arm and the gnarled tree
  • Sculptor's render (kit ships unpainted): rear view of the cloak's large back pattern behind the tree trunk
  • Sculptor's render (kit ships unpainted): gray rear view of the cloak and the twisting tree trunk
  • Studio scale and parts sheet (kit ships unpainted): the 1:10 statue in gray with the miniature beside it, labelled 1:10 scale 215 mm tall, and the 23 parts of the 1:10 split laid out
Video Game Hooded Sorceress Resin Garage Kit – Outstretched Hand, Patterned Cloak & Gnarled Tree Stone Platform (Unpainted, 1:10 Scale, 23 Pieces)

Video Game Hooded Sorceress Resin Garage Kit – Outstretched Hand, Patterned Cloak & Gnarled Tree Stone Platform (Unpainted, 1:10 Scale, 23 Pieces)

$90.00
Kit1:10 scale, 23 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 23 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art statue of the hooded, orange-haired sorceress from a famous fantasy adventure game series, in her tall, blue-gray-skinned form. She stands with her weight on one leg on a carved stone platform, her right arm thrown straight out toward the viewer with the fingers spread, and her left hand gripping a fold of her cloak and pulling it out to the side. Long orange hair spills from under the hood and is gathered by a small gold clasp, and a bronze crown with two thin winged crests and a forehead ornament with a red stone sits over her face. Her eyes are orange-red with mauve lids and her lips are purple. The hooded black cloak has raised pattern work in pink-beige and teal with a gold edge and a flat teal lining. Under it she wears a black wrap top with a torn lower edge, a gold segmented belt with a knotted clasp holding long patterned front and back panels, and a gold anklet; she is barefoot, and teal and red markings are sculpted into her skin. The base is a round stepped stone platform with a carved spiral, cracked blocks and wrapping roots, with a gnarled tree that grows up behind her and leans over to one side under four leafy canopies. This listing is the 1:10 scale statue, 23 pieces. The miniature of the same scene is sold as a separate listing.

What's in the kit

  • 23 resin pieces in total.
  • Figure, 13 pieces: head, bangs, long hair, hood, the crown crests and forehead ornament, two small side hair pieces, torso, two arms, the left hand gripping the cloak and two legs.
  • Cloak and skirt, 5 pieces: the back of the cloak, two front cloak panels, and the front and back skirt panels.
  • Base, 5 pieces: the stone platform, the root mass and the tree in three sections with its canopies.
  • 1:10 scale: 215 mm (8.46 in) tall, 173 × 183 mm (6.81 × 7.20 in) footprint (from the studio's scale sheet).
  • Scale: 1:10 (from the studio). Scale isn't standardized, so figures of the same scale from different creators may not match exactly.

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: advanced

  • Build the base first: the stone platform, the root mass, then the three tree sections. Dry-fit her feet on the platform before gluing the tree, which leans over her.
  • The reaching right arm is long, thin and held straight out. Pin the shoulder.
  • The cloak back and the four cloak and skirt panels are thin sheets. Plan to fill and sand the seams where they meet.
  • The crown crests and forehead ornament are very thin and go on last, with tweezers.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like