Sculptor's render of the painted design (kit ships unpainted): the whole stage scene: a crowned purple ribbon queen coiled around a princess, with the mallet-swinging hero, a masked mouse and the rest of the paper-style cast around her on a riveted wooden stage

Video Game Chibi Paper-Style Hero Party Resin Garage Kit – Crowned Ribbon Queen, Mallet Hero & Theater Stage Diorama (Unpainted, 16 Pieces)

Full kit, 16 pieces
$69.00
Skip to product information
Sculptor's render of the painted design (kit ships unpainted): the whole stage scene: a crowned purple ribbon queen coiled around a princess, with the mallet-swinging hero, a masked mouse and the rest of the paper-style cast around her on a riveted wooden stage
  • Sculptor's render of the painted design (kit ships unpainted): the whole stage scene: a crowned purple ribbon queen coiled around a princess, with the mallet-swinging hero, a masked mouse and the rest of the paper-style cast around her on a riveted wooden stage
  • Sculptor's render (kit ships unpainted): gray front view of the full diorama with all eight characters and the stone arches
  • Sculptor's render (kit ships unpainted): gray three-quarter view from the wind spirit's end of the stage
  • Sculptor's render (kit ships unpainted): gray side view showing the twist of the ribbon coils and the mouse perched on the queen's hand
  • Sculptor's render (kit ships unpainted): gray rear view through the two stone arches, with the floor of grasping hands
  • Sculptor's render (kit ships unpainted): closer view of the crown, the coiled ribbon, the hero with his mallet and the characters at the front of the stage
  • Sculptor's render of the painted design (kit ships unpainted): the whole stage scene: a crowned purple ribbon queen coiled around a princess, with the mallet-swinging hero, a masked mouse and the rest of the paper-style cast around her on a riveted wooden stage
  • Sculptor's render (kit ships unpainted): gray front view of the full diorama with all eight characters and the stone arches
  • Sculptor's render (kit ships unpainted): gray three-quarter view from the wind spirit's end of the stage
  • Sculptor's render (kit ships unpainted): gray side view showing the twist of the ribbon coils and the mouse perched on the queen's hand
  • Sculptor's render (kit ships unpainted): gray rear view through the two stone arches, with the floor of grasping hands
  • Sculptor's render (kit ships unpainted): closer view of the crown, the coiled ribbon, the hero with his mallet and the characters at the front of the stage
Video Game Chibi Paper-Style Hero Party Resin Garage Kit – Crowned Ribbon Queen, Mallet Hero & Theater Stage Diorama (Unpainted, 16 Pieces)

Video Game Chibi Paper-Style Hero Party Resin Garage Kit – Crowned Ribbon Queen, Mallet Hero & Theater Stage Diorama (Unpainted, 16 Pieces)

$69.00
KitFull kit, 16 pieces

Printed to order. This listing shows as sold out until the next print run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. No pre-orders and nothing to pay up front. How it works

IMPORTANT: THIS IS AN UNPAINTED, UNASSEMBLED RAW RESIN KIT. IT IS NOT A FINISHED FIGURE.

The pictures are the sculptor's digital renders of the painted design. Your kit arrives as 16 separate pieces of plain, single-color resin. It is:

  • Unassembled: you glue the pieces together yourself.
  • Unprimed: it needs primer before paint.
  • Unsanded: seams and surfaces need sanding.
  • Unpainted: all painting is up to you.

Expect supports and support marks. Some parts may ship with supports still attached to make sure they do not get damaged during shipping. You may need to sand parts to fully remove supports or fill marks where supports attached. You will need to prime with an appropriate primer.

This kit is for people who want the full experience of finishing a 3D printed kit without owning a printer. It’s also a good way to find out whether the hobby is for you, and what finishing a printed model really takes, before you buy a printer of your own.

A fan-art chibi diorama of the final battle from a classic paper-craft role-playing game, set on a round theater stage. Every character is modeled as a flat paper cut-out with an outlined edge. At the center a shadowy queen rises from the stage as a twisting purple ribbon, with a tall gold three-point crown set with a pink gem on a purple face with slit eyes and a wide grin, and two large flat hands branching off the ribbon. Her coils wrap a blonde princess in a pink gown, who has both hands up in alarm, and a crowd of small grasping hands rises from the floor around her. On one of the queen's hands the plumber hero in a red cap and blue overalls swings a big wooden mallet overhead, and on the other perches a white mouse thief in a red mask and cape, her tail curled into a heart. Around the foot of the ribbon stand the hero's party and a rival: a little mushroom-creature archaeologist with a blonde ponytail and a helmet with a headlamp, a turtle in a blue hoodie with a green shell, a plump purple wind spirit with big curled hair and a gold necklace, and a round purple villain in goggles pointing across the scene. Two blue-gray stone arches stand at the back. The base is a riveted wooden stage with a lobe at one end and a step at the other.

What's in the kit

  • 16 resin pieces in total.
  • Characters, 7 pieces: the mallet-swinging hero, the princess, the archaeologist, the turtle, the wind spirit, the mouse thief and the goggled villain, each in a single piece.
  • Ribbon queen, 6 pieces: the crowned head, the upper and lower ribbon coils, the two large hands and the floor of grasping hands.
  • Base and scene, 3 pieces: the stage and the two stone arches.
  • Studio size: 100 mm (3.94 in) tall, 79 × 121 mm (3.11 × 4.76 in) footprint (from the studio's scale sheet).

About the sizes: every measurement above comes from the sculptor's own files or the studio's published size information for the unprinted model. Your printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

Skill level: intermediate

  • The queen goes together from the stage up: the floor of hands, the lower coil, the upper coil, then the crowned head. Dry-fit the coils and the two arches together before gluing, since they share the same patch of stage.
  • Two characters perch on the queen's hands, which stick out from the ribbon. Pin and glue each hand before setting a character on top.
  • The characters are flat cut-outs a few millimeters thick. The crown points, the mallet handle, the mouse's heart-shaped tail and the pointing arm are the thin spots.
  • The many small fingers on the floor of hands take patience when removing supports.

You'll need (not included): sandpaper or sanding sticks, flush cutters, CA glue or epoxy, primer, paints, and brass rod if you pin the joints.

How ordering works

Every kit is printed to order in small runs, based on waitlist demand. This listing shows as out of stock until the next run is ready. Tap Notify me and leave your email, and I'll let you know when it's in stock. There are no pre-orders. You're never charged for a kit that hasn't been printed.

Shipping and returns

  • Free shipping to addresses in the 50 US states, Washington, DC, and military APO/FPO addresses.
  • International or US territory address? You can use a US package forwarding service. My responsibility ends when the package is delivered to the forwarder’s US address. Anything after that is between you and the forwarding service.
  • 30-day free returns. If the kit isn't for you, send it back within 30 days of delivery, unassembled and unsanded, and I'll send you a prepaid return label.

Sculptor credit and license

This sculpt is by NomNom Figures. I print it from the sculptor's original files and sell it under the commercial license that comes with my membership in NomNom Figures' commercial tier on Patreon. Please support the artist:

Fan art notice: this is an unofficial, fan-made sculpture. I don't own, and claim no rights to, the character or the source material it's based on. All rights to them belong to their respective owners, who have not endorsed and are not affiliated with this product.

You may also like